Multicast programming... or writing your own multicast applications.
Several extensions to the programming API are needed in order to support
multicast. All of them are handled via two system calls: setsockopt()
(used to pass information to the kernel) and getsockopt() (to retrieve
information regarded multicast behavior). This does not mean that
2 new system calls were added to support multicast. The pair
setsockopt()/getsockopt() has been there for years. Since 4.2 BSD
at least. The addition consists on a new set of options (multicast options)
that are passed to these system calls, that the kernel must understand.
The following are the setsockopt()/getsockopt() function prototypes:
int getsockopt(int s, int level, int optname, void* optval, int* optlen);
int setsockopt(int s, int level, int optname, const void* optval, int optlen);
The first parameter, s, is the socket the system call applies to.
For multicasting, it must be a socket of the family AF_INET and its
type may be either SOCK_DGRAM or SOCK_RAW. The most common use
is with SOCK_DGRAM sockets, but if you plan to write a routing daemon or
modify some existing one, you will probably need to use SOCK_RAW ones.
The second one, level, identifies the layer that is to handle the
option, message or query, whatever you want to call it. So, SOL_SOCKET
is for the socket layer, IPPROTO_IP for the IP layer, etc...
For multicast programming, level will always be IPPROTO_IP.
optname identifies the option we are setting/getting. Its value
(either supplied by the program or returned by the kernel) is
optval. The optnames involved in multicast programming are the
following:
setsockopt() getsockopt()
IP_MULTICAST_LOOP yes yes
IP_MULTICAST_TTL yes yes
IP_MULTICAST_IF yes yes
IP_ADD_MEMBERSHIP yes no
IP_DROP_MEMBERSHIP yes no
optlen carries the size of the data structure optval points to.
Note that in getsockopt() it is a value-result rather than a value:
the kernel writes the value of optname in the buffer pointed by
optval and informs us of that value's size via optlen.
Both setsockopt() and getsockopt() return 0 on success and -1 on
error.
You have to decide, as the application writer, whether you want the data you send to be looped back to your host or not. If you plan to have more than one process or user "listening", loopback must be enabled. On the other hand, if you are sending the images your video camera is producing, you probably don't want loopback, even if you want to see yourself on the screen. In that latter case, your application will probably receive the images from a device attached to the computer and send them to the socket. As the application already "has" that data, it is improbable it wants to receive it again on the socket. Loopback is by default enabled.
Regard that optval is a pointer. You can't write:
setsockopt(socket, IPPROTO_IP, IP_MULTICAST_LOOP, 0, 1);
u_char loop;
setsockopt(socket, IPPROTO_IP, IP_MULTICAST_LOOP, &loop, sizeof(loop));
loop to 1 to enable loopback or 0 to disable it.
To know whether a socket is currently looping-back or not use something like:
u_char loop;
int size;
getsockopt(socket, IPPROTO_IP, IP_MULTICAST_LOOP, &loop, &size)
If not otherwise specified, multicast datagrams are sent with a default value of 1, to prevent them to be forwarded beyond the local network. To change the TTL to the value you desire (from 0 to 255), put that value into a variable (here I name it "ttl") and write somewhere in your program:
u_char ttl;
setsockopt(socket, IPPROTO_IP, IP_MULTICAST_TTL, &ttl, sizeof(ttl));
The behavior with getsockopt() is similar to the one seen on IP_MULTICAST_LOOP.
Usually, the system administrator specifies the default interface multicast datagrams should be sent from. The programmer can override this and choose a concrete outgoing interface for a given socket with this option.
struct in_addr interface_addr;
setsockopt (socket, IPPROTO_IP, IP_MULTICAST_IF, &interface_addr, sizeof(interface_addr));
>From now on, all multicast traffic generated in this socket will be output
from the interface chosen. To revert to the original behavior and let the
kernel choose the outgoing interface based on the system administrator's
configuration, it is enough to call setsockopt() with this same option
and INADDR_ANY in the interface field.
In determining or selecting outgoing interfaces, the following ioctls
might be useful: SIOCGIFADDR (to get an interface's address),
SIOCGIFCONF (to get the list of all the interfaces) and SIOCGIFFLAGS
(to get an interface's flags and, thus, determine whether the interface is
multicast capable or not -the IFF_MULTICAST flag-).
If the host has more than one interface and the IP_MULTICAST_IF option is not set, multicast transmissions are sent from the default interface, although the remainding interfaces might be used for multicast forwarding if the host is acting as a multicast router.
Recall that you need to tell the kernel which multicast groups you are interested
in. If no process is interested in a group, packets destined to it that arrive
to the host are discarded. In order to inform the kernel of your interests and,
thus, become a member of that group, you should first fill a ip_mreq
structure which is passed later to the kernel in the optval field of the
setsockopt() system call.
The ip_mreq structure (taken from /usr/include/linux/in.h) has the
following members:
struct ip_mreq
{
struct in_addr imr_multiaddr; /* IP multicast address of group */
struct in_addr imr_interface; /* local IP address of interface */
};
(Note: the "physical" definition of the structure is in the file above
specified. Nonetheless, you should not include <linux/in.h> if
you want your code to be portable. Instead, include <netinet/in.h>
which, in turn, includes <linux/in.h> itself).
The first member, imr_multiaddr, holds the group address you want to join.
Remember that memberships are also associated with interfaces, not
just groups. This is the reason you have to provide a value for the second
member: imr_interface. This way, if you are in a multihomed host, you can
join the same group in several interfaces. You can always fill this last
member with the wildcard address (INADDR_ANY) and then the kernel will deal
with the task of choosing the interface.
With this structure filled (say you defined it as: struct ip_mreq mreq;)
you just have to call setsockopt() this way:
setsockopt (socket, IPPROTO_IP, IP_ADD_MEMBERSHIP, &mreq, sizeof(mreq));
Notice that you can join several groups to the same socket, not just one. The
limit to this is IP_MAX_MEMBERSHIPS and, as of version 2.0.33, it has the value
of 20.
The process is quite similar to joining a group:
struct ip_mreq mreq;
setsockopt (socket, IPPROTO_IP, IP_DROP_MEMBERSHIP, &mreq, sizeof(mreq));
where mreq is the same structure with the same data used when joining the
group. If the imr_interface member is filled with INADDR_ANY, the
first matching group is dropped.
If you have joined a lot of groups to the same socket, you don't need to drop memberships in all of them in order to terminate. When you close a socket, all memberships associated with it are dropped by the kernel. The same occurs if the process that opened the socket is killed.
Finally, keep in mind that a process dropping membership for a group does
not imply that the host will stop receiving datagrams for that group. If
another socket joined that group in that same interface previously to this
IP_DROP_MEMBERSHIP, the host will keep being a member of that group.
Both ADD_MEMBERSHIP and DROP_MEMBERSHIP are nonblocking operations. They should return immediately indicating either success or failure.