7.15. ( MTU ) - IP MASQ seems to be working fine but some sites don't work. This usually happens with WWW and some FTP sites.

Depending on what Linux kernel version you are running on the MASQ server, some will people disagree on the real problem. The two following arguments have valid points, are inter-related, and users from each camp continue to debate this to this day.

No worries though. A there are several perfectly good ways to fix this nasty MTU problem:

7.15.1. Enabling PMTU Clamping for PPPoE and some PPP Users:

For those users who use PPPoE clients for (DSL / Cablemodem) or PPP (Dialup), your Internet connection is NOT "eth0" (for example) but usually "ppp0". In addition to this, your Internet link's MTU or Maximum Transmission Unit (largest packet you can transmit over the Internet) isn't 1500 bytes but 1492. The 1492 byte MTU comes from the link size of Ethernet (1518 bytes) - Ethernet MAC overhead (18) = 1500. Then you subtract the PPPoE header (8 bytes) == MTU of 1492. This overhead isn't a big deal but sometimes ISPs or remote Internet sites do stupid things to break PPPoE or non-1500 byte MTU connected machines.

You can find more info about this topic on the web. Specifically, here is good presentaion on the topic: mss-talk presentation (PDF). Here is the entire Write up and other good info

To enable clamping in both the RP or PPPd PPPoE clients, add the following line to your /etc/ppp/pppoe.conf file:

  # - If you have a computer acting as a gateway for a LAN, choose "1412".
  #   The setting of 1412 is safe for either setup, but uses slightly more
  #   CPU power.
  #
  CLAMPMSS=1412
  

7.15.2. Clamping the MSS via IPTABLES:

As mentioned above for PPPoE users, some ISPs and WWW sites filter critical ICMP packets like MTU Path Discovery. Because of this, many users might find more Internet sites work but others hang or work poorly. Fortunately, recent IPTABLES have added PMTU Clamping support which should help you. If your using IPTABLES and think you're hitting this issue, try adding the following line to the end of your rc.firewall-iptables ruleset. It should be noted that there is no PMTU clamping support in IPCHAINS.

 iptables -I FORWARD -p tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu 
 

If this line causes an error when you re-run the rc.firewall-iptables* firewall rulesets, you might need to upgrade your version of IPTABLES which includes the "TCPMSS" IPTABLES module.

7.15.3. Changing the External MTU of the MASQ server:

This solution usually only applies to DIALUP users since PPPoE users cannot INCREASE their MTU because of PPPoE's header overhead.

To use this solution, first see what your current MTU for your Internet link is. To do so, run "/bin/ifconfig" on the MASQ server. Look at the lines that corresponds to your Internet connection and look for the MTU (for example, ppp0). This NEEDs to be set to 1500. Usually, Ethernet links will default to 1500 for Ethernet but serial / DIALUP modem PPP links might default to 576.

7.15.4. Changing the MTU of various operating systems:

If you reconfigure ALL of your MASQed PCs to use the SAME MTU as your external Internet link's MTU (for example, 1492 for PPPoE users), everything should work fine and this method is sometimes the MOST EFFECTIVE way of fixing things. This is including ALL of the solutions mentioned above. But doing things this way can be a lot of work if there are lots of internal MASQed machines or be even impossible to do if you don't have administrative access to all the internal MASQed machines.

Follow these simple steps for your respective operating system:

The follow examples utilize an MTU of 1492 for typical PPPoE connections for some DSL and Cablemodem users. It is recommended to use the HIGHEST values possible for all connections that are 128Kb/s and faster. It should be noted that some PPPoE ISPs might require an MTU setting of 1460 (not 1492) for proper connectivity due to additional overhead in the ISP's internal network.

The only real reason to use smaller MTUs than 1492 or 1460 is to lower your Internet link's latency but at the cost of throughput. Please see http://www.ecst.csuchico.edu/~dranch/PPP/ppp-performance.html#mtu for more details on this topic.

If you know how to make similar changes like these to other OSes like OS/2, MacOS, etc. please email David Ranch so it can be included in the HOWTO.

7.15.4.1. Changing the MTU on Linux:

------------------------------------------
1. The setting of MTU can vary from Linux distribution to distribution.  

   For Redhat: You need to edit the various "ifconfig" statements in 
               the /sbin/ifup script

   For Slackware: You need to edit the various "ifconfig" statements in 
                  the /etc/rc.d/rc1.inet

2. Here is one good, any-distribution-will-work example, edit the 
   /etc/rc.d/rc.local file and put the following at the END of the file: 

        echo "Changing the MTU of ETH0"
        /sbin/ifconfig eth0 mtu 1492

     Replace "eth0" with the interface name that is the machine's upstream 
     connection which is connected to the Internet.

3. For advanced options like "TCP Receive Windows" and such, detailed examples
   on how to edit the respective networking scripts for your specific Linux
   distro, etc., please see Chapter 16 of 
   http://www.ecst.csuchico.edu/~dranch/LINUX/index-linux.html#trinityos 
------------------------------------------

7.15.4.2. Changing the MTU on MS Windows 2000

------------------------------------------
1. Making ANY changes to the Registry is inheritantly risky but
   with a backup copy, you should be safe.  Proceed at your 
   OWN RISK.

2. Goto Start-->Run-->RegEdit

3. Registry-->Export Registry File-->Save a copy of your registry
   to a reliable place

4. Navigate down to the key:

   [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Inter
faces\<ID for Adapter>

   Each ID Adapter has default keys for DNS, TCP/IP address, Default Gateway, 
   subnet mask, etc. Find the key one that is for your network card.

5. Create the following Entry:

      type=DWORD
      name="MTU"				(Do NOT include the quotes)
      value=1492 (Decimal)      (Do NOT include the text "(Decimal)")

http://support.microsoft.com/support/kb/articles/Q120/6/42.asp?LN=EN-US&SD=gn&FR=0


 *** If you know how to also change the MSS, TCP Window Size, and the
 *** TTL parameters in NT 2000, please email dranch@trinnet.net as I 
 *** would love to add it to the HOWTO.

5. Reboot to let the changes take effect.
------------------------------------------

7.15.4.3. Changing the MTU on MS Windows NT 4.x

------------------------------------------
1. Making ANY changes to the Registry is inheritantly risky but
   with a backup copy, you should be safe.  Proceed at your 
   OWN RISK.

2. Goto Start-->Run-->RegEdit

3. Registry-->Export Registry File-->Save a copy of your registry
   to a reliable place

4. Create the following keys in the Registry trees, choose two
   possible Registry trees.  Multiple entries are for various 
   network devices like DialUp Networking (ppp), Ethernet NICs, 
   PPTP VPNs, etc.

   http://support.microsoft.com/support/kb/articles/Q102/9/73.asp?LN=EN-US&SD=gn&FR=0


   [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Parameters\Tcpip]
                     and
   [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\<Adapter-name>\Parameters\Tcpip]

      Replace "<Adapter-Name>" with the respective name of your uplink LAN NIC 
      interface

         type=DWORD
         name="MTU"              (Do NOT include the quotes)
         value=1492 (Decimal)    (Do NOT include the text "(Decimal>")

       (Do NOT include the quotes)


 *** If you know how to also change the MSS, TCP Window Size, and the
 *** TTL parameters in NT 4.x, please email dranch@trinnet.net as I 
 *** would love to add it to the HOWTO.

5. Reboot to make the changes take effect.
------------------------------------------

7.15.4.4. Changing the MTU on MS Windows 98:

------------------------------------------
1. Making ANY changes to the Registry is inheritantly risky but
   with a backup copy, you should be safe.  Proceed at your OWN RISK.

2. Goto Start-->Run-->RegEdit

3. You should make a backup copy of your Registry before doing anything.  To
   do this, copy the "user.dat" and "system.dat" files from the \WINDOWS 
   directory and put them into a safe place.  It should be noted that the
   previously mentioned method of using "Regedit: Registry-->Export Registry 
   File-->Save a copy of your registry" would only perform Registry MERGES 
   and NOT do a replacement.

4. Search though each of the Registry trees that end in "n" (e.g. 0007) 
   and have a Registry entry called "IPAddress" which has the IP address
   of your NIC.  Under that key, add the following:

   From http://support.microsoft.com/support/kb/articles/q158/4/74.asp

     [Hkey_Local_Machine\System\CurrentControlset\Services\Class\NetTrans\000n]
         type=STRING
         name="MaxMTU"            (Do NOT include the quotes)
         value=1492 (Decimal)     (Do NOT include the text "(Decimal)")


5. You can also change the "TCP Receive Window" which sometimes
   increases network performance SUBSTANTIALLY.  If you notice your
   throughput has DECREASED, put these items BACK to their original 
   settings and reboot.

     [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP]

        type=STRING
        name="DefaultRcvWindow"    (Do NOT include the quotes)
        value=32768 (Decimal)      (Do NOT include the text "(Decimal>")

        type=STRING
        name="DefaultTTL"          (Do NOT include the quotes)
        value=128 (Decimal)        (Do NOT include the text "(Decimal>")


6. Reboot to let the changes take effect.
------------------------------------------

7.15.4.5. Changing the MTU on MS Windows 95:

------------------------------------------
1. Making ANY changes to the Registry is inheritantly risky but
   with a backup copy, you should be safe.  Proceed at your OWN RISK.

2. Goto Start-->Run-->RegEdit

3. You should make a backup copy of your Registry before continuing.  To
   do this, copy the "user.dat" and "system.dat" files from the \WINDOWS 
   directory and put them into a safe place.  It should be noted that the
   previously mentioned method of using "Regedit: Registry-->Export Registry 
   File-->Save a copy of your registry" would only do Registry MERGES and NOT 
   do a replacement.

4. Search through each of the Registry trees that end in "n" (e.g. 0007) 
   and have a Registry entry called "IPAddress", which has the IP address
   of your NIC.  Under that key, add the following:

   From http://support.microsoft.com/support/kb/articles/q158/4/74.asp

     [Hkey_Local_Machine\System\CurrentControlset\Services\Class\NetTrans\000n]

         type=DWORD
         name="MaxMTU"           (Do NOT include the quotes)
         value=1492 (Decimal)    (Do NOT include the text "(Decimal)")

         type=DWORD
         name="MaxMSS"           (Do NOT include the quotes)
         value=1450 (Decimal)    (Do NOT include the text "(Decimal>")


5. You can also change the "TCP Receive Window" which sometimes
   increases network performance SUBSTANTIALLY.  If you notice your
   throughput has DECREASED, put these items BACK to their original 
   settings and reboot.

     [HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\MSTCP]
        type=DWORD
        name="DefaultRcvWindow"   (Do NOT include the quotes)
        value=32768 (Decimal)     (Do NOT include the text "(Decimal>")

        type=DWORD
        name="DefaultTTL"         (Do NOT include the quotes)
        value=128 (Decimal)       (Do NOT include the text "(Decimal>")


6. Reboot to let the changes take effect.
------------------------------------------

mirror server hosted at Truenetwork, Russian Federation.