pigauto: Phylogenetic Imputation via Graph AUTO-encoders

Missing trait data should not stop a comparative analysis.

pigauto helps fill missing values in species trait data. Give it a trait table and a phylogenetic tree, and it uses related species, other traits, and optional environmental data to estimate the gaps. It works with common continuous and categorical trait types, and provides prediction intervals where available.

The workflow

Trait data + phylogenetic tree
              ↓
          impute()
              ↓
Completed trait data + prediction intervals

Installation

# CRAN release
install.packages("pigauto")

# Development version
pak::pak("itchyshin/pigauto")

# First-time torch setup (required once)
torch::install_torch()

Quick start

library(pigauto)
library(ape)

data(avonet300, tree300)
df <- avonet300
rownames(df) <- df$Species_Key
df$Species_Key <- NULL

# ── Step 1: point imputation ──────────────────────────────────────────────
# avonet300 is fully observed, so there is nothing to impute as-is.
# Demonstrate the workflow by hiding 30 Mass values:
set.seed(1L)
hide <- sample(which(!is.na(df$Mass)), 30L)
df_obs <- df
df_obs$Mass[hide] <- NA

result <- impute(df_obs, tree300)

# `completed` keeps observed values and fills the NAs:
result$completed$Mass[hide]                          # pigauto's imputations
df$Mass[hide]                                        # held-out truth, for comparison

# `imputed_mask` flags which cells were filled:
sum(result$imputed_mask[, "Mass"])                   # 30

# Conformal 95% intervals are stored on the prediction object:
result$prediction$conformal_lower[hide, "Mass"]
result$prediction$conformal_upper[hide, "Mass"]

# `result$prediction$imputed$Mass` contains predictions for ALL species
# (observed + missing) -- intended for diagnostics, not as the imputed
# output.  See `?impute` ("What gets imputed (read this first)") for the
# distinction, and for the `n_imputations = 20, pool_method = "mode"`
# recommendation on imbalanced ordinal traits like Migration.

Using environmental covariates

When trait variation has a strong environmental component, supplying covariates can improve imputation. The same covariates may also serve as predictors in the downstream model:

data(ctmax_sim, tree300)
traits <- ctmax_sim[, c("species", "CTmax")]
covs   <- ctmax_sim["acclim_temp"]

result <- impute(traits, tree300, species_col = "species",
                 covariates = covs)

Covariates must be fully observed. Numeric columns are z-scored; factor/ordered columns are one-hot encoded automatically. The calibrated gate can close when the phylogenetic baseline already explains the validation cells, so covariates should be treated as an evidence-backed addition rather than an automatic improvement.

Phylogenetic tree uncertainty

multi_impute_trees() remains an experimental prediction-sensitivity tool. Its stochastic completions are not intended for downstream inference.

Trait types

Automatic type detection

pigauto infers each trait’s type from its R class — no trait_types argument needed for most data:

Two types require explicit override (indistinguishable from R class):

result <- impute(df, tree,
                 trait_types = c(Survival  = "proportion",
                                 Parasites = "zi_count"))

Compositional (multi-proportion) data — K columns per row summing to 1 (e.g. plumage-colour proportions, diet composition, microbiome relative abundances). Declare the group separately because these columns belong to ONE trait, not K independent ones:

# df has columns black, blue, red, ..., yellow (12 colours that sum to 1)
result <- impute(df, tree,
                 multi_proportion_groups = list(
                   colour = c("black", "blue", "red", "rufous",
                              "white", "yellow", ...)))

# imputed compositions sum to 1 per row:
result$prediction$probabilities$colour   # n_species x K matrix

Encoding is centred log-ratio (CLR) + per-component z-score; baseline is Brownian motion on CLR space; decode is softmax back to the simplex.

Full type reference

Trait vs covariate. A trait is something you want to impute (NAs allowed). A covariate is something that helps imputation (must be fully observed). The same variable can be either depending on your question: IUCN status unknown for Data Deficient species → put it in traits as an ordered factor; IUCN status fully known → pass as a covariate.

Architecture

pigauto blends two predictors per trait:

pred = (1 - r_cal) × baseline + r_cal × GNN_delta

The baseline is Brownian-motion conditional imputation for continuous/count/ordinal/proportion traits, and phylogenetic label propagation for binary/categorical traits. The GNN is an attention-based graph neural network trained on the phylogenetic topology, cross-trait correlations, and any user covariates. r_cal is a per-trait gate calibrated on a held-out validation split: when the baseline is already optimal on the validation cells, the gate can close to zero so the GNN contributes nothing. This is a validation-calibrated safety mechanism, not a universal performance guarantee.

Benchmarks

Current benchmark pages live under the pkgdown Methodology menu and should be read as versioned evidence: each page states its data-generating regime, sample size, missingness, seed, and comparison set. We keep headline numbers out of this README because both pigauto and the reference implementations are still under active development, and the numbers move with each release.

Caveats from multi-seed evidence

Three findings worth knowing before running pigauto on AVONET-scale data:

1. Continuous-trait results have non-trivial cross-seed variance — multi-seed evidence on AVONET n=1500 (3 seeds at N_IMP=20, see useful/MEMO_2026-05-01_multiseed_n20_and_default_flip.md) shows lift bands of ±10 % to ±20 % around the mean for traits like Tarsus.Length and Beak.Length_Culmen. We recommend multi_impute(m = 20, ...) and reporting mean ± SD across ≥ 3 seeds for any quantitative claim. Single-seed RMSE numbers should not be interpreted as point estimates of expected performance.

2. Mass on AVONET is currently unstable. At N_IMP=20 the BM joint baseline emits singular-Σ warnings on Mass, and one of three seeds produces a tail outlier with RMSE ≈ 11× the column-mean baseline (others beat it). Cause is under investigation; expected to be a back-transform tail issue. If you are imputing Mass, run multiple seeds and inspect the distribution of imputed values for outliers.

3. Migration (3-level ordinal) has needed special care in the AVONET multi-seed checks. The current baseline includes per-trait ordinal path selection with an LP-via-OVR candidate for low-K ordinal traits, but re-run the multi-seed evidence before treating this regime as resolved for a quantitative claim.

The gate protects against regression

For high-signal discrete traits the calibrated gate closes completely (correct behaviour — phylogenetic label propagation is already optimal). The GNN contributes meaningfully for OU-misspecified continuous traits, zero-inflated counts at high zero-fraction, and low-signal traits when strong covariates are supplied.

Multiple observations per species

data(ctmax_sim, tree300)
traits <- ctmax_sim[, c("species", "CTmax")]
covs   <- data.frame(acclim_temp = ctmax_sim$acclim_temp)

result <- impute(traits, tree300, species_col = "species",
                 covariates = covs)

Each observation gets a covariate-conditional prediction: the GNN aggregates to species level for phylogenetic message passing, then re-injects covariate values at observation level so predictions within a species differ by covariate context.

Documentation

• Live site: https://itchyshin.github.io/pigauto/
• Getting started: vignettes/getting-started.Rmd (rendered)
• Mixed types: mixed-types.html
• Posterior-tree prediction sensitivity: tree-uncertainty.html
• Common pitfalls: common-pitfalls.html

Acknowledgements

Russell Dinnage (@rdinnager) contributed to graph-scaling work and foundation-model/TabPFN exploration. Bhavya Jain (@b1805) contributed correctness fixes, safeguards and tests, and a large attention ablation. They are acknowledged as package contributors; Shinichi Nakagawa is the package author and maintainer for this release.

Citation

Nakagawa S (2026). pigauto: Phylogenetic Imputation via Graph Autoencoder. R package version 0.10.0.

mirror server hosted at Truenetwork, Russian Federation.