Apportionment scenarios

Flavio Poletti

2024-02-22

1) Introduction

This vignette explores the implementation of different seat apportionment scenarios. There are generally two ways to assign seats of a parliament: Either you distribute seats within each district independently or you distribute seats according to the vote share for the whole election region (e.g. on a national level). We will focus on the difference in seat shares compared to vote shares these two approaches can produce.


2) Setup data

We’ll mainly use the data set for the 2019 Finnish parliamentary elections. The finland2019 data set contains two data.frames: One with the number of votes for each party, the other data.frame tells us how many seats (election_mandates) each district has.

library(proporz)
str(finland2019)
#> List of 2
#>  $ votes_df         :'data.frame':   229 obs. of  3 variables:
#>   ..$ party_name   : chr [1:229] "KOK" "SDP" "VIHR" "PS" ...
#>   ..$ district_name: chr [1:229] "UUS" "UUS" "HEL" "UUS" ...
#>   ..$ votes        : int [1:229] 114243 97107 90662 86691 84141 78486 73626 66109 59722 55244 ...
#>  $ district_seats_df:'data.frame':   12 obs. of  2 variables:
#>   ..$ district_name: chr [1:12] "HEL" "HÄM" "KAA" "KES" ...
#>   ..$ seats        : int [1:12] 22 14 17 10 7 18 19 8 15 36 ...

To make comparisons easier, we’ll use matrices instead of data.frames. We create a votes_matrix from the given data.frame.

votes_matrix = pivot_to_matrix(finland2019$votes_df)
dim(votes_matrix)
#> [1] 44 12

# Let's look at all parties with at least 10k votes
knitr::kable(votes_matrix[rowSums(votes_matrix) > 10000,])
HEL HÄM KAA KES LAP OUL PIR SAT SKA UUS VAA VAR
KD 7253 11733 10875 8774 1077 5728 17180 3361 17389 14912 16741 5121
KESK 11015 20892 40715 30597 29145 78486 26536 20878 50459 35348 50053 29796
KOK 84141 39511 44224 19707 11243 28382 55244 17666 27699 114243 29530 52367
NYT 13529 0 0 0 0 1593 0 0 0 0 0 0
Nyt 0 0 0 0 0 0 0 0 0 24778 0 0
PIR 5840 996 687 1239 280 1244 2018 253 686 4083 462 1244
PS 47276 43199 46196 27851 17160 52771 51819 30090 39996 86691 42843 52913
RKP 20348 500 0 0 112 432 327 178 0 49625 52880 15238
SDP 52393 49359 59722 29201 13479 26588 66109 31475 38274 97107 33608 49156
SIN 2056 821 3212 705 483 1801 3342 0 4128 9498 2470 1427
STL 1285 1028 829 389 667 847 1371 199 769 2754 777 451
VAS 42899 15172 10371 12681 14128 33820 24341 12435 15908 26257 8315 35481
VIHR 90662 17354 23032 17639 9706 20376 37152 7461 21362 73626 10515 25309

We also create a named vector that defines how many seats each district has (district_seats). Note that the order of district names in district_seats and columns in votes_matrix differ. However, this does not affect the analysis as we access districts by name (as does biproporz() by the way).

district_seats = finland2019$district_seats_df$seats
names(district_seats) <- finland2019$district_seats_df$district_name
district_seats
#> HEL HÄM KAA KES LAP OUL PIR SAT SKA UUS VAA VAR 
#>  22  14  17  10   7  18  19   8  15  36  16  17


3) Distribute seats in every district independently

3.1) Function to distribute seats in districts

In Finland and many other jurisdictions, seats are assigned for each district independently. There is no biproportional apportionment among all districts. The following function, apply_proporz, calculates the seat distribution for each district and returns the number of seats per party and district as a matrix. The user can specify the apportionment method and a quorum threshold.

apply_proporz = function(votes_matrix, district_seats, method, quorum = 0) {
    seats_matrix = votes_matrix
    seats_matrix[] <- NA
    
    # calculate proportional apportionment for each district (matrix column)
    for(district in names(district_seats)) {
        seats_matrix[,district] <- proporz(votes_matrix[,district],
                                           district_seats[district],
                                           quorum = quorum,
                                           method = method)
    }
    return(seats_matrix)
}

3.2) Actual distribution method (D’Hondt)

The Finnish election system uses the D’Hondt method. We’ll calculate the seat distribution as a baseline to compare it with other methods.

bydistrict_v0 = apply_proporz(votes_matrix, district_seats, "d'hondt")

bydistrict_v0[rowSums(bydistrict_v0) > 0,]
#>           district_name
#> party_name HEL HÄM KAA KES LAP OUL PIR SAT SKA UUS VAA VAR
#>       KD     0   1   0   0   0   0   1   0   1   1   1   0
#>       KESK   0   1   3   3   3   6   2   1   4   2   4   2
#>       KOK    6   3   3   1   1   2   4   1   2   9   2   4
#>       Nyt    0   0   0   0   0   0   0   0   0   1   0   0
#>       PS     3   3   4   2   1   4   4   2   3   6   3   4
#>       RKP    1   0   0   0   0   0   0   0   0   3   4   1
#>       SDP    3   4   5   2   1   2   5   3   3   7   2   3
#>       VAS    3   1   0   1   1   3   1   1   1   2   0   2
#>       VIHR   6   1   2   1   0   1   2   0   1   5   0   1

3.3) Alternative methods

We’ll now look at alternative apportionment methods. The Sainte-Laguë method (standard rounding) for example is impartial to party size. On the other hand, the Huntington–Hill method favors small parties. Generally, Huntington-Hill is used with a quorum, otherwise all parties with more than zero votes get at least one seat. In this example, the quorum is 3% of votes in a district.

bydistrict_v1 = apply_proporz(votes_matrix, district_seats,
                                      method = "sainte-lague")

bydistrict_v2 = apply_proporz(votes_matrix, district_seats,
                                      method = "huntington-hill", 
                                      quorum = 0.03)

Let’s compare the seat distributions for these three methods. We get the number of party seats on the national level with rowSums.

df_bydistrict = data.frame(
    D.Hondt = rowSums(bydistrict_v0),
    Sainte.Lague = rowSums(bydistrict_v1),
    Huntington.Hill = rowSums(bydistrict_v2)
)

# sort table by D'Hondt seats
df_bydistrict <- df_bydistrict[order(df_bydistrict[[1]], decreasing = TRUE),] 

# print parties with at least one seat
knitr::kable(df_bydistrict[rowSums(df_bydistrict) > 0,])
D.Hondt Sainte.Lague Huntington.Hill
SDP 40 36 36
PS 39 37 37
KOK 38 35 35
KESK 31 29 29
VIHR 20 25 27
VAS 16 18 18
RKP 9 8 8
KD 5 7 6
Nyt 1 2 2
NYT 0 1 1
SIN 0 1 0

The actual political analysis is better left for people familiar with the party system. However, it is fair to say that the election system within districts has a significant impact on the number of seats in parliament. For example, the party with the most seats changes with Sainte-Laguë or Huntington-Hill.

3.4) Compare seat share with vote share

Let’s now compare the vote shares on the national level with the seat share in parliament. Since every entry in votes_matrix is only one voter, we can simply use the row sums to get the vote shares. Otherwise, we’d have to weigh votes in each district according to the number of seats. Since disproportionality analysis is not the focus of this package, we’ll simply look at the difference in shares for the actual distribution method.

vote_shares = rowSums(votes_matrix)/sum(votes_matrix)

shares = data.frame(
    seats = rowSums(bydistrict_v0)/sum(district_seats),
    votes = vote_shares 
)
shares$difference <- shares$seats-shares$votes
shares <- round(shares, 4)

# Only look at parties with at least 0.5 % of votes
shares <- shares[shares$votes > 0.005,]
shares <- shares[order(shares$difference),]

shares
#>       seats  votes difference
#> VIHR 0.1005 0.1154    -0.0149
#> KD   0.0251 0.0391    -0.0140
#> SIN  0.0000 0.0098    -0.0098
#> PIR  0.0000 0.0062    -0.0062
#> Nyt  0.0050 0.0081    -0.0030
#> VAS  0.0804 0.0821    -0.0017
#> RKP  0.0452 0.0455    -0.0003
#> KESK 0.1558 0.1381     0.0176
#> KOK  0.1910 0.1707     0.0202
#> PS   0.1960 0.1756     0.0204
#> SDP  0.2010 0.1781     0.0229

The difference between seat and vote share varies among parties from -1.5 to +2.3 percentage points.


4) Biproportional method

4.1) Biproportional party seats

We’ll now look at biproportional apportionment and whether it better matches the seat share with the national vote share. Keep in mind that simply using existing data sets with biproporz is not really suitable from a modeling perspective. Vote distributions are likely to be different if, for example, people know their vote also counts on a national level or if smaller parties choose to run in more districts.

With that being said, let’s assume our data set is properly modeled already. We need to consider that voters in Finland can only vote for one person in each district. They can’t distribute as many votes as there are seats in their district among candidates/parties. Thus we need to use use_list_votes=FALSE as a parameter in biproporz.

seats_biproportional = biproporz(votes_matrix, 
                                 district_seats, 
                                 use_list_votes = FALSE)

# show only parties with seats
seats_biproportional[rowSums(seats_biproportional) > 0,]
HEL HÄM KAA KES LAP OUL PIR SAT SKA UUS VAA VAR
KD 0 1 1 1 0 1 1 0 1 1 1 0
KESK 1 1 3 2 2 6 2 1 3 2 3 2
KOK 5 3 3 1 1 2 4 1 2 7 2 4
KP 0 0 0 0 0 0 1 0 0 0 0 0
NYT 1 0 0 0 0 0 0 0 0 0 0 0
Nyt 0 0 0 0 0 0 0 0 0 2 0 0
PIR 1 0 0 0 0 0 0 0 0 0 0 0
PS 3 3 3 2 1 4 3 2 3 5 3 3
RKP 1 0 0 0 0 0 0 0 0 4 3 1
SDP 3 4 4 2 1 2 4 2 3 6 2 3
SIN 0 0 0 0 0 0 0 0 1 1 0 0
STL 0 0 0 0 0 0 0 0 0 1 0 0
VAS 2 1 1 1 1 2 2 1 1 2 1 2
VIHR 5 1 2 1 1 1 2 1 1 5 1 2

Let’s now look at the difference between vote and seat share.

vote_shares = rowSums(votes_matrix)/sum(votes_matrix)
seat_shares = rowSums(seats_biproportional)/sum(seats_biproportional)

range(vote_shares - seat_shares)
#> [1] -0.005144852  0.002429257

As we can see, the difference between vote and seat share ranges from -0.5 to +0.2 percentage point. Biproportional apportionment matches the national vote share better than apportionment by district. This is expected however, since biproportional apportionment actually considers the national vote share. Discussing the pros and cons of a regional representation compared to a priority on national vote shares is not within the scope of this vignette. The following chunk shows the seat changes.

seat_changes = seats_biproportional-bydistrict_v0

knitr::kable(seat_changes[rowSums(abs(seat_changes)) > 0,colSums(abs(seat_changes))>0])
HEL KAA KES LAP OUL PIR SAT SKA UUS VAA VAR
KD 0 1 1 0 1 0 0 0 0 0 0
KESK 1 0 -1 -1 0 0 0 -1 0 -1 0
KOK -1 0 0 0 0 0 0 0 -2 0 0
KP 0 0 0 0 0 1 0 0 0 0 0
NYT 1 0 0 0 0 0 0 0 0 0 0
Nyt 0 0 0 0 0 0 0 0 1 0 0
PIR 1 0 0 0 0 0 0 0 0 0 0
PS 0 -1 0 0 0 -1 0 0 -1 0 -1
RKP 0 0 0 0 0 0 0 0 1 -1 0
SDP 0 -1 0 0 0 -1 -1 0 -1 0 0
SIN 0 0 0 0 0 0 0 1 1 0 0
STL 0 0 0 0 0 0 0 0 1 0 0
VAS -1 1 0 0 -1 1 0 0 0 1 0
VIHR -1 0 0 1 0 0 1 0 0 1 1

4.2) Distribute seats among districts as well

Normally the number of seats per district is defined before an election, based on census data. However, you could also assign the number of seats per district, based on the actual votes cast in every district. This way, each districts seat share is proportional to its vote share. To do this, we use the total number of seats for the district_seats parameter.

full_biproportional = biproporz(votes_matrix, 
                                district_seats = sum(district_seats),
                                use_list_votes = FALSE)

# party seat distribution has not changed
rowSums(full_biproportional) - rowSums(seats_biproportional)
#>   Asyl   E117   E118   E154   E168   E169   E185   E191   E192   E287   E491 
#>      0      0      0      0      0      0      0      0      0      0      0 
#>   E492   E493    EOP     FP     IP     KD   KESK    KOK     KP    KTP   LIBE 
#>      0      0      0      0      0      0      0      0      0      0      0 
#>    LII   LIIK     LN   LNLY    LNY   LNYL    NYT    Nyt    PEL    PIR     PS 
#>      0      0      0      0      0      0      0      0      0      0      0 
#>    REF    RKP    RLI Reform    SDP    SIN    SKE    SKP    STL    VAS   VIHR 
#>      0      0      0      0      0      0      0      0      0      0      0

# district seat distribution is different
colSums(full_biproportional) - colSums(seats_biproportional)
#> HEL HÄM KAA KES LAP OUL PIR SAT SKA UUS VAA VAR 
#>   3  -1  -1   0   0  -1   0   0  -1   0   0   1

As we can see, the number of party seats does not change. However, districts where more people voted get a higher share of the seats. 2 districts gain seats, 4 districts lose a seat.


5) Effect of a system change on seat distribution

As a last example, we’ll look at the changes in seat distribution biproportional apportionment had in the 2020 parliament election in the Swiss canton of Uri. In Uri, 2020 was the first year the cantonal parliament was elected with biproportional apportionment for some municipalities. Previously, these four municipalities used the Hagenbach-Bischoff method. We’ll ignore all other municipalities which use a majoritarian electoral system.

seats_old_system = apply_proporz(uri2020$votes_matrix, uri2020$seats_vector, "hagenbach-bischoff")

seats_new_system = biproporz(uri2020$votes_matrix, uri2020$seats_vector)

seats_new_system-seats_old_system
#>      Altdorf Bürglen Erstfeld Schattdorf
#> CVP        1       0        0          0
#> SPGB      -1       0        0          0
#> FDP        0       0        0          0
#> SVP        0       0        0          0

Compared to the previous election system there was a change of one seat (out of 37).

mirror server hosted at Truenetwork, Russian Federation.