Linear regression models

Example setup

A lightweight SQLite database will be used for this article. Additionally, a sample data set is created.

# Open a database connection
con <- DBI::dbConnect(RSQLite::SQLite(), path = ":memory:")
RSQLite::initExtension(con)

library(dplyr)
# Copy data to the database
db_flights <- copy_to(con, nycflights13::flights, "flights")
# Create a simple sample
db_sample <- db_flights %>%
  filter(!is.na(arr_time)) %>%
  head(20000)

Model inside the database

The linear_regression_db() function does not use a formula. It uses a table, and a named dependent variable. This means data preparation is needed prior to running the model. The best way to prepare the data for modeling will be using piped dplyr operations.

db_sample %>%
  select(arr_delay, dep_delay, distance) %>%
  linear_regression_db(arr_delay)
#> # A tibble: 1 × 3
#>   `(Intercept)` dep_delay distance
#>           <dbl>     <dbl>    <dbl>
#> 1        -0.659      1.00 -0.00337

Categorical variables

Adding a categorical a variable to a model requires prior data transformation The add_dummy_variables() appends a set of boolean variables, one for each discrete value. This function creates one-less discrete variable than the possible values. For example: if the categorical variable has three possible values, the function will append two variables. By default, add_dummy_variables() removes the original variable.

The reason for this approach is to reduce the number of database operations. Without this step, then a fitting function would have to request all of the unique values every time a new model run, which creates unnecessary processing.

db_sample %>%
  select(arr_delay, origin) %>%
  add_dummy_variables(origin, values = c("EWR", "JFK", "LGA"))
#> # Source:   SQL [?? x 3]
#> # Database: sqlite 3.41.2 []
#>    arr_delay origin_JFK origin_LGA
#>        <dbl>      <dbl>      <dbl>
#>  1        11          0          0
#>  2        20          0          1
#>  3        33          1          0
#>  4       -18          1          0
#>  5       -25          0          1
#>  6        12          0          0
#>  7        19          0          0
#>  8       -14          0          1
#>  9        -8          1          0
#> 10         8          0          1
#> # ℹ more rows

In a real world scenario, the possible values are usually not known at the beginning of the analysis. So it is a good idea to load them into a vector variable so that it can be used any time that variable is added to a model. This can be easily done using the pull() command from dplyr:

origins <- db_flights %>%
  group_by(origin) %>%
  summarise() %>%
  pull()

origins
#> [1] "EWR" "JFK" "LGA"

The add_dummy_variables() can be used as part of the piped code that terminates in the modeling function.

db_sample %>%
  select(arr_delay, origin) %>%
  add_dummy_variables(origin, values = origins) %>%
  linear_regression_db(arr_delay)
#> # A tibble: 1 × 3
#>   `(Intercept)` origin_JFK origin_LGA
#>           <dbl>      <dbl>      <dbl>
#> 1          9.62      -10.6      -7.79

Multiple linear regression

One of two arguments is needed to be set when fitting a model with three or more independent variables. The both relate to the size of the data set used for the model. So either the sample_size argument is passed, or auto_count is set to TRUE. When auto_count is set to TRUE, and no sample size is passed, then the function will do a table count as part of the model fitting. This is done in order to prevent unnecessary database operations, especially for cases when multiple models will be tested on top of the same sample data.

db_sample %>%
  select(arr_delay, arr_time, dep_delay, dep_time) %>%
  linear_regression_db(arr_delay, sample_size = 20000)
#> # A tibble: 1 × 4
#>   `(Intercept)`  arr_time dep_delay dep_time
#>           <dbl>     <dbl>     <dbl>    <dbl>
#> 1         -1.72 -0.000208      1.01 -0.00155

Interactions

Interactions have to be handled manually prior the modeling step.

db_sample %>%
  mutate(distanceXarr_time = distance * arr_time) %>%
  select(arr_delay, distanceXarr_time) %>%
  linear_regression_db(arr_delay, sample_size = 20000)
#> # A tibble: 1 × 2
#>   `(Intercept)` distanceXarr_time
#>           <dbl>             <dbl>
#> 1          6.77       -0.00000197

A more typical model would also include the two original variables:

db_sample %>%
  mutate(distanceXarr_time = distance * arr_time) %>%
  select(arr_delay, distance, arr_time, distanceXarr_time) %>%
  linear_regression_db(arr_delay, sample_size = 20000)
#> # A tibble: 1 × 4
#>   `(Intercept)` distance arr_time distanceXarr_time
#>           <dbl>    <dbl>    <dbl>             <dbl>
#> 1         -2.11  0.00269  0.00650       -0.00000435

Full example

Fitting a model with regular, categorical and interaction variables will look like this:

remote_model <- db_sample %>%
  mutate(distanceXarr_time = distance * arr_time) %>%
  select(arr_delay, dep_time, distanceXarr_time, origin) %>%
  add_dummy_variables(origin, values = origins) %>%
  linear_regression_db(y_var = arr_delay, sample_size = 20000)

remote_model
#> # A tibble: 1 × 5
#>   `(Intercept)` dep_time distanceXarr_time origin_JFK origin_LGA
#>           <dbl>    <dbl>             <dbl>      <dbl>      <dbl>
#> 1         -3.92   0.0132       -0.00000275      -10.1      -8.05