Internet-Draft Groupings for HTTP Clients and Servers May 2022
Watsen Expires 25 November 2022 [Page]
Workgroup:
NETCONF Working Group
Internet-Draft:
draft-ietf-netconf-http-client-server-10
Published:
Intended Status:
Standards Track
Expires:
Author:
K. Watsen
Watsen Networks

YANG Groupings for HTTP Clients and HTTP Servers

Abstract

This document defines two YANG modules: the first defines a minimal grouping for configuring an HTTP client, and the second defines a minimal grouping for configuring an HTTP server. It is intended that these groupings will be used to help define the configuration for simple HTTP-based protocols (not for complete web servers or browsers).

Editorial Note (To be removed by RFC Editor)

This draft contains placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.

Artwork in this document contains shorthand references to drafts in progress. Please apply the following replacements (note: not all may be present):

Artwork in this document contains placeholder values for the date of publication of this draft. Please apply the following replacement:

The following Appendix section is to be removed prior to publication:

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 25 November 2022.

Table of Contents

1. Introduction

This document defines two YANG 1.1 [RFC7950] modules: the first defines a minimal grouping for configuring an HTTP client, and the second defines a minimal grouping for configuring an HTTP server. It is intended that these groupings will be used to help define the configuration for simple HTTP-based protocols (not for complete web servers or browsers).

1.1. Relation to other RFCs

This document presents one or more YANG modules [RFC7950] that are part of a collection of RFCs that work together to, ultimately, enable the configuration of the clients and servers of both the NETCONF [RFC6241] and RESTCONF [RFC8040] protocols.

The modules have been defined in a modular fashion to enable their use by other efforts, some of which are known to be in progress at the time of this writing, with many more expected to be defined in time.

The normative dependency relationship between the various RFCs in the collection is presented in the below diagram. The labels in the diagram represent the primary purpose provided by each RFC. Hyperlinks to each RFC are provided below the diagram.

                               crypto-types
                                 ^      ^
                                /        \
                               /          \
                      truststore         keystore
                       ^     ^             ^  ^
                       |     +---------+   |  |
                       |               |   |  |
                       |      +------------+  |
tcp-client-server      |     /         |      |
   ^    ^        ssh-client-server     |      |
   |    |           ^            tls-client-server
   |    |           |              ^     ^        http-client-server
   |    |           |              |     |                 ^
   |    |           |        +-----+     +---------+       |
   |    |           |        |                     |       |
   |    +-----------|--------|--------------+      |       |
   |                |        |              |      |       |
   +-----------+    |        |              |      |       |
               |    |        |              |      |       |
               |    |        |              |      |       |
            netconf-client-server       restconf-client-server

Table 1: Label to RFC Mapping
Label in Diagram Originating RFC
crypto-types [I-D.ietf-netconf-crypto-types]
truststore [I-D.ietf-netconf-trust-anchors]
keystore [I-D.ietf-netconf-keystore]
tcp-client-server [I-D.ietf-netconf-tcp-client-server]
ssh-client-server [I-D.ietf-netconf-ssh-client-server]
tls-client-server [I-D.ietf-netconf-tls-client-server]
http-client-server [I-D.ietf-netconf-http-client-server]
netconf-client-server [I-D.ietf-netconf-netconf-client-server]
restconf-client-server [I-D.ietf-netconf-restconf-client-server]

1.2. Specification Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

1.3. Adherence to the NMDA

This document is compliant with the Network Management Datastore Architecture (NMDA) [RFC8342]. For instance, as described in [I-D.ietf-netconf-trust-anchors] and [I-D.ietf-netconf-keystore], trust anchors and keys installed during manufacturing are expected to appear in <operational>.

1.4. Conventions

Various examples used in this document use a placeholder value for binary data that has been base64 encoded (e.g., "BASE64VALUE="). This placeholder value is used as real base64 encoded structures are often many lines long and hence distracting to the example being presented.

2. The "ietf-http-client" Module

This section defines a YANG 1.1 module called "ietf-http-client". A high-level overview of the module is provided in Section 2.1. Examples illustrating the module's use are provided in Examples (Section 2.2). The YANG module itself is defined in Section 2.3.

2.1. Data Model Overview

This section provides an overview of the "ietf-http-client" module in terms of its features and groupings.

2.1.1. Features

The following diagram lists all the "feature" statements defined in the "ietf-http-client" module:

Features:
  +-- proxy-connect
  +-- basic-auth
  +-- tcp-supported
  +-- tls-supported

2.1.2. Groupings

The "ietf-http-client" module defines the following "grouping" statements:

  • http-client-identity-grouping
  • http-client-grouping
  • http-client-stack-grouping

Each of these groupings are presented in the following subsections.

2.1.2.1. The "http-client-identity-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "http-client-identity-grouping" grouping:

  grouping http-client-identity-grouping:
    +-- client-identity!
       +-- (auth-type)
          +--:(basic)
             +-- basic {basic-auth}?
                +-- user-id                 string
                +---u ct:password-grouping

Comments:

  • This grouping exists because it is used three times by the "http-client-grouping" discussed in Section 2.1.2.2.
  • The "client-identity" node is a "presence" container so the mandatory descendant nodes do not imply that this node must be configured, as a client identity may be configured at protocol layers.
  • The "basic" authentication scheme is the only scheme defined by this module, albeit it must be enabled via the "basic-auth" feature (see Section 2.1.1).
  • Other authentication schemes MAY be augmented in as needed by the application.
2.1.2.2. The "http-client-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "http-client-grouping" grouping:

  grouping http-client-grouping:
    +---u http-client-identity-grouping
    +-- proxy-connect! {proxy-connect}?
       +-- (proxy-type)
          +--:(http)
          |  +-- http-proxy
          |     +-- tcp-client-parameters
          |     |  +---u tcpc:tcp-client-grouping
          |     +-- http-client-parameters
          |        +---u http-client-identity-grouping
          +--:(https)
             +-- https-proxy
                +-- tcp-client-parameters
                |  +---u tcpc:tcp-client-grouping
                +-- tls-client-parameters
                |  +---u tlsc:tls-client-grouping
                +-- http-client-parameters
                   +---u http-client-identity-grouping

Comments:

  • The "http-client-grouping" defines the configuration for just "HTTP" part of a protocol stack. It does not, for instance, define any configuration for the "TCP" or "TLS" protocol layers (for that, see Section 2.1.2.3).
  • Beyond configuring the client's identity, via the "http-client-identity-grouping" grouping discussed in Section 2.1.2.1, this grouping defines support for HTTP-proxies, albeit it must be enabled via a "feature" statement.
  • The "proxy-connect" node is a "presence" container so the mandatory descendant nodes do not imply that this node must be configured, assuming the server supports the "proxy-connect" feature.
  • For the referenced grouping statement(s):

2.1.2.3. The "http-client-stack-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "http-client-stack-grouping" grouping:

  grouping http-client-stack-grouping:
    +-- (transport)
       +--:(tcp) {tcp-supported}?
       |  +-- tcp
       |     +-- tcp-client-parameters
       |     |  +---u tcpc:tcp-client-grouping
       |     +-- http-client-parameters
       |        +---u http-client-grouping
       +--:(tls) {tls-supported}?
          +-- tls
             +-- tcp-client-parameters
             |  +---u tcpc:tcp-client-grouping
             +-- tls-client-parameters
             |  +---u tlsc:tls-client-grouping
             +-- http-client-parameters
                +---u http-client-grouping

Comments:

2.1.3. Protocol-accessible Nodes

The "ietf-http-client" module defines only "grouping" statements that are used by other modules to instantiate protocol-accessible nodes.

2.2. Example Usage

This section presents two examples showing the http-client-grouping populated with some data.

The following example illustrates an HTTP client connecting directly to an HTTP server.

<!-- The outermost element below doesn't exist in the data model. -->
<!--  It simulates if the "grouping" were a "container" instead.  -->

<http-client xmlns="urn:ietf:params:xml:ns:yang:ietf-http-client">
  <client-identity>
    <basic>
      <user-id>bob</user-id>
      <cleartext-password>secret</cleartext-password>
    </basic>
  </client-identity>
</http-client>

The following example illustrates the same client connecting through an HTTP proxy. This example is consistent with examples presented in Section 2.2 of [I-D.ietf-netconf-trust-anchors] and Section 2.2 of [I-D.ietf-netconf-keystore].

=============== NOTE: '\' line wrapping per RFC 8792 ================

<!-- The outermost element below doesn't exist in the data model. -->
<!--  It simulates if the "grouping" were a "container" instead.  -->

<http-client xmlns="urn:ietf:params:xml:ns:yang:ietf-http-client">
  <client-identity>
    <basic>
      <user-id>bob</user-id>
      <cleartext-password>secret</cleartext-password>
    </basic>
  </client-identity>
  <proxy-connect>
    <https-proxy>
      <tcp-client-parameters>
        <remote-address>corp-fw2.example.com</remote-address>
        <keepalives>
          <idle-time>15</idle-time>
          <max-probes>3</max-probes>
          <probe-interval>30</probe-interval>
        </keepalives>
      </tcp-client-parameters>
      <tls-client-parameters>
        <client-identity>
          <certificate>
            <keystore-reference>
              <asymmetric-key>rsa-asymmetric-key</asymmetric-key>
              <certificate>ex-rsa-cert</certificate>
            </keystore-reference>
          </certificate>
        </client-identity>
        <server-authentication>
          <ca-certs>
            <truststore-reference>trusted-server-ca-certs</truststor\
e-reference>
          </ca-certs>
          <ee-certs>
            <truststore-reference>trusted-server-ee-certs</truststor\
e-reference>
          </ee-certs>
        </server-authentication>
      </tls-client-parameters>
      <http-client-parameters>
        <client-identity>
          <basic>
            <user-id>local-app-1</user-id>
            <cleartext-password>secret</cleartext-password>
          </basic>
        </client-identity>
      </http-client-parameters>
    </https-proxy>
  </proxy-connect>
</http-client>

2.3. YANG Module

This YANG module has normative references to [RFC6991].

<CODE BEGINS> file "ietf-http-client@2022-05-24.yang"

module ietf-http-client {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-http-client";
  prefix httpc;

  import ietf-netconf-acm {
    prefix nacm;
    reference
      "RFC 8341: Network Configuration Access Control Model";
  }

  import ietf-crypto-types {
    prefix ct;
    reference
      "RFC AAAA: YANG Data Types and Groupings for Cryptography";
  }

  import ietf-tcp-client {
    prefix tcpc;
    reference
      "RFC DDDD: YANG Groupings for TCP Clients and TCP Servers";
  }

  import ietf-tls-client {
    prefix tlsc;
    reference
      "RFC FFFF: YANG Groupings for TLS Clients and TLS Servers";
  }

  organization
    "IETF NETCONF (Network Configuration) Working Group";

  contact
    "WG Web:   https://datatracker.ietf.org/wg/netconf
     WG List:  NETCONF WG list <mailto:netconf@ietf.org>
     Author:   Kent Watsen <mailto:kent+ietf@watsen.net>";

  description
    "This module defines reusable groupings for HTTP clients that
     can be used as a basis for specific HTTP client instances.

     Copyright (c) 2022 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Revised
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC GGGG
     (https://www.rfc-editor.org/info/rfcGGGG); see the RFC
     itself for full legal notices.

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision 2022-05-24 {
    description
      "Initial version";
    reference
      "RFC GGGG: YANG Groupings for HTTP Clients and HTTP Servers";
  }

  // Features

  feature proxy-connect {
    description
      "Proxy connection configuration is configurable for
       HTTP clients on the server implementing this feature.";
  }

  feature basic-auth {
    description
      "The 'basic-auth' feature indicates that the client
       may be configured to use the 'basic' HTTP authentication
       scheme.";
    reference
      "RFC 7617: The 'Basic' HTTP Authentication Scheme";
  }

  feature tcp-supported {
    description
      "Indicates that the server supports HTTP/TCP.";
  }

  feature tls-supported {
    description
      "Indicates that the server supports HTTP/TLS.";
  }

  // Groupings

  grouping http-client-identity-grouping {
    description
      "A grouping to provide HTTP credentials used by the
       client to authenticate itself to the HTTP server.";
    container client-identity {
      nacm:default-deny-write;
      presence
        "Indicates that a client identity has been configured.
         This statement is present so the mandatory descendant
         nodes do not imply that this node must be configured.";
      description
        "The identity the HTTP client should use when
         authenticating itself to the HTTP server.";
      choice auth-type {
        mandatory true;
        description
          "A choice amongst available authentication types.";
        case basic {
          container basic {
            if-feature "basic-auth";
            leaf user-id {
              type string;
              mandatory true;
              description
                "The user-id for the authenticating client.";
            }
            uses ct:password-grouping {
              description
                "The password for the authenticating client.";
            }
            description
              "The 'basic' HTTP scheme credentials.";
            reference
              "RFC 7617: The 'Basic' HTTP Authentication Scheme";
          }
        }
      }
    }
  } // grouping http-client-identity-grouping

  grouping http-client-grouping {
    description
      "A reusable grouping for configuring a HTTP client.

       This grouping is expected to be used in conjunction with
       other configurations providing, e.g., the hostname or IP
       address and port number the client initiates connections
       to.

       Note that this grouping uses fairly typical descendant
       node names such that a stack of 'uses' statements will
       have name conflicts.  It is intended that the consuming
       data model will resolve the issue (e.g., by wrapping
       the 'uses' statement in a container called
       'http-client-parameters').  This model purposely does
       not do this itself so as to provide maximum flexibility
       to consuming models.";

    uses http-client-identity-grouping;

    container proxy-connect {
      nacm:default-deny-write;
      if-feature "proxy-connect";
      presence
        "Indicates that a proxy server connections have been
         configured.  This statement is present so the mandatory
         descendant nodes do not imply that this node must be
         configured.";
      description
        "Configures the proxy server the HTTP-client is to
         connect thru.";
      choice proxy-type {
        mandatory true;
        description
          "Choice amongst proxy server types.";
        case http {
          container http-proxy {
            description
              "Container for HTTP Proxy (Web Proxy) server
               configuration parameters.";
            container tcp-client-parameters {
              description
                "A wrapper around the TCP parameters to avoid
                 name collisions.";
              uses tcpc:tcp-client-grouping;
            }
            container http-client-parameters {
              description
                "A wrapper around the HTTP parameters to avoid
                 name collisions.";
              uses http-client-identity-grouping;
            }
          }
        }
        case https {
          container https-proxy {
            description
              "Container for HTTPS Proxy (Secure Web Proxy) server
               configuration parameters.";
            container tcp-client-parameters {
              description
                "A wrapper around the TCP parameters to avoid
                 name collisions.";
              uses tcpc:tcp-client-grouping;
            }
            container tls-client-parameters {
              description
                "A wrapper around the TLS parameters to avoid
                 name collisions.";
              uses tlsc:tls-client-grouping;
            }
            container http-client-parameters {
              description
                "A wrapper around the HTTP parameters to avoid
                 name collisions.";
              uses http-client-identity-grouping;
            }
          }
        }
      }
    }
  } // grouping http-client-grouping

  grouping http-client-stack-grouping {
    description
      "A grouping that defines common HTTP-based protocol stacks.";
    choice transport {
      mandatory true;
      description
        "Choice amongst various transports type.  TCP, with and
         without TLS are defined here, with 'feature' statements
         so that they may be disabled.  Other transports MAY be
         augmented in as 'case' statements by future efforts.";
      case tcp {
        if-feature "tcp-supported";
        container tcp {
          description
            "Container for TCP-based HTTP protocols.";
          container tcp-client-parameters {
            description
              "A wrapper around the TCP parameters to avoid
               name collisions.";
            uses tcpc:tcp-client-grouping;
          }
          container http-client-parameters {
            description
              "A wrapper around the HTTP parameters to avoid
               name collisions.";
            uses http-client-grouping;
          }
        }
      }
      case tls {
        if-feature "tls-supported";
        container tls {
          description
            "Container for TLS-based HTTP protocols.";
          container tcp-client-parameters {
            description
              "A wrapper around the TCP parameters to avoid
               name collisions.";
            uses tcpc:tcp-client-grouping;
          }
          container tls-client-parameters {
            description
              "A wrapper around the TLS parameters to avoid
               name collisions.";
            uses tlsc:tls-client-grouping;
          }
          container http-client-parameters {
            description
              "A wrapper around the HTTP parameters to avoid
               name collisions.";
            uses http-client-grouping;
          }
        }
      }
    }
  } // http-client-stack-grouping

}

<CODE ENDS>

3. The "ietf-http-server" Module

This section defines a YANG 1.1 module called "ietf-http-server". A high-level overview of the module is provided in Section 3.1. Examples illustrating the module's use are provided in Examples (Section 3.2). The YANG module itself is defined in Section 3.3.

3.1. Data Model Overview

This section provides an overview of the "ietf-http-server" module in terms of its features and groupings.

3.1.1. Features

The following diagram lists all the "feature" statements defined in the "ietf-http-server" module:

Features:
  +-- client-auth-supported
  +-- local-users-supported
  +-- basic-auth
  +-- tcp-supported
  +-- tls-supported

3.1.2. Groupings

The "ietf-http-server" module defines the following "grouping" statements:

  • http-server-grouping
  • http-server-stack-grouping

Each of these groupings are presented in the following subsections.

3.1.2.1. The "http-server-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "http-server-grouping" grouping:

  grouping http-server-grouping:
    +-- server-name?             string
    +-- client-authentication! {client-auth-supported}?
       +-- users {local-users-supported}?
          +-- user* [user-id]
             +-- user-id?       string
             +-- (auth-type)
                +--:(basic)
                   +-- basic {basic-auth}?
                      +-- user-id?    string
                      +-- password?   ianach:crypt-hash

Comments:

  • The "http-server-grouping" defines the configuration for just "HTTP" part of a protocol stack. It does not, for instance, define any configuration for the "TCP" or "TLS" protocol layers (for that, see Section 3.1.2.2).
  • The "server-name" node defines the HTTP server's name, as presented to HTTP clients.
  • The "client-authentication" node, which must by enabled by a feature, defines a very simple user-database. Only the "basic" authentication scheme is supported, albeit it must be enabled by a "feature". Other authentication schemes MAY be augmented in.
3.1.2.2. The "http-server-stack-grouping" Grouping

The following tree diagram [RFC8340] illustrates the "http-server-stack-grouping" grouping:

  grouping http-server-stack-grouping:
    +-- (transport)
       +--:(tcp) {tcp-supported}?
       |  +-- tcp
       |     +-- tcp-server-parameters
       |     |  +---u tcps:tcp-server-grouping
       |     +-- http-server-parameters
       |        +---u http-server-grouping
       +--:(tls) {tls-supported}?
          +-- tls
             +-- tcp-server-parameters
             |  +---u tcps:tcp-server-grouping
             +-- tls-server-parameters
             |  +---u tlss:tls-server-grouping
             +-- http-server-parameters
                +---u http-server-grouping

Comments:

3.1.3. Protocol-accessible Nodes

The "ietf-http-server" module defines only "grouping" statements that are used by other modules to instantiate protocol-accessible nodes.

3.2. Example Usage

This section presents an example showing the http-server-grouping populated with some data.

<!-- The outermost element below doesn't exist in the data model. -->
<!--  It simulates if the "grouping" were a "container" instead.  -->

<http-server xmlns="urn:ietf:params:xml:ns:yang:ietf-http-server">
  <server-name>foo.example.com</server-name>
</http-server>

3.3. YANG Module

This YANG module has normative references to [RFC6991].

<CODE BEGINS> file "ietf-http-server@2022-05-24.yang"

module ietf-http-server {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-http-server";
  prefix https;

  import iana-crypt-hash {
    prefix ianach;
    reference
      "RFC 7317: A YANG Data Model for System Management";
  }

  import ietf-netconf-acm {
    prefix nacm;
    reference
      "RFC 8341: Network Configuration Access Control Model";
  }

  import ietf-tcp-server {
    prefix tcps;
    reference
      "RFC DDDD: YANG Groupings for TCP Clients and TCP Servers";
  }

  import ietf-tls-server {
    prefix tlss;
    reference
      "RFC FFFF: YANG Groupings for TLS Clients and TLS Servers";
  }

  organization
    "IETF NETCONF (Network Configuration) Working Group";

  contact
    "WG Web:   https://datatracker.ietf.org/wg/netconf
     WG List:  NETCONF WG list <mailto:netconf@ietf.org>
     Author:   Kent Watsen <mailto:kent+ietf@watsen.net>";

  description
    "This module defines reusable groupings for HTTP servers that
     can be used as a basis for specific HTTP server instances.

     Copyright (c) 2022 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Revised
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC GGGG
     (https://www.rfc-editor.org/info/rfcGGGG); see the RFC
     itself for full legal notices.

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision 2022-05-24 {
    description
      "Initial version";
    reference
      "RFC GGGG: YANG Groupings for HTTP Clients and HTTP Servers";
  }

  // Features

  feature client-auth-supported {
    description
      "Indicates that the configuration for how to authenticate
       clients can be configured herein.  HTTP-level client
       authentication may not be needed when client authentication
       is expected to occur only at another protocol layer.";
  }

  feature local-users-supported {
    description
      "Indicates that the configuration for users can be
       configured herein, as opposed to in an application
       specific location.";
  }

  feature basic-auth {
    description
      "The 'basic-auth' feature indicates that the server
       may be configured authenticate users using the 'basic'
       HTTP authentication scheme.";
    reference
      "RFC 7617: The 'Basic' HTTP Authentication Scheme";
  }

  feature tcp-supported {
    description
      "Indicates that the server supports HTTP/TCP.";
  }

  feature tls-supported {
    description
      "Indicates that the server supports HTTP/TLS.";
  }

  // Groupings

  grouping http-server-grouping {
    description
      "A reusable grouping for configuring an HTTP server.

       Note that this grouping uses fairly typical descendant
       node names such that a stack of 'uses' statements will
       have name conflicts.  It is intended that the consuming
       data model will resolve the issue (e.g., by wrapping
       the 'uses' statement in a container called
       'http-server-parameters').  This model purposely does
       not do this itself so as to provide maximum flexibility
       to consuming models.";

    leaf server-name {
      nacm:default-deny-write;
      type string;
      description
        "The value of the 'Server' header field.  If not set, then
         underlying software's default value is used.  Set to the
         empty string to disable.";
    }

    container client-authentication {
      if-feature "client-auth-supported";
      nacm:default-deny-write;
      presence
        "Indicates that HTTP based client authentication is
         configured.  This statement is present so the mandatory
         descendant nodes do not imply that this node must be
         configured.";
      description
        "Configures how the HTTP server can authenticate HTTP
         clients.  The HTTP server will request that the HTTP
         client send authentication when needed.";
      container users {
        if-feature "local-users-supported";
        description
          "A list of locally configured users.";
        list user {
          key "user-id";
          description
            "The list of local users configured on this device.";
          leaf user-id {
            type string;
            description
              "The user-id for the authenticating client.";
          }
          choice auth-type {
            mandatory true;
            description
              "The authentication type.";
            case basic {
              container basic {
                if-feature "basic-auth";
                leaf user-id {
                  type string;
                  description
                    "The user-id for the authenticating client.";
                }
                leaf password {
                  nacm:default-deny-write;
                  type ianach:crypt-hash;
                  description
                    "The password for the authenticating client.";
                }
                description
                  "The 'basic' HTTP scheme credentials.";
                reference
                  "RFC 7617:
                    The 'Basic' HTTP Authentication Scheme";
              }
            }
          }
        }
      }
    } // container client-authentication
  } // grouping http-server-grouping

  grouping http-server-stack-grouping {
    description
      "A grouping that defines common HTTP-based protocol stacks.";
    choice transport {
      mandatory true;
      description
        "Choice amongst various transports type.  TCP, with and
         without TLS are defined here, with 'feature' statements
         so that they may be disabled.  Other transports MAY be
         augmented in as 'case' statements by future efforts.";
      case tcp {
        if-feature "tcp-supported";
        container tcp {
          description
            "Container for TCP-based HTTP protocols.";
          container tcp-server-parameters {
            description
              "A wrapper around the TCP parameters to avoid
               name collisions.";
            uses tcps:tcp-server-grouping;
          }
          container http-server-parameters {
            description
              "A wrapper around the HTTP parameters to avoid
               name collisions.";
            uses http-server-grouping;
          }
        }
      }
      case tls {
        if-feature "tls-supported";
        container tls {
          description
            "Container for TLS-based HTTP protocols.";
          container tcp-server-parameters {
            description
              "A wrapper around the TCP parameters to avoid
               name collisions.";
            uses tcps:tcp-server-grouping;
          }
          container tls-server-parameters {
            description
              "A wrapper around the TLS parameters to avoid
               name collisions.";
            uses tlss:tls-server-grouping;
          }
          container http-server-parameters {
            description
              "A wrapper around the HTTP parameters to avoid
               name collisions.";
            uses http-server-grouping;
          }
        }
      }
    }
  } // http-server-stack-grouping

}

<CODE ENDS>

4. Security Considerations

4.1. The "ietf-http-client" YANG Module

The "ietf-http-client" YANG module defines "grouping" statements that are designed to be accessed via YANG based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols have mandatory-to-implement secure transport layers (e.g., SSH, TLS) with mutual authentication.

The NETCONF access control model (NACM) [RFC8341] provides the means to restrict access for particular users to a pre-configured subset of all available protocol operations and content.

Since the module in this document only define groupings, these considerations are primarily for the designers of other modules that use these groupings.

One readable data node defined in this YANG module may be considered sensitive or vulnerable in some network environments. This node is as follows:

None of the writable data nodes defined in this YANG module are considered sensitive or vulnerable in network environments. The NACM "default-deny-write" extension has not been set for any data nodes defined in this module.

This module does not define any RPCs, actions, or notifications, and thus the security consideration for such is not provided here.

4.2. The "ietf-http-server" YANG Module

The "ietf-http-server" YANG module defines "grouping" statements that are designed to be accessed via YANG based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols have mandatory-to-implement secure transport layers (e.g., SSH, TLS) with mutual authentication.

The NETCONF access control model (NACM) [RFC8341] provides the means to restrict access for particular users to a pre-configured subset of all available protocol operations and content.

Since the module in this document only define groupings, these considerations are primarily for the designers of other modules that use these groupings.

None of the readable data nodes defined in this YANG module are considered sensitive or vulnerable in network environments. The NACM "default-deny-all" extension has not been set for any data nodes defined in this module.

None of the writable data nodes defined in this YANG module are considered sensitive or vulnerable in network environments. The NACM "default-deny-write" extension has not been set for any data nodes defined in this module.

This module does not define any RPCs, actions, or notifications, and thus the security consideration for such is not provided here.

5. IANA Considerations

5.1. The "IETF XML" Registry

This document registers two URIs in the "ns" subregistry of the IETF XML Registry [RFC3688]. Following the format in [RFC3688], the following registrations are requested:

   URI: urn:ietf:params:xml:ns:yang:ietf-http-client
   Registrant Contact: The IESG
   XML: N/A, the requested URI is an XML namespace.

   URI: urn:ietf:params:xml:ns:yang:ietf-http-server
   Registrant Contact: The IESG
   XML: N/A, the requested URI is an XML namespace.

5.2. The "YANG Module Names" Registry

This document registers two YANG modules in the YANG Module Names registry [RFC6020]. Following the format in [RFC6020], the following registrations are requested:

   name:         ietf-http-client
   namespace:    urn:ietf:params:xml:ns:yang:ietf-http-client
   prefix:       httpc
   reference:    RFC GGGG

   name:         ietf-http-server
   namespace:    urn:ietf:params:xml:ns:yang:ietf-http-server
   prefix:       https
   reference:    RFC GGGG

6. References

6.1. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC6020]
Bjorklund, M., Ed., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, , <https://www.rfc-editor.org/info/rfc6020>.
[RFC6991]
Schoenwaelder, J., Ed., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, , <https://www.rfc-editor.org/info/rfc6991>.
[RFC7950]
Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, , <https://www.rfc-editor.org/info/rfc7950>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC8341]
Bierman, A. and M. Bjorklund, "Network Configuration Access Control Model", STD 91, RFC 8341, DOI 10.17487/RFC8341, , <https://www.rfc-editor.org/info/rfc8341>.

6.2. Informative References

[I-D.ietf-netconf-crypto-types]
Watsen, K., "YANG Data Types and Groupings for Cryptography", Work in Progress, Internet-Draft, draft-ietf-netconf-crypto-types-22, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-crypto-types-22>.
[I-D.ietf-netconf-http-client-server]
Watsen, K., "YANG Groupings for HTTP Clients and HTTP Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-http-client-server-09, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-http-client-server-09>.
[I-D.ietf-netconf-keystore]
Watsen, K., "A YANG Data Model for a Keystore", Work in Progress, Internet-Draft, draft-ietf-netconf-keystore-24, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-keystore-24>.
[I-D.ietf-netconf-netconf-client-server]
Watsen, K., "NETCONF Client and Server Models", Work in Progress, Internet-Draft, draft-ietf-netconf-netconf-client-server-25, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-netconf-client-server-25>.
[I-D.ietf-netconf-restconf-client-server]
Watsen, K., "RESTCONF Client and Server Models", Work in Progress, Internet-Draft, draft-ietf-netconf-restconf-client-server-25, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-restconf-client-server-25>.
[I-D.ietf-netconf-ssh-client-server]
Watsen, K., "YANG Groupings for SSH Clients and SSH Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-ssh-client-server-27, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-ssh-client-server-27>.
[I-D.ietf-netconf-tcp-client-server]
Watsen, K. and M. Scharf, "YANG Groupings for TCP Clients and TCP Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-tcp-client-server-12, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-tcp-client-server-12>.
[I-D.ietf-netconf-tls-client-server]
Watsen, K., "YANG Groupings for TLS Clients and TLS Servers", Work in Progress, Internet-Draft, draft-ietf-netconf-tls-client-server-27, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-tls-client-server-27>.
[I-D.ietf-netconf-trust-anchors]
Watsen, K., "A YANG Data Model for a Truststore", Work in Progress, Internet-Draft, draft-ietf-netconf-trust-anchors-17, , <https://datatracker.ietf.org/doc/html/draft-ietf-netconf-trust-anchors-17>.
[RFC3688]
Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, , <https://www.rfc-editor.org/info/rfc3688>.
[RFC6241]
Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., and A. Bierman, Ed., "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, , <https://www.rfc-editor.org/info/rfc6241>.
[RFC8040]
Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, , <https://www.rfc-editor.org/info/rfc8040>.
[RFC8340]
Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams", BCP 215, RFC 8340, DOI 10.17487/RFC8340, , <https://www.rfc-editor.org/info/rfc8340>.
[RFC8342]
Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K., and R. Wilton, "Network Management Datastore Architecture (NMDA)", RFC 8342, DOI 10.17487/RFC8342, , <https://www.rfc-editor.org/info/rfc8342>.

Appendix A. Change Log

This section is to be removed before publishing as an RFC.

A.1. 00 to 01

  • Modified Abstract and Intro to be more accurate wrt intended applicability.
  • In ietf-http-client, removed "protocol-version" and all auth schemes except "basic".
  • In ietf-http-client, factored out "client-identity-grouping" for proxy connections.
  • In ietf-http-server, removed "choice required-or-optional" and "choice local-or-external".
  • In ietf-http-server, moved the basic auth under a "choice auth-type" limited by new "feature basic-auth".

A.2. 01 to 02

  • Removed the unused "external-client-auth-supported" feature from ietf-http-server.

A.3. 02 to 03

  • Removed "protocol-versions" from ietf-http-server based on HTTP WG feedback.
  • Slightly restructured the "proxy-server" definition in ietf-http-client.
  • Added http-client example show proxy server use.
  • Added a "Note to Reviewers" note to first page.

A.4. 03 to 04

  • Added a parent "container" to "client-identity-grouping" so that it could be better used by the proxy model.
  • Added a "choice" to the proxy model enabling selection of proxy types.
  • Added 'http-client-stack-grouping' and 'http-server-stack-grouping' convenience groupings.
  • Expanded "Data Model Overview section(s) [remove "wall" of tree diagrams].
  • Updated the Security Considerations section.

A.5. 04 to 05

  • Fixed titles and a ref in the IANA Considerations section
  • Cleaned up examples (e.g., removed FIXMEs)
  • Fixed issues found by the SecDir review of the "keystore" draft.
  • Updated the "ietf-http-client" module to use the new "password-grouping" grouping from the "crypto-types" module.

A.6. 05 to 06

  • Removed note questioning if okay for app to augment-in a 'path' node when needed, discussed during the 108 session.
  • Addressed comments raised by YANG Doctor in the ct/ts/ks drafts.

A.7. 06 to 07

  • Added XML-comment above examples explaining the reason for the unusual top-most element's presence.
  • Renamed 'client-auth-config-supported' to 'client-auth-supported' consistent with other drafts.
  • Wrapped 'container basic' choice inside a 'case basic' per best practice.
  • Aligned modules with `pyang -f` formatting.
  • Fixed nits found by YANG Doctor reviews.

A.8. 07 to 08

  • Replaced "base64encodedvalue==" with "BASE64VALUE=" in examples.
  • Minor editorial nits

A.9. 08 to 09

  • Fixed up the 'WG Web' and 'WG List' lines in YANG module(s)
  • Fixed up copyright (i.e., s/Simplified/Revised/) in YANG module(s)

A.10. 09 to 10

  • NO UPDATE.

Acknowledgements

The authors would like to thank for following for lively discussions on list and in the halls (ordered by first name): Ben Schwartz, Mark Nottingham, Rob Wilton (contributor), and Willy Tarreau.

Author's Address

Kent Watsen
Watsen Networks

mirror server hosted at Truenetwork, Russian Federation.