Last updated on 2025-12-24 23:50:31 CET.
| Flavor | Version | Tinstall | Tcheck | Ttotal | Status | Flags |
|---|---|---|---|---|---|---|
| r-devel-linux-x86_64-debian-clang | 1.0-23 | 135.44 | 329.85 | 465.29 | ERROR | |
| r-devel-linux-x86_64-debian-gcc | 1.0-23 | 109.98 | 222.16 | 332.14 | ERROR | |
| r-devel-linux-x86_64-fedora-clang | 1.0-23 | 279.00 | 576.77 | 855.77 | WARN | |
| r-devel-linux-x86_64-fedora-gcc | 1.0-23 | 300.00 | 621.19 | 921.19 | WARN | |
| r-devel-windows-x86_64 | 1.0-23 | 184.00 | 831.00 | 1015.00 | OK | |
| r-patched-linux-x86_64 | 1.0-23 | 148.44 | 312.30 | 460.74 | OK | |
| r-release-linux-x86_64 | 1.0-23 | 148.86 | 353.11 | 501.97 | OK | |
| r-release-macos-arm64 | 1.0-23 | 30.00 | 72.00 | 102.00 | NOTE | |
| r-release-macos-x86_64 | 1.0-23 | 110.00 | 569.00 | 679.00 | NOTE | |
| r-release-windows-x86_64 | 1.0-23 | 201.00 | 841.00 | 1042.00 | OK | |
| r-oldrel-macos-arm64 | 1.0-23 | 29.00 | 77.00 | 106.00 | NOTE | |
| r-oldrel-macos-x86_64 | 1.0-23 | 114.00 | 675.00 | 789.00 | NOTE | |
| r-oldrel-windows-x86_64 | 1.0-23 | 222.00 | 1110.00 | 1332.00 | NOTE |
Version: 1.0-23
Check: whether package can be installed
Result: WARN
Found the following significant warnings:
Warning: src/Makevars: Unknown C++ standard ‘CXX’ was ignored
See ‘/home/hornik/tmp/R.check/r-devel-clang/Work/PKGS/sf.Rcheck/00install.out’ for details.
* used C++ compiler: ‘Debian clang version 21.1.7 (1)’
Flavor: r-devel-linux-x86_64-debian-clang
Version: 1.0-23
Check: compiled code
Result: NOTE
File ‘sf/libs/sf.so’:
Found non-API call to R: ‘ATTRIB’
Compiled code should not call non-API entry points in R.
See ‘Writing portable packages’ in the ‘Writing R Extensions’ manual,
and section ‘Moving into C API compliance’ for issues with the use of
non-API entry points.
Flavors: r-devel-linux-x86_64-debian-clang, r-devel-linux-x86_64-debian-gcc, r-devel-linux-x86_64-fedora-clang, r-devel-linux-x86_64-fedora-gcc
Version: 1.0-23
Check: re-building of vignette outputs
Result: ERROR
Error(s) in re-building vignettes:
...
--- re-building ‘sf1.Rmd’ using rmarkdown
--- finished re-building ‘sf1.Rmd’
--- re-building ‘sf2.Rmd’ using rmarkdown
--- finished re-building ‘sf2.Rmd’
--- re-building ‘sf3.Rmd’ using rmarkdown
--- finished re-building ‘sf3.Rmd’
--- re-building ‘sf4.Rmd’ using rmarkdown
--- finished re-building ‘sf4.Rmd’
--- re-building ‘sf5.Rmd’ using rmarkdown
Quitting from sf5.Rmd:204-207 [unnamed-chunk-22]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<error/rlang_error>
Error in `[.data.table`:
! attempt access index 4/4 in VECTOR_ELT
---
Backtrace:
▆
1. ├─base::withVisible(knit_print(x, ...))
2. ├─knitr::knit_print(x, ...)
3. └─tmap:::knit_print.tmap(x, ...)
4. └─tmap:::print.tmap(x, knit = TRUE, options = options, ...)
5. └─tmap:::step4_plot(...)
6. ├─...[]
7. └─data.table:::`[.data.table`(...)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Error: processing vignette 'sf5.Rmd' failed with diagnostics:
attempt access index 4/4 in VECTOR_ELT
--- failed re-building ‘sf5.Rmd’
--- re-building ‘sf6.Rmd’ using rmarkdown
--- finished re-building ‘sf6.Rmd’
--- re-building ‘sf7.Rmd’ using rmarkdown
Linking to liblwgeom 3.0.0beta1 r16016, GEOS 3.14.1, PROJ 9.7.1
Attaching package: 'lwgeom'
The following objects are masked from 'package:sf':
st_minimum_bounding_circle, st_perimeter
--- finished re-building ‘sf7.Rmd’
SUMMARY: processing the following file failed:
‘sf5.Rmd’
Error: Vignette re-building failed.
Execution halted
Flavors: r-devel-linux-x86_64-debian-clang, r-devel-linux-x86_64-debian-gcc
Version: 1.0-23
Check: whether package can be installed
Result: WARN
Found the following significant warnings:
Warning: src/Makevars: Unknown C++ standard ‘CXX’ was ignored
See ‘/home/hornik/tmp/R.check/r-devel-gcc/Work/PKGS/sf.Rcheck/00install.out’ for details.
* used C++ compiler: ‘g++-15 (Debian 15.2.0-11) 15.2.0’
Flavor: r-devel-linux-x86_64-debian-gcc
Version: 1.0-23
Check: whether package can be installed
Result: WARN
Found the following significant warnings:
Warning: src/Makevars: Unknown C++ standard ‘CXX’ was ignored
See ‘/data/gannet/ripley/R/packages/tests-clang/sf.Rcheck/00install.out’ for details.
* used C++ compiler: ‘clang version 21.1.8’
Flavor: r-devel-linux-x86_64-fedora-clang
Version: 1.0-23
Check: tests
Result: NOTE
Running ‘aggregate.R’
Comparing ‘aggregate.Rout’ to ‘aggregate.Rout.save’ ... OK
Running ‘cast.R’ [4s/14s]
Comparing ‘cast.Rout’ to ‘cast.Rout.save’ ... OK
Running ‘crs.R’
Comparing ‘crs.Rout’ to ‘crs.Rout.save’ ... OK
Running ‘dist.R’
Comparing ‘dist.Rout’ to ‘dist.Rout.save’ ... OK
Running ‘dplyr.R’ [7s/20s]
Comparing ‘dplyr.Rout’ to ‘dplyr.Rout.save’ ... OK
Running ‘empty.R’
Comparing ‘empty.Rout’ to ‘empty.Rout.save’ ... OK
Running ‘full.R’
Comparing ‘full.Rout’ to ‘full.Rout.save’ ... OK
Running ‘gdal_geom.R’
Comparing ‘gdal_geom.Rout’ to ‘gdal_geom.Rout.save’ ...244,248c244,248
< [1,] 1760242094 0.114
< [2,] 946426033 0.061
< [3,] 2202239126 0.143
< [4,] 1074338664 0.070
< [5,] 2352518951 0.153
---
> [1,] 1760230516 0.114
> [2,] 946417787 0.061
> [3,] 2202223078 0.143
> [4,] 1074332698 0.070
> [5,] 2352528086 0.153
Running ‘geos.R’ [55s/133s]
Comparing ‘geos.Rout’ to ‘geos.Rout.save’ ...13,22c13,22
< [1,] 0.00 0.00 25652.42 440561.04 299772.09 361529.39 419671.11
< [2,] 0.00 0.00 0.00 409428.55 268944.32 332589.77 388544.57
< [3,] 25652.42 0.00 0.00 367555.46 227017.50 290297.11 346667.96
< [4,] 440561.04 409428.55 367555.46 0.00 67226.88 45537.78 0.00
< [5,] 299772.09 268944.32 227017.50 67226.88 0.00 0.00 46527.48
< [6,] 361529.39 332589.77 290297.11 45537.78 0.00 0.00 30213.34
< [7,] 419671.11 388544.57 346667.96 0.00 46527.48 30213.34 0.00
< [8,] 384592.69 354294.05 312350.59 16130.19 11926.78 0.00 0.00
< [9,] 262354.14 231217.46 189310.29 140455.85 0.00 64606.20 119563.76
< [10,] 71139.12 41943.86 0.00 330751.41 190182.42 252372.08 309862.03
---
> [1,] 0.00 0.00 25651.99 440561.48 299772.34 361529.73 419671.66
> [2,] 0.00 0.00 0.00 409429.44 268945.05 332590.52 388545.58
> [3,] 25651.99 0.00 0.00 367556.52 227018.38 290298.04 346669.14
> [4,] 440561.48 409429.44 367556.52 0.00 67226.86 45537.62 0.00
> [5,] 299772.34 268945.05 227018.38 67226.86 0.00 0.00 46527.56
> [6,] 361529.73 332590.52 290298.04 45537.62 0.00 0.00 30213.17
> [7,] 419671.66 388545.58 346669.14 0.00 46527.56 30213.17 0.00
> [8,] 384593.29 354295.06 312351.76 16130.19 11926.86 0.00 0.00
> [9,] 262353.97 231217.73 189310.73 140455.97 0.00 64606.27 119564.00
> [10,] 71138.53 41943.71 0.00 330752.58 190183.42 252373.26 309863.33
24,33c24,33
< [1,] 384592.69 262354.14 71139.12
< [2,] 354294.05 231217.46 41943.86
< [3,] 312350.59 189310.29 0.00
< [4,] 16130.19 140455.85 330751.41
< [5,] 11926.78 0.00 190182.42
< [6,] 0.00 64606.20 252372.08
< [7,] 0.00 119563.76 309862.03
< [8,] 0.00 85533.06 275389.73
< [9,] 85533.06 0.00 152488.90
< [10,] 275389.73 152488.90 0.00
---
> [1,] 384593.29 262353.97 71138.53
> [2,] 354295.06 231217.73 41943.71
> [3,] 312351.76 189310.73 0.00
> [4,] 16130.19 140455.97 330752.58
> [5,] 11926.86 0.00 190183.42
> [6,] 0.00 64606.27 252373.26
> [7,] 0.00 119564.00 309863.33
> [8,] 0.00 85533.33 275391.07
> [9,] 85533.33 0.00 152489.45
> [10,] 275391.07 152489.45 0.00
Running ‘graticule.R’ [7s/19s]
Comparing ‘graticule.Rout’ to ‘graticule.Rout.save’ ... OK
Running ‘grid.R’ [3s/10s]
Comparing ‘grid.Rout’ to ‘grid.Rout.save’ ... OK
Running ‘maps.R’ [4s/11s]
Comparing ‘maps.Rout’ to ‘maps.Rout.save’ ... OK
Running ‘plot.R’ [15s/44s]
Comparing ‘plot.Rout’ to ‘plot.Rout.save’ ... OK
Running ‘read.R’ [9s/29s]
Comparing ‘read.Rout’ to ‘read.Rout.save’ ... OK
Running ‘roundtrip.R’ [4s/12s]
Comparing ‘roundtrip.Rout’ to ‘roundtrip.Rout.save’ ... OK
Running ‘s2.R’ [5s/12s]
Comparing ‘s2.Rout’ to ‘s2.Rout.save’ ... OK
Running ‘sample.R’
Comparing ‘sample.Rout’ to ‘sample.Rout.save’ ... OK
Running ‘sfc.R’ [27s/71s]
Comparing ‘sfc.Rout’ to ‘sfc.Rout.save’ ...610c610
< Bounding box: xmin: 406261.8 ymin: 48374.95 xmax: 3052888 ymax: 1044157
---
> Bounding box: xmin: 406265 ymin: 48359.7 xmax: 3052877 ymax: 1044143
625,629c625,629
< 1 10 1364 0 19 A 4 #fb80724d MULTIPOLYGON (((1270815 913...
< 2 10 542 3 12 A 4 #fb80724d MULTIPOLYGON (((1340555 959...
< 3 208 3616 6 260 A 5 #80b1d34d MULTIPOLYGON (((1570591 910...
< 4 123 830 2 145 A 10 #bc80bd4d MULTIPOLYGON (((2881208 948...
< 5 1066 1606 3 1197 A 8 #fccde54d MULTIPOLYGON (((2525701 911...
---
> 1 10 1364 0 19 A 4 #fb80724d MULTIPOLYGON (((1270813 913...
> 2 10 542 3 12 A 4 #fb80724d MULTIPOLYGON (((1340553 959...
> 3 208 3616 6 260 A 5 #80b1d34d MULTIPOLYGON (((1570586 910...
> 4 123 830 2 145 A 10 #bc80bd4d MULTIPOLYGON (((2881206 948...
> 5 1066 1606 3 1197 A 8 #fccde54d MULTIPOLYGON (((2525700 911...
631,634c631,634
< 7 115 350 2 139 A 10 #bc80bd4d MULTIPOLYGON (((2881208 948...
< 8 254 594 2 371 A 9 #d9d9d94d MULTIPOLYGON (((2717989 951...
< 9 748 1190 2 844 A 8 #fccde54d MULTIPOLYGON (((2203890 914...
< 10 160 2038 5 176 A 5 #80b1d34d MULTIPOLYGON (((1697623 911...
---
> 7 115 350 2 139 A 10 #bc80bd4d MULTIPOLYGON (((2881206 948...
> 8 254 594 2 371 A 9 #d9d9d94d MULTIPOLYGON (((2717988 951...
> 9 748 1190 2 844 A 8 #fccde54d MULTIPOLYGON (((2203888 914...
> 10 160 2038 5 176 A 5 #80b1d34d MULTIPOLYGON (((1697618 911...
717c717
< Bounding box: xmin: 1216510 ymin: 935867 xmax: 1428880 ymax: 1031510
---
> Bounding box: xmin: 1216510 ymin: 935852 xmax: 1428880 ymax: 1031490
720,724c720,724
< POINT (1264559 935867)
< POINT (1256623 949384)
< POINT (1222665 972639)
< POINT (1333530 968278)
< POINT (1310838 958645)
---
> POINT (1264558 935852)
> POINT (1256623 949369)
> POINT (1222665 972624)
> POINT (1333528 968263)
> POINT (1310837 958630)
734c734
< Bounding box: xmin: -81.6893 ymin: 36.2492 xmax: -80.914 ymax: 36.5726
---
> Bounding box: xmin: -81.6893 ymin: 36.2491 xmax: -80.914 ymax: 36.5726
Running ‘sfg.R’
Comparing ‘sfg.Rout’ to ‘sfg.Rout.save’ ... OK
Running ‘spatstat.R’ [8s/24s]
Comparing ‘spatstat.Rout’ to ‘spatstat.Rout.save’ ... OK
Running ‘stars.R’ [7s/28s]
Comparing ‘stars.Rout’ to ‘stars.Rout.save’ ... OK
Running ‘testthat.R’ [44s/112s]
Running ‘units.R’
Comparing ‘units.Rout’ to ‘units.Rout.save’ ... OK
Running ‘wkb.R’
Comparing ‘wkb.Rout’ to ‘wkb.Rout.save’ ... OK
Flavor: r-devel-linux-x86_64-fedora-clang
Version: 1.0-23
Check: whether package can be installed
Result: WARN
Found the following significant warnings:
Warning: src/Makevars: Unknown C++ standard ‘CXX’ was ignored
See ‘/data/gannet/ripley/R/packages/tests-devel/sf.Rcheck/00install.out’ for details.
* used C++ compiler: ‘g++ (GCC) 15.1.1 20250521 (Red Hat 15.1.1-2)’
Flavor: r-devel-linux-x86_64-fedora-gcc
Version: 1.0-23
Check: tests
Result: NOTE
Running ‘aggregate.R’
Comparing ‘aggregate.Rout’ to ‘aggregate.Rout.save’ ... OK
Running ‘cast.R’ [4s/15s]
Comparing ‘cast.Rout’ to ‘cast.Rout.save’ ... OK
Running ‘crs.R’
Comparing ‘crs.Rout’ to ‘crs.Rout.save’ ... OK
Running ‘dist.R’
Comparing ‘dist.Rout’ to ‘dist.Rout.save’ ... OK
Running ‘dplyr.R’ [8s/19s]
Comparing ‘dplyr.Rout’ to ‘dplyr.Rout.save’ ... OK
Running ‘empty.R’
Comparing ‘empty.Rout’ to ‘empty.Rout.save’ ... OK
Running ‘full.R’ [4s/12s]
Comparing ‘full.Rout’ to ‘full.Rout.save’ ... OK
Running ‘gdal_geom.R’ [4s/13s]
Comparing ‘gdal_geom.Rout’ to ‘gdal_geom.Rout.save’ ...244,248c244,248
< [1,] 1760242094 0.114
< [2,] 946426033 0.061
< [3,] 2202239126 0.143
< [4,] 1074338664 0.070
< [5,] 2352518951 0.153
---
> [1,] 1760230516 0.114
> [2,] 946417787 0.061
> [3,] 2202223078 0.143
> [4,] 1074332698 0.070
> [5,] 2352528086 0.153
Running ‘geos.R’ [54s/124s]
Comparing ‘geos.Rout’ to ‘geos.Rout.save’ ...13,22c13,22
< [1,] 0.00 0.00 25652.42 440561.04 299772.09 361529.39 419671.11
< [2,] 0.00 0.00 0.00 409428.55 268944.32 332589.77 388544.57
< [3,] 25652.42 0.00 0.00 367555.46 227017.50 290297.11 346667.96
< [4,] 440561.04 409428.55 367555.46 0.00 67226.88 45537.78 0.00
< [5,] 299772.09 268944.32 227017.50 67226.88 0.00 0.00 46527.48
< [6,] 361529.39 332589.77 290297.11 45537.78 0.00 0.00 30213.34
< [7,] 419671.11 388544.57 346667.96 0.00 46527.48 30213.34 0.00
< [8,] 384592.69 354294.05 312350.59 16130.19 11926.78 0.00 0.00
< [9,] 262354.14 231217.46 189310.29 140455.85 0.00 64606.20 119563.76
< [10,] 71139.12 41943.86 0.00 330751.41 190182.42 252372.08 309862.03
---
> [1,] 0.00 0.00 25651.99 440561.48 299772.34 361529.73 419671.66
> [2,] 0.00 0.00 0.00 409429.44 268945.05 332590.52 388545.58
> [3,] 25651.99 0.00 0.00 367556.52 227018.38 290298.04 346669.14
> [4,] 440561.48 409429.44 367556.52 0.00 67226.86 45537.62 0.00
> [5,] 299772.34 268945.05 227018.38 67226.86 0.00 0.00 46527.56
> [6,] 361529.73 332590.52 290298.04 45537.62 0.00 0.00 30213.17
> [7,] 419671.66 388545.58 346669.14 0.00 46527.56 30213.17 0.00
> [8,] 384593.29 354295.06 312351.76 16130.19 11926.86 0.00 0.00
> [9,] 262353.97 231217.73 189310.73 140455.97 0.00 64606.27 119564.00
> [10,] 71138.53 41943.71 0.00 330752.58 190183.42 252373.26 309863.33
24,33c24,33
< [1,] 384592.69 262354.14 71139.12
< [2,] 354294.05 231217.46 41943.86
< [3,] 312350.59 189310.29 0.00
< [4,] 16130.19 140455.85 330751.41
< [5,] 11926.78 0.00 190182.42
< [6,] 0.00 64606.20 252372.08
< [7,] 0.00 119563.76 309862.03
< [8,] 0.00 85533.06 275389.73
< [9,] 85533.06 0.00 152488.90
< [10,] 275389.73 152488.90 0.00
---
> [1,] 384593.29 262353.97 71138.53
> [2,] 354295.06 231217.73 41943.71
> [3,] 312351.76 189310.73 0.00
> [4,] 16130.19 140455.97 330752.58
> [5,] 11926.86 0.00 190183.42
> [6,] 0.00 64606.27 252373.26
> [7,] 0.00 119564.00 309863.33
> [8,] 0.00 85533.33 275391.07
> [9,] 85533.33 0.00 152489.45
> [10,] 275391.07 152489.45 0.00
Running ‘graticule.R’ [7s/18s]
Comparing ‘graticule.Rout’ to ‘graticule.Rout.save’ ... OK
Running ‘grid.R’ [4s/10s]
Comparing ‘grid.Rout’ to ‘grid.Rout.save’ ... OK
Running ‘maps.R’ [5s/10s]
Comparing ‘maps.Rout’ to ‘maps.Rout.save’ ... OK
Running ‘plot.R’ [15s/38s]
Comparing ‘plot.Rout’ to ‘plot.Rout.save’ ... OK
Running ‘read.R’ [6s/16s]
Comparing ‘read.Rout’ to ‘read.Rout.save’ ... OK
Running ‘roundtrip.R’ [5s/13s]
Comparing ‘roundtrip.Rout’ to ‘roundtrip.Rout.save’ ... OK
Running ‘s2.R’ [5s/14s]
Comparing ‘s2.Rout’ to ‘s2.Rout.save’ ... OK
Running ‘sample.R’
Comparing ‘sample.Rout’ to ‘sample.Rout.save’ ... OK
Running ‘sfc.R’ [28s/71s]
Comparing ‘sfc.Rout’ to ‘sfc.Rout.save’ ...610c610
< Bounding box: xmin: 406261.8 ymin: 48374.95 xmax: 3052888 ymax: 1044157
---
> Bounding box: xmin: 406265 ymin: 48359.7 xmax: 3052877 ymax: 1044143
625,629c625,629
< 1 10 1364 0 19 A 4 #fb80724d MULTIPOLYGON (((1270815 913...
< 2 10 542 3 12 A 4 #fb80724d MULTIPOLYGON (((1340555 959...
< 3 208 3616 6 260 A 5 #80b1d34d MULTIPOLYGON (((1570591 910...
< 4 123 830 2 145 A 10 #bc80bd4d MULTIPOLYGON (((2881208 948...
< 5 1066 1606 3 1197 A 8 #fccde54d MULTIPOLYGON (((2525701 911...
---
> 1 10 1364 0 19 A 4 #fb80724d MULTIPOLYGON (((1270813 913...
> 2 10 542 3 12 A 4 #fb80724d MULTIPOLYGON (((1340553 959...
> 3 208 3616 6 260 A 5 #80b1d34d MULTIPOLYGON (((1570586 910...
> 4 123 830 2 145 A 10 #bc80bd4d MULTIPOLYGON (((2881206 948...
> 5 1066 1606 3 1197 A 8 #fccde54d MULTIPOLYGON (((2525700 911...
631,634c631,634
< 7 115 350 2 139 A 10 #bc80bd4d MULTIPOLYGON (((2881208 948...
< 8 254 594 2 371 A 9 #d9d9d94d MULTIPOLYGON (((2717989 951...
< 9 748 1190 2 844 A 8 #fccde54d MULTIPOLYGON (((2203890 914...
< 10 160 2038 5 176 A 5 #80b1d34d MULTIPOLYGON (((1697623 911...
---
> 7 115 350 2 139 A 10 #bc80bd4d MULTIPOLYGON (((2881206 948...
> 8 254 594 2 371 A 9 #d9d9d94d MULTIPOLYGON (((2717988 951...
> 9 748 1190 2 844 A 8 #fccde54d MULTIPOLYGON (((2203888 914...
> 10 160 2038 5 176 A 5 #80b1d34d MULTIPOLYGON (((1697618 911...
717c717
< Bounding box: xmin: 1216510 ymin: 935867 xmax: 1428880 ymax: 1031510
---
> Bounding box: xmin: 1216510 ymin: 935852 xmax: 1428880 ymax: 1031490
720,724c720,724
< POINT (1264559 935867)
< POINT (1256623 949384)
< POINT (1222665 972639)
< POINT (1333530 968278)
< POINT (1310838 958645)
---
> POINT (1264558 935852)
> POINT (1256623 949369)
> POINT (1222665 972624)
> POINT (1333528 968263)
> POINT (1310837 958630)
734c734
< Bounding box: xmin: -81.6893 ymin: 36.2492 xmax: -80.914 ymax: 36.5726
---
> Bounding box: xmin: -81.6893 ymin: 36.2491 xmax: -80.914 ymax: 36.5726
Running ‘sfg.R’
Comparing ‘sfg.Rout’ to ‘sfg.Rout.save’ ... OK
Running ‘spatstat.R’ [9s/22s]
Comparing ‘spatstat.Rout’ to ‘spatstat.Rout.save’ ... OK
Running ‘stars.R’ [7s/16s]
Comparing ‘stars.Rout’ to ‘stars.Rout.save’ ...294c294,296
< "nodata_value": 0
---
> "nodata_value": 0,
> "structural_info": {
> "COMPRESSOR": "{ \"blocksize\": 0, \"clevel\": 5, \"cname\": \"lz4\", \"id\": \"blosc\", \"shuffle\": 1 }"
297c299,300
< }[1] "{\n \"type\": \"group\",\n \"driver\": \"Zarr\",\n \"name\": \"/\",\n \"arrays\": {\n \"ones\": {\n \"datatype\": \"Int32\",\n \"dimensions\": [\n {\n \"name\": \"dim0\",\n \"full_name\": \"dim0\",\n \"size\": 100\n },\n {\n \"name\": \"dim1\",\n \"full_name\": \"dim1\",\n \"size\": 100\n }\n ],\n \"dimension_size\": [\n 100,\n 100\n ],\n \"block_size\": [\n 50,\n 50\n ],\n \"nodata_value\": 0\n }\n }\n}"
---
> }
> }[1] "{\n \"type\": \"group\",\n \"driver\": \"Zarr\",\n \"name\": \"/\",\n \"arrays\": {\n \"ones\": {\n \"datatype\": \"Int32\",\n \"dimensions\": [\n {\n \"name\": \"dim0\",\n \"full_name\": \"dim0\",\n \"size\": 100\n },\n {\n \"name\": \"dim1\",\n \"full_name\": \"dim1\",\n \"size\": 100\n }\n ],\n \"dimension_size\": [\n 100,\n 100\n ],\n \"block_size\": [\n 50,\n 50\n ],\n \"nodata_value\": 0,\n \"structural_info\": {\n \"COMPRESSOR\": \"{ \\\"blocksize\\\": 0, \\\"clevel\\\": 5, \\\"cname\\\": \\\"lz4\\\", \\\"id\\\": \\\"blosc\\\", \\\"shuffle\\\": 1 }\"\n }\n }\n }\n}"
Running ‘testthat.R’ [41s/109s]
Running ‘units.R’
Comparing ‘units.Rout’ to ‘units.Rout.save’ ... OK
Running ‘wkb.R’
Comparing ‘wkb.Rout’ to ‘wkb.Rout.save’ ... OK
Flavor: r-devel-linux-x86_64-fedora-gcc
Version: 1.0-23
Check: tests
Result: NOTE
Running ‘aggregate.R’ [0s/0s]
Comparing ‘aggregate.Rout’ to ‘aggregate.Rout.save’ ... OK
Running ‘cast.R’ [1s/1s]
Comparing ‘cast.Rout’ to ‘cast.Rout.save’ ... OK
Running ‘crs.R’ [0s/0s]
Comparing ‘crs.Rout’ to ‘crs.Rout.save’ ... OK
Running ‘dist.R’ [0s/0s]
Comparing ‘dist.Rout’ to ‘dist.Rout.save’ ... OK
Running ‘dplyr.R’ [1s/1s]
Comparing ‘dplyr.Rout’ to ‘dplyr.Rout.save’ ... OK
Running ‘empty.R’ [0s/0s]
Comparing ‘empty.Rout’ to ‘empty.Rout.save’ ... OK
Running ‘full.R’ [0s/0s]
Comparing ‘full.Rout’ to ‘full.Rout.save’ ... OK
Running ‘gdal_geom.R’ [1s/1s]
Comparing ‘gdal_geom.Rout’ to ‘gdal_geom.Rout.save’ ... OK
Running ‘geos.R’ [6s/6s]
Comparing ‘geos.Rout’ to ‘geos.Rout.save’ ... OK
Running ‘graticule.R’ [1s/1s]
Comparing ‘graticule.Rout’ to ‘graticule.Rout.save’ ... OK
Running ‘grid.R’ [0s/0s]
Comparing ‘grid.Rout’ to ‘grid.Rout.save’ ... OK
Running ‘maps.R’ [1s/1s]
Comparing ‘maps.Rout’ to ‘maps.Rout.save’ ... OK
Running ‘plot.R’ [3s/3s]
Comparing ‘plot.Rout’ to ‘plot.Rout.save’ ... OK
Running ‘read.R’ [1s/1s]
Comparing ‘read.Rout’ to ‘read.Rout.save’ ...187,189c187,254
< Warning message:
< In library(package, lib.loc = lib.loc, character.only = TRUE, logical.return = TRUE, :
< there is no package called 'RSQLite'
---
> Simple feature collection with 155 features and 13 fields
> Geometry type: POINT
> Dimension: XY
> Bounding box: xmin: 178605 ymin: 329714 xmax: 181390 ymax: 333611
> CRS: NA
> First 3 features:
> ogc_fid cadmium copper lead zinc elev dist om ffreq soil lime
> 1 1 11.7 85 299 1022 7.909 0.00135803 13.6 1 1 1
> 2 2 8.6 81 277 1141 6.983 0.01222430 14.0 1 1 1
> 3 3 6.5 68 199 640 7.800 0.10302900 13.0 1 1 1
> landuse dist.m GEOMETRY
> 1 Ah 50 POINT (181072 333611)
> 2 Ah 30 POINT (181025 333558)
> 3 Ah 150 POINT (181165 333537)
> Simple feature collection with 100 features and 15 fields
> Geometry type: MULTIPOLYGON
> Dimension: XY
> Bounding box: xmin: -84.32385 ymin: 33.88199 xmax: -75.45698 ymax: 36.58965
> CRS: NA
> First 3 features:
> ogc_fid area perimeter cnty_ cnty_id name fips fipsno cress_id bir74
> 1 1 0.114 1.442 1825 1825 Ashe 37009 37009 5 1091
> 2 2 0.061 1.231 1827 1827 Alleghany 37005 37005 3 487
> 3 3 0.143 1.630 1828 1828 Surry 37171 37171 86 3188
> sid74 nwbir74 bir79 sid79 nwbir79 GEOMETRY
> 1 1 10 1364 0 19 MULTIPOLYGON (((-81.47276 3...
> 2 0 10 542 3 12 MULTIPOLYGON (((-81.23989 3...
> 3 5 208 3616 6 260 MULTIPOLYGON (((-80.45634 3...
> Integer64 values larger than 9.0072e+15 lost significance after conversion to double;
> use argument int64_as_string = TRUE to import them lossless, as character
> Simple feature collection with 1 feature and 2 fields
> Geometry type: POINT
> Dimension: XY
> Bounding box: xmin: 0 ymin: 1 xmax: 0 ymax: 1
> CRS: NA
> a bigint GEOMETRY
> 1 1 4.611686e+18 POINT (0 1)
> Simple feature collection with 1 feature and 2 fields
> Geometry type: POINT
> Dimension: XY
> Bounding box: xmin: 0 ymin: 1 xmax: 0 ymax: 1
> CRS: NA
> a bigint GEOMETRY
> 1 1 4611686018427387904 POINT (0 1)
> Simple feature collection with 10 features and 2 fields
> Geometry type: LINESTRING
> Dimension: XY
> Bounding box: xmin: 645003 ymin: 4822568 xmax: 748805.6 ymax: 4992001
> Projected CRS: WGS 84 / UTM zone 32N
> First 1 features:
> PK_UID Name Geometry
> 1 1 Unknown LINESTRING (668540.7 485826...
> Simple feature collection with 8101 features and 6 fields
> Geometry type: POINT
> Dimension: XY
> Bounding box: xmin: 319224 ymin: 3934674 xmax: 1308585 ymax: 5214373
> Projected CRS: WGS 84 / UTM zone 32N
> First 1 features:
> PK_UID Name Peoples LocalCounc County Region Geometry
> 1 1 Brozolo 435 1 0 0 POINT (427002.8 4996361)
> Simple feature collection with 10 features and 2 fields
> Geometry type: MULTIPOLYGON
> Dimension: XY
> Bounding box: xmin: 378359.8 ymin: 4198234 xmax: 1211486 ymax: 5036803
> Projected CRS: WGS 84 / UTM zone 32N
> First 1 features:
> PK_UID Name Geometry
> 1 1 VENETO MULTIPOLYGON (((752912.3 50...
Running ‘roundtrip.R’ [1s/1s]
Comparing ‘roundtrip.Rout’ to ‘roundtrip.Rout.save’ ... OK
Running ‘s2.R’ [1s/1s]
Comparing ‘s2.Rout’ to ‘s2.Rout.save’ ... OK
Running ‘sample.R’ [0s/0s]
Comparing ‘sample.Rout’ to ‘sample.Rout.save’ ... OK
Running ‘sfc.R’ [4s/4s]
Comparing ‘sfc.Rout’ to ‘sfc.Rout.save’ ... OK
Running ‘sfg.R’ [0s/0s]
Comparing ‘sfg.Rout’ to ‘sfg.Rout.save’ ... OK
Running ‘spatstat.R’ [1s/1s]
Comparing ‘spatstat.Rout’ to ‘spatstat.Rout.save’ ... OK
Running ‘stars.R’ [1s/1s]
Comparing ‘stars.Rout’ to ‘stars.Rout.save’ ...294c294,296
< "nodata_value": 0
---
> "nodata_value": 0,
> "structural_info": {
> "COMPRESSOR": "{ \"blocksize\": 0, \"clevel\": 5, \"cname\": \"lz4\", \"id\": \"blosc\", \"shuffle\": 1 }"
297c299,300
< }[1] "{\n \"type\": \"group\",\n \"driver\": \"Zarr\",\n \"name\": \"/\",\n \"arrays\": {\n \"ones\": {\n \"datatype\": \"Int32\",\n \"dimensions\": [\n {\n \"name\": \"dim0\",\n \"full_name\": \"dim0\",\n \"size\": 100\n },\n {\n \"name\": \"dim1\",\n \"full_name\": \"dim1\",\n \"size\": 100\n }\n ],\n \"dimension_size\": [\n 100,\n 100\n ],\n \"block_size\": [\n 50,\n 50\n ],\n \"nodata_value\": 0\n }\n }\n}"
---
> }
> }[1] "{\n \"type\": \"group\",\n \"driver\": \"Zarr\",\n \"name\": \"/\",\n \"arrays\": {\n \"ones\": {\n \"datatype\": \"Int32\",\n \"dimensions\": [\n {\n \"name\": \"dim0\",\n \"full_name\": \"dim0\",\n \"size\": 100\n },\n {\n \"name\": \"dim1\",\n \"full_name\": \"dim1\",\n \"size\": 100\n }\n ],\n \"dimension_size\": [\n 100,\n 100\n ],\n \"block_size\": [\n 50,\n 50\n ],\n \"nodata_value\": 0,\n \"structural_info\": {\n \"COMPRESSOR\": \"{ \\\"blocksize\\\": 0, \\\"clevel\\\": 5, \\\"cname\\\": \\\"lz4\\\", \\\"id\\\": \\\"blosc\\\", \\\"shuffle\\\": 1 }\"\n }\n }\n }\n}"
Running ‘testthat.R’ [5s/6s]
Running ‘units.R’ [0s/0s]
Comparing ‘units.Rout’ to ‘units.Rout.save’ ... OK
Running ‘wkb.R’ [0s/0s]
Comparing ‘wkb.Rout’ to ‘wkb.Rout.save’ ... OK
Flavor: r-release-macos-arm64
Version: 1.0-23
Check: tests
Result: NOTE
Running ‘aggregate.R’ [1s/2s]
Comparing ‘aggregate.Rout’ to ‘aggregate.Rout.save’ ... OK
Running ‘cast.R’ [2s/3s]
Comparing ‘cast.Rout’ to ‘cast.Rout.save’ ... OK
Running ‘crs.R’ [1s/1s]
Comparing ‘crs.Rout’ to ‘crs.Rout.save’ ... OK
Running ‘dist.R’ [1s/2s]
Comparing ‘dist.Rout’ to ‘dist.Rout.save’ ... OK
Running ‘dplyr.R’ [3s/5s]
Comparing ‘dplyr.Rout’ to ‘dplyr.Rout.save’ ... OK
Running ‘empty.R’ [1s/2s]
Comparing ‘empty.Rout’ to ‘empty.Rout.save’ ... OK
Running ‘full.R’ [1s/2s]
Comparing ‘full.Rout’ to ‘full.Rout.save’ ... OK
Running ‘gdal_geom.R’ [2s/3s]
Comparing ‘gdal_geom.Rout’ to ‘gdal_geom.Rout.save’ ... OK
Running ‘geos.R’ [21s/51s]
Comparing ‘geos.Rout’ to ‘geos.Rout.save’ ... OK
Running ‘graticule.R’ [3s/6s]
Comparing ‘graticule.Rout’ to ‘graticule.Rout.save’ ... OK
Running ‘grid.R’ [2s/3s]
Comparing ‘grid.Rout’ to ‘grid.Rout.save’ ... OK
Running ‘maps.R’ [2s/4s]
Comparing ‘maps.Rout’ to ‘maps.Rout.save’ ... OK
Running ‘plot.R’ [8s/15s]
Comparing ‘plot.Rout’ to ‘plot.Rout.save’ ... OK
Running ‘read.R’ [2s/4s]
Comparing ‘read.Rout’ to ‘read.Rout.save’ ... OK
Running ‘roundtrip.R’ [2s/3s]
Comparing ‘roundtrip.Rout’ to ‘roundtrip.Rout.save’ ... OK
Running ‘s2.R’ [2s/3s]
Comparing ‘s2.Rout’ to ‘s2.Rout.save’ ... OK
Running ‘sample.R’ [1s/2s]
Comparing ‘sample.Rout’ to ‘sample.Rout.save’ ... OK
Running ‘sfc.R’ [11s/26s]
Comparing ‘sfc.Rout’ to ‘sfc.Rout.save’ ... OK
Running ‘sfg.R’ [1s/1s]
Comparing ‘sfg.Rout’ to ‘sfg.Rout.save’ ... OK
Running ‘spatstat.R’ [3s/7s]
Comparing ‘spatstat.Rout’ to ‘spatstat.Rout.save’ ... OK
Running ‘stars.R’ [3s/8s]
Comparing ‘stars.Rout’ to ‘stars.Rout.save’ ...294c294,296
< "nodata_value": 0
---
> "nodata_value": 0,
> "structural_info": {
> "COMPRESSOR": "{ \"blocksize\": 0, \"clevel\": 5, \"cname\": \"lz4\", \"id\": \"blosc\", \"shuffle\": 1 }"
297c299,300
< }[1] "{\n \"type\": \"group\",\n \"driver\": \"Zarr\",\n \"name\": \"/\",\n \"arrays\": {\n \"ones\": {\n \"datatype\": \"Int32\",\n \"dimensions\": [\n {\n \"name\": \"dim0\",\n \"full_name\": \"dim0\",\n \"size\": 100\n },\n {\n \"name\": \"dim1\",\n \"full_name\": \"dim1\",\n \"size\": 100\n }\n ],\n \"dimension_size\": [\n 100,\n 100\n ],\n \"block_size\": [\n 50,\n 50\n ],\n \"nodata_value\": 0\n }\n }\n}"
---
> }
> }[1] "{\n \"type\": \"group\",\n \"driver\": \"Zarr\",\n \"name\": \"/\",\n \"arrays\": {\n \"ones\": {\n \"datatype\": \"Int32\",\n \"dimensions\": [\n {\n \"name\": \"dim0\",\n \"full_name\": \"dim0\",\n \"size\": 100\n },\n {\n \"name\": \"dim1\",\n \"full_name\": \"dim1\",\n \"size\": 100\n }\n ],\n \"dimension_size\": [\n 100,\n 100\n ],\n \"block_size\": [\n 50,\n 50\n ],\n \"nodata_value\": 0,\n \"structural_info\": {\n \"COMPRESSOR\": \"{ \\\"blocksize\\\": 0, \\\"clevel\\\": 5, \\\"cname\\\": \\\"lz4\\\", \\\"id\\\": \\\"blosc\\\", \\\"shuffle\\\": 1 }\"\n }\n }\n }\n}"
Running ‘testthat.R’ [15s/31s]
Running ‘units.R’ [1s/2s]
Comparing ‘units.Rout’ to ‘units.Rout.save’ ... OK
Running ‘wkb.R’ [1s/2s]
Comparing ‘wkb.Rout’ to ‘wkb.Rout.save’ ... OK
Flavor: r-release-macos-x86_64
Version: 1.0-23
Check: installed package size
Result: NOTE
installed size is 82.3Mb
sub-directories of 1Mb or more:
doc 12.6Mb
libs 65.0Mb
sqlite 1.5Mb
Flavors: r-oldrel-macos-arm64, r-oldrel-macos-x86_64, r-oldrel-windows-x86_64