Introduction to the construction of decision trees

Paola Cognigni and Andrew Sims

October 2021

Decision Tree representations

A decision tree is a decision model that represents all possible pathways through sequences of events (nodes), which can be under the experimenter’s control (decisions) or not (chances). A decision tree can be represented visually according to a standardised grammar:

Nodes are linked by edges:

rdecision builds a Decision Tree model by defining these elements and their relationships. For example, consider the fictitious and idealized decision problem, introduced in the package README file, of choosing between providing two forms of lifestyle advice, offered to people with vascular disease, which reduce the risk of needing an interventional procedure. The cost to a healthcare provider of the interventional procedure (e.g., inserting a stent) is 5000 GBP; the cost of providing the current form of lifestyle advice, an appointment with a dietician (“diet”), is 50 GBP and the cost of providing an alternative form, attendance at an exercise programme (“exercise”), is 750 GBP. If an advice programme is successful, there is no need for an interventional procedure. These costs can be defined as scalar variables, as follows:

cost_diet <- 50.0
cost_exercise <- 750.0
cost_stent <- 5000.0

The model for this fictional scenario can be defined by the following elements:

decision_node <- DecisionNode$new("Programme")
chance_node_diet <- ChanceNode$new("Outcome")
chance_node_exercise <- ChanceNode$new("Outcome")
leaf_node_diet_no_stent <- LeafNode$new("No intervention")
leaf_node_diet_stent <- LeafNode$new("Intervention")
leaf_node_exercise_no_stent <- LeafNode$new("No intervention")
leaf_node_exercise_stent <- LeafNode$new("Intervention")

These nodes can then be wired into a decision tree graph by defining the edges that link pairs of nodes as actions or reactions.

Actions

These are the two programmes being tested. The cost of each action, as described in the example, is embedded into the action definition.

action_diet <- Action$new(
  decision_node, chance_node_diet, cost = cost_diet, label = "Diet"
)
action_exercise <- Action$new(
  decision_node, chance_node_exercise, cost = cost_exercise, label = "Exercise"
)

Reactions

These are the possible outcomes of each programme (success or failure), with their relevant probabilities.

To continue our fictional example, in a small trial of the “diet” programme, 12 out of 68 patients (17.6%) avoided having an interventional procedure within one year, and in a separate small trial of the “exercise” programme 18 out of 58 patients (31.0%) avoided the interventional procedure within one year (it is assumed that the baseline characteristics in the two trials were comparable).

s_diet <- 12L
f_diet <- 56L
s_exercise <- 18L
f_exercise <- 40L

Epidemiologically, we can interpret the trial results in terms of the incidence proportions of having an adverse event (needing a stent) within one year, for each treatment strategy.

ip_diet <- f_diet / (s_diet + f_diet)
ip_exercise <- f_exercise / (s_exercise + f_exercise)
nnt <- 1.0 / (ip_diet - ip_exercise)

The incidence proportions are 0.82 and 0.69 for diet and exercise, respectively, noting that we define a programme failure as the need to insert a stent. The number needed to treat is the reciprocal of the difference in incidence proportions; 7.47 people must be allocated to the exercise programme rather than the diet programme to save one adverse event.

These trial results can be represented as probabilities of outcome success (p_diet, p_exercise) derived from the incidence proportions of the trial results. The probabilities of outcome failure are denoted with “q” prefixes.

p_diet <- 1.0 - ip_diet
p_exercise <- 1.0 - ip_exercise
q_diet <- 1.0 - p_diet
q_exercise <- 1.0 - p_exercise

These probabilities, as well as the cost associated with each outcome, can then be embedded into the reaction definition.

reaction_diet_success <- Reaction$new(
  chance_node_diet, leaf_node_diet_no_stent,
  p = p_diet, cost = 0.0, label = "Success"
)

reaction_diet_failure <- Reaction$new(
  chance_node_diet, leaf_node_diet_stent,
  p = q_diet, cost = cost_stent, label = "Failure"
)

reaction_exercise_success <- Reaction$new(
  chance_node_exercise, leaf_node_exercise_no_stent,
  p = p_exercise, cost = 0.0, label = "Success"
)

reaction_exercise_failure <- Reaction$new(
  chance_node_exercise, leaf_node_exercise_stent,
  p = q_exercise, cost = cost_stent, label = "Failure"
)

When all the elements are defined and satisfy the restrictions of a Decision Tree (see the documentation for the DecisionTree class for details), the whole model can be built:

dt <- DecisionTree$new(
  V = list(
    decision_node,
    chance_node_diet,
    chance_node_exercise,
    leaf_node_diet_no_stent,
    leaf_node_diet_stent,
    leaf_node_exercise_no_stent,
    leaf_node_exercise_stent
  ),
  E = list(
    action_diet,
    action_exercise,
    reaction_diet_success,
    reaction_diet_failure,
    reaction_exercise_success,
    reaction_exercise_failure
  )
)

rdecision includes a draw method to generate a diagram of a defined Decision Tree.

dt$draw()

Evaluating a decision tree

Base case

As a decision model, a Decision Tree takes into account the costs, probabilities and utilities encountered as each strategy is traversed from left to right. In this example, only two strategies (Diet or Exercise) exist in the model and can be compared using the evaluate() method.

rs <- dt$evaluate()
Run Programme Probability Cost Benefit Utility QALY
1 Diet 1 4167.65 0 1 1
1 Exercise 1 4198.28 0 1 1

From the evaluation of the two strategies, it is apparent that the Diet strategy has a marginally lower net cost by 30.63 GBP.

Because this example is structurally simple, we can verify the results by direct calculation. The net cost per patient of the diet programme is the cost of delivering the advice (50.00 GBP) plus the cost of inserting a stent (5,000.00 GBP) multiplied by the proportion who require a stent, or the failure rate of the programme, 0.82, equal to 4,167.65 GBP. By a similar argument, the net cost per patient of the exercise programme is 4,198.28 GBP, as the model predicts. If 7.47 patients are required to change from the diet programme to the exercise programme to save one stent, the incremental increase in cost of delivering the advice is the number needed to treat multiplied by the difference in the cost of the programmes, 750.00 GBP - 50.00 GBP, or 5,228.79 GBP. Because this is greater than the cost saved by avoiding one stent (5,000.00 GBP), we can see that the additional net cost per patient of delivering the programme is the difference between these costs, divided by the number needed to treat, or 30.63 GBP, as the model predicts.

Note that this approach aggregates multiple paths that belong to the same strategy (for example, the Success and Failure paths of the Diet strategy). The option by = "path" can be used to evaluate each path separately.

rp <- dt$evaluate(by = "path")
Run Programme Leaf Probability Cost Benefit Utility QALY
1 Diet Intervention 0.824 4158.82 0 0.824 0.824
1 Diet No.intervention 0.176 8.82 0 0.176 0.176
1 Exercise Intervention 0.690 3965.52 0 0.690 0.690
1 Exercise No.intervention 0.310 232.76 0 0.310 0.310

Adjustment for disutility

Cost is not the only consideration that can be modelled using a Decision Tree. Suppose that requiring an intervention reduces the quality of life of patients, associated with attending pre-operative appointments, pain and discomfort of the procedure, and adverse events. This is estimated to be associated with a mean disutility of 0.05 for those who receive a stent, assumed to persist over 1 year.

To incorporate this into the model, we can set the utility of the two leaf nodes which are associated with having a stent. Because we are changing the property of two nodes in the tree, and not changing the tree structure, we do not have to rebuild the tree.

du_stent <- 0.05
leaf_node_diet_stent$set_utility(1.0 - du_stent)
leaf_node_exercise_stent$set_utility(1.0 - du_stent)
rs <- dt$evaluate()
Run Programme Probability Cost Benefit Utility QALY
1 Diet 1 4167.65 0 0.959 0.959
1 Exercise 1 4198.28 0 0.966 0.966

In this case, while the Diet strategy is preferred from a cost perspective, the utility of the Exercise strategy is superior. rdecision also calculates Quality-adjusted life-years (QALYs) taking into account the time horizon of the model (in this case, the default of one year was used, and therefore QALYs correspond to the Utility values). From these figures, the Incremental cost-effectiveness ratio (ICER) can be easily calculated:

delta_c <- rs[[which(rs[, "Programme"] == "Exercise"), "Cost"]] -
  rs[[which(rs[, "Programme"] == "Diet"), "Cost"]]
delta_u <- rs[[which(rs[, "Programme"] == "Exercise"), "Utility"]] -
  rs[[which(rs[, "Programme"] == "Diet"), "Utility"]]
icer <- delta_c / delta_u

resulting in a cost of 4575.76 GBP per QALY gained in choosing the more effective Exercise strategy over the cheaper Diet strategy.

This can be verified by direct calculation, by dividing the difference in net costs of the two programmes (30.63 GBP) by the increase in QALYs due to stents saved (0.05 multiplied by the difference in success rates of the programme, (0.31 - 0.176), or 0.007 QALYs), an ICER of 4,575.76 GBP / QALY.

Introducing probabilistic elements

The model shown above uses a fixed value for each parameter, resulting in a single point estimate for each model result. However, parameters may be affected by uncertainty: for example, the success probability of each strategy is extracted from a small trial of few patients. This uncertainty can be incorporated into the Decision Tree model by representing individual parameters with a statistical distribution, then repeating the evaluation of the model multiple times with each run randomly drawing parameters from these defined distributions.

In rdecision, model variables that are described by a distribution are represented by ModVar objects. Many commonly used distributions, such as the Normal, Log-Normal, Gamma and Beta distributions are included in the package, and additional distributions can be easily implemented from the generic ModVar class. Additionally, model variables that are calculated from other r probabilistic variables using an expression can be represented as ExprModVar objects.

Fixed costs can be left as numerical values, or also be represented by ModVars which ensures that they are included in variable tabulations.

cost_diet <- ConstModVar$new("Cost of diet programme", "GBP", 50.0)
cost_exercise <- ConstModVar$new("Cost of exercise programme", "GBP", 750.0)
cost_stent <- ConstModVar$new("Cost of stent intervention", "GBP", 5000.0)

In our simplified example, the probability of success of each strategy should include the uncertainty associated with the small sample that they are based on. This can be represented statistically by a Beta distribution, a probability distribution constrained to the interval [0, 1]. A Beta distribution that captures the results of the trials can be defined by the alpha (observed successes) and beta (observed failures) parameters.

p_diet <- BetaModVar$new(
  alpha = s_diet, beta = f_diet, description = "P(diet)", units = ""
)
p_exercise <- BetaModVar$new(
  alpha = s_exercise, beta = f_exercise, description = "P(exercise)", units = ""
)

q_diet <- ExprModVar$new(
  rlang::quo(1.0 - p_diet), description = "1 - P(diet)", units = ""
)
q_exercise <- ExprModVar$new(
  rlang::quo(1.0 - p_exercise), description = "1 - P(exercise)", units = ""
)

These distributions describe the probability of success of each strategy; by the constraints of a Decision Tree, the sum of all probabilities associated with a chance node must be 1, so the probability of failure should be calculated as 1 - p(Success). This can be represented by an ExprModVar.

The newly defined ModVars can be incorporated into the Decision Tree model using the same grammar as the non-probabilistic model. Because the actions and reactions are objects already included in the tree, we can change their properties using set_ calls and those new properties will be used when the tree is evaluated.

action_diet$set_cost(cost_diet)
action_exercise$set_cost(cost_exercise)
reaction_diet_success$set_probability(p_diet)

reaction_diet_failure$set_probability(q_diet)
reaction_diet_failure$set_cost(cost_stent)

reaction_exercise_success$set_probability(p_exercise)

reaction_exercise_failure$set_probability(q_exercise)
reaction_exercise_failure$set_cost(cost_stent)

All the probabilistic variables included in the model can be tabulated using the modvar_table() method, which details the distribution definition and some useful parameters, such as mean, SD and 95% CI.

Description Units Distribution Mean E SD Q2.5 Q97.5 Est
Cost of stent intervention GBP Const(5000) 5000.000 5000.000 0.000 5000.000 5000.000 FALSE
1 - P(diet) 1 - p_diet 0.824 0.824 0.046 0.722 0.902 TRUE
P(diet) Be(12,56) 0.176 0.176 0.046 0.096 0.275 FALSE
Cost of exercise programme GBP Const(750) 750.000 750.000 0.000 750.000 750.000 FALSE
Cost of diet programme GBP Const(50) 50.000 50.000 0.000 50.000 50.000 FALSE
P(exercise) Be(18,40) 0.310 0.310 0.060 0.199 0.434 FALSE
1 - P(exercise) 1 - p_exercise 0.690 0.691 0.060 0.565 0.798 TRUE

A call to the evaluate() method with the default settings uses the expected (mean) value of each variable, and so replicates the point estimate above.

rs <- dt$evaluate()
Run Programme Probability Cost Benefit Utility QALY
1 Diet 1 4167.65 0 0.96 0.96
1 Exercise 1 4198.28 0 0.97 0.97

However, because each variable is described by a distribution, it is now possible to explore the range of possible values consistent with the model. For example, a lower and upper bound can be estimated by setting each variable to its 2.5-th or 97.5-th percentile:

rs_025 <- dt$evaluate(setvars = "q2.5")
rs_975 <- dt$evaluate(setvars = "q97.5")

The costs for each choice when all variables are at their upper and lower confidence levels are as follows:

Q2.5 Q97.5
Diet 4569.40 3676.00
Exercise 4754.75 3579.87

To sample the possible outcomes in a completely probabilistic way, the setvar = "random" option can be used, which draws a random value from the distribution of each variable. Repeating this process a sufficiently large number of times builds a collection of results compatible with the model definition, which can then be used to calculate ranges and confidence intervals of the estimated values.

N <- 1000L
rs <- dt$evaluate(setvars = "random", by = "run", N = N)

The estimates of cost for each intervention can be plotted as follows:

plot(
  rs[, "Cost.Diet"],
  rs[, "Cost.Exercise"],
  pch = 20L,
  xlab = "Cost of diet (GBP)", ylab = "Cost of exercise (GBP)",
  main = paste(N, "simulations of vascular disease prevention model")
)
abline(a = 0.0, b = 1.0, col = "red")

A tabular summary is as follows:

Cost.Diet Cost.Exercise
Min. :3351 Min. :3181
1st Qu.:4032 1st Qu.:4008
Median :4188 Median :4229
Mean :4169 Mean :4207
3rd Qu.:4329 3rd Qu.:4422
Max. :4742 Max. :5018

The variables can be further manipulated, for example calculating the difference in cost between the two strategies for each run of the randomised model:

rs[, "Difference"] <- rs[, "Cost.Diet"] - rs[, "Cost.Exercise"]
CI <- quantile(rs[, "Difference"], c(0.025, 0.975))
hist(
  rs[, "Difference"], 100L,  main = "Distribution of saving",
  xlab = "Saving (GBP)"
)

knitr::kable(
  rs[1L : 10L, c(1L, 3L, 8L, 12L)], digits = 2L,
  row.names = FALSE
)
Run Cost.Diet Cost.Exercise Difference
1 4294.88 4086.98 207.90
2 4251.22 4032.02 219.20
3 3882.10 3880.43 1.67
4 3697.33 4243.93 -546.59
5 4221.99 4422.15 -200.16
6 4201.93 4271.73 -69.80
7 4212.78 4236.26 -23.49
8 3788.91 4184.11 -395.19
9 4087.15 3829.22 257.92
10 3698.31 4390.85 -692.54

Plotting the distribution of the difference of the two costs reveals that, in this model, the uncertainties in the input parameters are large enough that either strategy could have a lower net cost, within a 95% confidence interval [-771.19, 749.44].

Univariate threshold analysis

rdecision provides a threshold method to compare two strategies and identify, for a given variable, the value at which one strategy becomes cost saving over the other:

cost_threshold <- dt$threshold(
  index = list(action_exercise),
  ref = list(action_diet),
  outcome = "saving",
  mvd = cost_exercise$description(),
  a = 0.0, b = 5000.0, tol = 0.1
)

success_threshold <- dt$threshold(
  index = list(action_exercise),
  ref = list(action_diet),
  outcome = "saving",
  mvd = p_exercise$description(),
  a = 0.0, b = 1.0, tol = 0.001
)

By univariate threshold analysis, the exercise program will be cost saving when its cost of delivery is less than 719.38 GBP or when its success rate is greater than 31.7%.

These can be verified by direct calculation. The cost of delivering the exercise programme at which its net cost equals the net cost of the diet programme is when the difference between the two programme delivery costs multiplied by the number needed to treat becomes equal to the cost saved by avoiding one stent. This is 719.37, in agreement with the model. The threshold success rate for the exercise programme is when the number needed to treat is reduced such that the net cost of the two programmes is equal, i.e., to 7.14, from which we can calculate the programme success rate threshold as 0.32, in agreement with the model.

mirror server hosted at Truenetwork, Russian Federation.