auk development

This vignette describes the process of updating and extending auk. Three topics are covered: updating auk when a new eBird taxonomy is released, extending auk to include new filters, and CRAN submission.

Updating the eBird taxonomy

The species, and other taxa, available for entry into the eBird database is dependent on the eBird taxonomy. Every August, the eBird team updates this taxonomy to reflect name changes splits, merges, new species, or any other changes. Historical eBird records are then updated accordingly and subsequent EBD files reflect this updated taxonomy. The auk package stores a copy of this taxonomy as the data frame ebird_taxonomy, and uses it both for filtering by species (auk_species()) and for taxonomic roll-up (auk_rollup()). Therefore, auk must be updated when a new eBird taxonomy is released. This section described how this is done. It is best to do this after the new taxonomy and the new EBD have both been released, otherwise the taxonomy and EBD will be out of sync.

When the eBird taxonomy is updated, the new version can be downloaded from the eBird website. The taxonomy can be downloaded in csv or Excel format, be sure to download the Excel file because the csv file has character encoding issues. Copy this file to data-raw/. At this point, you should check that this new taxonomy has the same format as the previous file, which will also be in this directory. Ensure that the same columns are present and that they’re named the same.

The file data-raw/ebird-taxonomy.r prepares the taxonomy as a data frame to be stored in the package. Open this file and edit the read_xlsx() call to point to the new file you just downloaded. Run the code, then open the ebird_taxonomy data frame to inspect it and make sure there’s no glaring issues. One potential error that should be investigated is non-ASCII characters. Some common names have accented characters (e.g. Rüppell’s Griffon, Gyps rueppelli), which can cause problems. ebird-taxonomy.r converts these characters to their unaccented equivalents (e.g. Ruppell’s Griffon). Check that this record, or others with accented characters, has been properly converted.

Next, update auk_version_date() (R/auk-version-date.r) to reflect the date of the new taxonomy and the new EBD.

Finally, build the package (devtools::build()) and run R CMD check (devtools::check()). If everything looks good, commit to git and push to GitHub.

Adding new filters

The primary functionality of auk is to apply filters to the EBD to extract a subset of records that can be imported into R and further analyzed. Individual filters are defined by a particular function (e.g. auk_date() or auk_country()) and correspond to subsetting on a particular column (e.g. “OBSERVATION DATE” and “COUNTRY CODE”, respectively). Defining a new filter is a fairly complicated process, involving carefully updating many components of the package, and should only be attempted by experienced R programmers. To add a filter called color, the following steps are required:

  1. Update auk_ebd() (in file R/auk-ebd.r) to define the column number for the new filter, create a placeholder in the auk_ebd object to store the filtering criteria, and update the auk_ebd print method for the new filter.
  2. Create a new function auk_color() (in file R/auk-color.r) that defines the new filter. As a starting point, use one of the other filtering functions. For example to filter on a range of numeric values, start with auk_duration(), to filter on a logical (true/false) variable use auk_complete(), or to filter on a discrete, categorical variable use auk_country(). Be sure to apply extensive checking on the validity of inputs and update the documentation, including examples.
  3. Update auk_filter() (in file R/auk-filter.r) to incorporate the filtering criteria into the AWK script. Again, use an existing filter as a template.
  4. Create unit tests for the new filter by creating a new test_that() block in tests/testthat/test_filters.r. Again, use an existing filter as a template.
  5. Update README.md and vignettes/auk.Rmd to add the new filter to the list of potential filters.
  6. Build, test, check, and push to GitHub

1. Update auk_ebd()

Near the top of the code for auk_ebd(), a data frame named filter_cols is defined which specifies which columns have associated filters. Add a new row to this data frame and set name as the name of the column in the file header that will be filtered on and id as the name of the filter. For example, if you’re creating a filter called auk_color() that filters on the column “FEATHER COLOR”, then set id = "color" and name = "feather color". Ideally, similar filters should be grouped together in this data frame, so insert the new row accordingly.

For filters that don’t apply to the sampling event data file, i.e. filters at the species level rather than the checklist level, add the id to the character vector not_in_sampling. For example, modify the code to read: not_in_sampling <- c("species", "breeding", "color").

Next, at the end of the code for auk_ebd(), the auk_ebd object is created and returned with the statement beginning with structure(.... This object should have placeholders for every filter. So, add a new element to the list, naming the variable after the id in the above data frame, putting it in the same order as in the above data frame, and choosing a sensible data type. For example, if color is a categorical variable, add a new list element color = character(), and if it’s a numeric variable, add color = numeric().

Finally, within auk-ebd.r a print.auk_ebd() method is defined, which you’ll need to update to print the filter in a sensible way. Here you’re best to find another filter with a similar format and use that as a template. Again, be sure to put the print code for the filter in the right order. For example, for a categorical filter allow multiple potential values, you may way something like:

# color filter
cat("  Feather color: ")
if (length(x$filters$color) == 0) {
  cat("all")
} else {
  cat(paste(x$filters$color, collapse = ", "))
}
cat("\n")

2. Create filter function

Create a new function that will allow users to define a filter. Be sure to following the naming conventions used, for our color example, the function should be named auk_color() and it should be in a file called auk-color.r. It’s easiest to use an existing function as a template here. In general, the function should take two argument, the auk_ebd object to modify, and an argument with the filter criteria, e.g. auk_color(x, color). Note how the name of the function matches the name of the second argument. The function should be edited to include the following:

  1. Extensive checks on the incoming arguments. Remember that filtering with AWK takes multiple hours, so it’s best to catch any errors early, prior to running auk_filter(). At the very least, check data types and, where possible, check that values are valid (e.g. color should be in c("red", "green", "blue", ...)). Provide informative error or warning messages where appropriate.
  2. Setting the filter criteria in the auk_ebd object. This is generally as simple as x$filters$color = color.
  3. Thorough documentation. Document all the arguments and provide examples with and without the pipe operator (%>%).

3. Update auk_filter()

The actual work of filtering is done by auk_filter(), which generates an AWK script, then calls AWK. This function must be updated to parse the filters defined using the function you created in step 2 into AWK code. In the code for auk_filter(), there are two calls to the internal function awk_translate(), which is an internal function defined in the same file. It’s awk_translate() that you’ll need to edit. This function has a series of code blocks each of which prepares the AWK code for a different filter. Find an existing filter that is similar to the new one you’re creating and copy it over to the correct spot (remember to preserve the ordering of the filters). For the auk_color() example, the code chunk would look like:

  # color filter
  if (length(filters$color) == 0) {
    filter_strings$color <- ""
  } else {
    idx <- col_idx$index[col_idx$id == "color"]
    condition <- paste0("$", idx, " == \"", filters$color, "\"",
                        collapse = " || ")
    filter_strings$color <- str_interp(awk_if, list(condition = condition))
  }

When given a sampling event data file in addition to a EBD file, auk_filter() will filter both files. By default auk_filter() will apply all filters to both files, however, some filters (e.g. species) are only appropriate for the EBD. To address this, prior to calling auk_translate() for the sampling data, reset the species-specific filters. In the case of color, which is a species specific variable, modify the code as follows:

s_filters <- x$filters
s_filters$species <- character()
## ADD THIS LINE
s_filters$color <- character()
##
awk_script_sampling <- awk_translate(filters = s_filters,
                                     col_idx = x$col_idx_sampling,
                                     sep = sep,
                                     select = select_cols)

Finally, at the end of the auk-filter.r file, there’s a string named awk_filter, which defines the template for the AWK script. Each filter has a line in this string (e.g. ${species}) where the AWK code will be inserted. You’ll need to add a line in this file for your new filter: ${color}.

4. Unit tests

Now that you’ve successfully created the filter, play around with it a bit to make sure it works as expected. Once you feel the filter is working, it’s time to formalize this testing process by defining unit tests. Open the file tests/testthat/test_filters.r and you’ll notice a series of calls like test_that("auk_species", ..., each of which contains tests for a specific filter.

Using an existing test block as an example, define a new block (again, put it in the correct order relative to the other filters). Consult the Testing chapter of Hadley Wickham’s R packages book for details on defining good unit tests. At the very least, define tests to make sure that typical use works as expected, that errors are caught when input is invalid, and that edge cases are correctly handled.

5. Update vignette and README

Both the vignette (vignettes/auk.Rmd) and README (README.Rmd) have sections giving a short description of each filter. Add the new filter you’ve created here.

6. Build, test, check, and push to GitHub

Carry out the following final steps:

  1. Run devtools::document() to generate package documentation
  2. Run devtools::build() to build and install the package
  3. Run devtools::check() to run the units tests and variety of other checks via R CMD check
  4. Build the vignettes with devtools::build_vignettes()
  5. Build the package website with pkgdown::build_site()
  6. Commit to git, then push to GitHub

CRAN submission

Minor updates to auk can be pushed to GitHub giving users the option of installing the development version from there. However, at least once a year, when a new eBird taxonomy is released, a new version of auk should be released on CRAN. For full details on this process, consult Hadley Wickham’s R Packages book, however, I’ll provide a quick guide here. Once The package has been updated following the instructions from the above sections:

  1. Check the package. Run devtools::check() to run R CMD check locally. Check that a Windows binary can be built by running devtools::build_win(). The results will be emailed to you within about 30 minutes. Also, this package uses continuous integration to automatically check the package on Linux, Mac, and Windows whenever it’s pushed to GitHub. Check the badges at the top of the GitHub repo to ensure the builds are passing. Any NOTEs, ERRORs, or WARNINGs returned by R CMD check must be fixed before submission to CRAN.
  2. Increment the version number in the DESCRIPTION file.
  3. Update NEWS.md to note any new features or changes.
  4. Build the package with devtools::build(), the vignettes with devtools::build_vignettes(), and the website with pkgdown::build_site().
  5. Commit to git and push to GitHub.
  6. Submit to CRAN with devtools::release()

At this point, you’ll need to wait for binaries of your package to build, which could take a couple days. It’s possible that problems will arise during this process and your package will be rejected, in which case, you’ll need to fix any problems and resubmit.

Once the package is on CRAN, create a new release on GitHub and tag it with the version number.

mirror server hosted at Truenetwork, Russian Federation.