Chapter 4. Configuring the other internal to-be MASQed machines

Table of Contents
4.1. Configuring Microsoft Windows 95 and OSR2
4.2. Configuring Windows NT
4.3. Configuring Windows for Workgroup 3.11
4.4. Configuring UNIX Based Systems
4.5. Configuring DOS using NCSA Telnet package
4.6. Configuring MacOS Based System Running MacTCP
4.7. Configuring MacOS Based System Running Open Transport
4.8. Configuring Novell network using DNS
4.9. Configuring OS/2 Warp
4.10. Configuring OS/400 on a IBM AS/400
4.11. Configuring Other Systems

Besides setting the appropriate IP address for each internal MASQed machine (either statically or though DHCP), you should also set each internal machine with the appropriate gateway IP address of the Linux MASQ server and required DNS servers. In general, this is rather straight forward. You simply enter the address of your Linux host (192.168.0.1 is used throughout this HOWTO) as the machine's gateway address.

For the Domain Name Service (DNS), you add in any DNS servers that are available to you to use. The most apparent one(s) should be the DNS servers that your Linux server uses. You can optionally add any "domain search" suffix as well for quicker connections, etc.

After you have properly reconfigured the internal MASQed machines, remember to restart their appropriate network services or reboot them if need be.

The following configuration instructions assume that you are using a Class C network with 192.168.0.1 as your Linux MASQ server's address. Please note that 192.168.0.0 and 192.168.0.255 are reserved TCP/IP address per RFC1918 for uses just like enabling IP Masquerade services.

As it stands, the following Platforms have been tested as internal MASQed machines. This is only an EXAMPLE of all compatible OSes out there:

mirror server hosted at Truenetwork, Russian Federation.