Linux ACP Modem (Mwave) mini-HOWTO

Mike Sullivan

sullivam@us.ibm.com

Paul Schroeder

paulsch@us.ibm.com

Joy Yokley - Edited document and coverted to DocBook v4.1 (SGML).

2001-01-12

Revision History
Revision .11	2002-07-18	Revised by: PBS

Revision .10	2001-07-18	Revised by: PBS

Revision .09	2001-05-21	Revised by: PBS

Revision .08	2001-05-09	Revised by: JEY

Revision .07	2001-04-30	Revised by: JEY

This document describes how to build, setup, and use the driver and user space application necessary for using the ACP (Mwave) Modem in the IBM Thinkpad™ 600, 600E, and 770 models which include the on board ACP modem hardware. The latest version of this document can always be found at http://www.ibm.com/linux/ltc/

Table of Contents

1. General Information and Hardware Requirements

1.1. Introduction
1.2. Credits
1.3. Where Can I Get the Latest Version of this Driver?
1.4. Are There Any Other Resources?
1.5. Copyright Notice and Disclaimer
1.6. Which Systems are Supported
1.7. Features of the Modem

2. Compilation, Installation, and Startup

2.1. Prerequisites
2.2. Building and Installing Source
2.3. Setting Things Up
2.4. Runtime

3. Resolving Installation and Configuration Problems

3.1. DSP Does Not Start
3.2. Resource Conflicts
3.3. Not Connecting at Specified Starting Speed
3.4. Dialer Application Cannot Detect Serial Port
3.5. PPP Errors Using 2.4.0 Version of the Kernel

4. Debugging Tips

4.1. Error Logs
4.2. Tracing

5. Test Claims

6. List of Supported Countries

7. Trademarks

		Next
		General Information and Hardware Requirements

mirror server hosted at Truenetwork, Russian Federation.