Elementary Semi-Markov Model (Chancellor 1997)

Monotherapy versus combination therapy for HIV

Andrew J. Sims

May 2021

Introduction

This vignette is an example of an elementary semi-Markov model using the rdecision package. It is based on the example given by Briggs et al1 (Exercise 2.5) which itself is based on a model described by Chancellor et al2. The model compares a combination therapy of Lamivudine/Zidovudine versus Zidovudine monotherapy in people with HIV infection.

Creating the model

Model structure

The model is constructed by forming a graph, with each state as a node and each transition as an edge. Nodes of class MarkovState and edges of class Transition have various properties whose values reflect the variables of the model (costs, rates etc.). Because the model is intended to evaluate survival, the utility of states A, B and C are set to 1 (by default) and state D to zero. Thus the incremental quality adjusted life years gained per cycle is equivalent to the survival function. Because the structure of the model is identical for monotherapy and combination therapy, we will use the same model throughout. For this reason, the costs of occupancy of each state and the costs of making transitions between states are set to zero when the model is created, and will be changed each time the model is run.

# create Markov states
sA <- MarkovState$new("A")
sB <- MarkovState$new("B")
sC <- MarkovState$new("C")
sD <- MarkovState$new("D", utility = 0.0)
# create transitions
tAA <- Transition$new(sA, sA)
tAB <- Transition$new(sA, sB)
tAC <- Transition$new(sA, sC)
tAD <- Transition$new(sA, sD)
tBB <- Transition$new(sB, sB)
tBC <- Transition$new(sB, sC)
tBD <- Transition$new(sB, sD)
tCC <- Transition$new(sC, sC)
tCD <- Transition$new(sC, sD)
tDD <- Transition$new(sD, sD)
# set discount rates
cDR <- 6.0 # annual discount rate, costs (%)
oDR <- 0.0 # annual discount rate, benefits (%)
# construct the model
m <- SemiMarkovModel$new(
  V = list(sA, sB, sC, sD),
  E = list(tAA, tAB, tAC, tAD, tBB, tBC, tBD, tCC, tCD, tDD),
  discount.cost = cDR / 100.0,
  discount.utility = oDR / 100.0
)

Costs and discounts

The costs and discount rates used in the model (1995 rates) are numerical constants, and are defined as follows.

# drug costs
cAZT <- 2278.0 # zidovudine drug cost
cLam <- 2087.0 # lamivudine drug cost

# direct medical and community costs
dmca <- 1701.0 # direct medical costs associated with state A
dmcb <- 1774.0 # direct medical costs associated with state B
dmcc <- 6948.0 # direct medical costs associated with state C
ccca <- 1055.0 # Community care costs associated with state A
cccb <- 1278.0 # Community care costs associated with state B
cccc <- 2059.0 # Community care costs associated with state C

# occupancy costs with monotherapy
cAm <- dmca + ccca + cAZT
cBm <- dmcb + cccb + cAZT
cCm <- dmcc + cccc + cAZT

# occupancy costs with combination therapy
cAc <- dmca + ccca + cAZT + cLam
cBc <- dmcb + cccb + cAZT + cLam
cCc <- dmcc + cccc + cAZT + cLam

Treatment effect

The treatment effect was estimated by Chancellor et al2 via a meta-analysis, and is defined as follows:

RR <- 0.509

Transition rates and probabilities

Briggs et al1 interpreted the observed transition counts in 1 year as transition probabilities by dividing counts by the total transitions observed from each state. With this assumption, the annual (per-cycle) transition probabilities are calculated as follows and applied to the model via the set_probabilities function.

# transition counts
nAA <- 1251L
nAB <- 350L
nAC <- 116L
nAD <- 17L
nBB <- 731L
nBC <- 512L
nBD <- 15L
nCC <- 1312L
nCD <- 437L
# create transition matrix
nA <- nAA + nAB + nAC + nAD
nB <- nBB + nBC + nBD
nC <- nCC + nCD
Ptm <- matrix(
  c(nAA / nA, nAB / nA, nAC / nA, nAD / nA,
    0.0, nBB / nB, nBC / nB, nBD / nB,
    0.0,      0.0, nCC / nC, nCD / nC,
    0.0,      0.0,      0.0,      1.0),
  nrow = 4L, byrow = TRUE,
  dimnames = list(
    source = c("A", "B", "C", "D"), target = c("A", "B", "C", "D")
  )
)

More usually, fully observed transition counts are converted into transition rates, rather than probabilities, as described by Welton and Ades3. This is because counting events and measuring total time at risk includes individuals who make more than one transition during the observation time, and can lead to rates with values which exceed 1. In contrast, the difference between a census of the number of individuals in each state at the start of the interval and a census at the end is directly related to the per-cycle probability. As Miller and Homan4, Welton and Ades3, Jones et al5 and others note, conversion between rates and probabilities for multi-state Markov models is non-trivial5 and care is needed when modellers calculate probabilities from published rates for use in SemiMarkoModels.

Checking the model

Diagram

A representation of the model in DOT format (Graphviz) can be created using the as_DOT function of SemiMarkovModel. The function returns a character vector which can be saved in a file (.gv extension) for visualization with the dot tool of Graphviz, or plotted directly in R via the DiagrammeR package. The Markov model is shown in the figure below.

Markov model for comparison of HIV therapy.
           A: 200 < cd4 < 500, B: cd4 < 200, C: AIDS, D: Death.

Markov model for comparison of HIV therapy. A: 200 < cd4 < 500, B: cd4 < 200, C: AIDS, D: Death.

Per-cycle transition probabilities

The per-cycle transition probabilities are the cells of the Markov transition matrix. For the monotherapy model, the transition matrix is shown below. This is consistent with the Table 1 of Chancellor et al2.

  A B C D
A 0.7215 0.2018 0.0669 0.009804
B 0 0.5811 0.407 0.01192
C 0 0 0.7501 0.2499
D 0 0 0 1

Running the model

Model function cycle applies one cycle of a Markov model to a defined starting population in each state. It returns a table with one row per state, and each row containing several columns, including the population at the end of the state and the cost of occupancy of states, normalized by the number of patients in the cohort, with discounting applied.

Multiple cycles are run by feeding the state populations at the end of one cycle into the next. Function cycles does this and returns a data frame with one row per cycle, and each row containing the state populations and the aggregated cost of occupancy for all states, with discounting applied. This is done below for the first 20 cycles of the model for monotherapy, with discount. For convenience, and future use with probabilistic sensitivity analysis, a function, run_mono is used to wrap up the steps needed to run 20 cycles of the model for monotherapy. The arguments to the function are the transition probability matrix, the occupancy costs for states A, B, and C, and logical variables which determine whether to apply half-cycle correction to the state populations, costs and QALYs returned in the Markov trace.

# function to run model for 20 years of monotherapy
run_mono <- function(Ptm, cAm, cBm, cCm, hcc = FALSE) {
  # create starting populations
  N <- 1000L
  populations <- c(A = N, B = 0L, C = 0L, D = 0L)
  m$reset(populations)
  # set costs
  sA$set_cost(cAm)
  sB$set_cost(cBm)
  sC$set_cost(cCm)
  # set transition probabilities
  m$set_probabilities(Ptm)
  # run 20 cycles
  tr <- m$cycles(
    ncycles = 20L, hcc.pop = hcc, hcc.cost = FALSE, hcc.QALY = hcc
  )
  return(tr)
}

Coding note: In function run_mono, the occupancy costs for states A, B and C are set via calls to function set_cost() which is associated with a MarkovState object. Although these are set after the state objects sA, sB and sC have been added to model m, the updated costs are used when the model is cycled. This is because R’s R6 objects, such as Markov states and transitions, are passed by reference. That is, if an R6 object such as a MarkovState changes, any other object that refers to it, such as a SemiMarkovModel will see the changes. This behaviour is different from regular R variable types, such as numeric variables, which are passed by value; that is, a copy of them is created within the function to which they are passed, and any change to the original would not apply to the copy.

The model is run by calling the new function, with appropriate arguments. The cumulative cost and life years are calculated by summing the appropriate columns from the Markov trace, as follows:

MT.mono <- run_mono(Ptm, cAm, cBm, cCm)
el.mono <- sum(MT.mono$QALY)
cost.mono <- sum(MT.mono$Cost)

The populations and discounted costs are consistent with Briggs et al, Table 2.31, and the QALY column is consistent with Table 2.4 (without half cycle correction). No discount was applied to the utilities.

Years A B C D Cost QALY
0 1000 0 0 0 0 0
1 721 202 67 10 5153 0.99
2 520 263 181 36 5393 0.964
3 376 258 277 89 5368 0.911
4 271 226 338 165 5055 0.835
5 195 186 364 255 4541 0.745
6 141 147 361 350 3929 0.65
7 102 114 341 444 3301 0.556
8 73 87 309 531 2708 0.469
9 53 65 272 610 2179 0.39
10 38 49 234 679 1727 0.321
11 28 36 198 739 1350 0.261
12 20 26 165 789 1045 0.211
13 14 19 136 830 801 0.17
14 10 14 111 865 609 0.135
15 7 10 90 893 460 0.107
16 5 8 72 915 346 0.085
17 4 5 57 933 258 0.067
18 3 4 45 948 192 0.052
19 2 3 36 959 142 0.041
20 1 2 28 968 105 0.032

Model results

Monotherapy

The estimated life years is approximated by summing the proportions of patients left alive at each cycle (Briggs et al1, Exercise 2.5). This is an approximation because it ignores the population who remain alive after 21 years, and assumes all deaths occurred at the start of each cycle. For monotherapy the expected life gained is 7.991 years at a cost of 44,663 GBP.

Combination therapy

For combination therapy, a similar model was created, with adjusted costs and transition rates. Following Briggs et al1 the treatment effect was applied to the probabilities, and these were used as inputs to the model. More usually, treatment effects are applied to rates, rather than probabilities.

# annual probabilities modified by treatment effect
pAB <- RR * nAB / nA
pAC <- RR * nAC / nC
pAD <- RR * nAD / nA
pBC <- RR * nBC / nB
pBD <- RR * nBD / nB
pCD <- RR * nCD / nC
# annual transition probability matrix
Ptc <- matrix(
  c(1.0 - pAB - pAC - pAD,               pAB,         pAC, pAD,
    0.0, (1.0 - pBC - pBD),         pBC, pBD,
    0.0,               0.0, (1.0 - pCD), pCD,
    0.0,               0.0,         0.0, 1.0),
  nrow = 4L, byrow = TRUE,
  dimnames = list(
    source = c("A", "B", "C", "D"), target = c("A", "B", "C", "D")
  )
)

The resulting per-cycle transition matrix for the combination therapy is as follows:

  A B C D
A 0.8585 0.1027 0.03376 0.00499
B 0 0.7868 0.2072 0.006069
C 0 0 0.8728 0.1272
D 0 0 0 1

In this model, lamivudine is given for the first 2 years, with the treatment effect assumed to persist for the same period. The state populations and cycle numbers are retained by the model between calls to cycle or cycles and can be retrieved by calling get_populations. In this example, the combination therapy model is run for 2 cycles, then the population is used to continue with the monotherapy model for the remaining 18 years. The reset function is used to set the cycle number and elapsed time of the new run of the mono model. As before, function run_comb is created to wrap up these steps, so they can be used repeatedly for different values of the model variables.

# function to run model for 2 years of combination therapy and 18 of monotherapy
run_comb <- function(Ptm, cAm, cBm, cCm, Ptc, cAc, cBc, cCc, hcc = FALSE) {
  # set populations
  N <- 1000L
  populations <- c(A = N, B = 0L, C = 0L, D = 0L)
  m$reset(populations)
  # set the transition probabilities accounting for treatment effect
  m$set_probabilities(Ptc)
  # set the costs including those for the additional drug
  sA$set_cost(cAc)
  sB$set_cost(cBc)
  sC$set_cost(cCc)
  # run first 2 yearly cycles with additional drug costs and tx effect
  tr <- m$cycles(2L, hcc.pop = hcc, hcc.cost = FALSE, hcc.QALY = hcc)
  # save the state populations after 2 years
  populations <- m$get_populations()
  # revert probabilities to those without treatment effect
  m$set_probabilities(Ptm)
  # revert costs to those without the extra drug
  sA$set_cost(cAm)
  sB$set_cost(cBm)
  sC$set_cost(cCm)
  # restart the model with populations from first 2 years with extra drug
  m$reset(
    populations,
    icycle = 2L,
    elapsed = as.difftime(365.25 * 2.0, units = "days")
  )
  # run for next 18 years, combining the traces
  tr <- rbind(
    tr,
    m$cycles(ncycles = 18L, hcc.pop = hcc, hcc.cost = FALSE, hcc.QALY = hcc)
  )
  # return the trace
  return(tr)
}

The model is run by calling the new function, with appropriate arguments, as follows. The incremental cost effectiveness ratio (ICER) is also calculated, as the ratio of the incremental cost to the incremental life years of the combination therapy compared with monotherapy.

MT.comb <- run_comb(Ptm, cAm, cBm, cCm, Ptc, cAc, cBc, cCc)
el.comb <- sum(MT.comb$QALY)
cost.comb <- sum(MT.comb$Cost)
icer <- (cost.comb - cost.mono) / (el.comb - el.mono)

The Markov trace for combination therapy is as follows:

Years A B C D Cost QALY
0 1000 0 0 0 0 0
1 859 103 34 5 6912 0.995
2 737 169 80 14 6736 0.986
3 532 247 178 43 5039 0.957
4 384 251 270 96 4998 0.904
5 277 223 330 170 4713 0.83
6 200 186 357 258 4245 0.742
7 144 148 357 351 3684 0.649
8 104 115 337 443 3102 0.557
9 75 88 307 530 2551 0.47
10 54 66 271 609 2057 0.391
11 39 49 234 678 1633 0.322
12 28 37 198 737 1279 0.263
13 20 27 165 787 990 0.213
14 15 20 136 829 760 0.171
15 11 14 111 864 579 0.136
16 8 11 90 892 437 0.108
17 6 8 72 914 329 0.086
18 4 6 58 933 246 0.067
19 3 4 46 947 183 0.053
20 2 3 36 959 136 0.041

Comparison of treatments

Over the 20 year time horizon, the expected life years gained for monotherapy was 7.991 years at a total cost per patient of 44,663 GBP. The expected life years gained with combination therapy for two years was 8.94 at a total cost per patient of 50,607 GBP. The incremental change in life years was 0.949 years at an incremental cost of 5,944 GBP, giving an ICER of 6,264 GBP/QALY. This is consistent with the result obtained by Briggs et al1 (6276 GBP/QALY), within rounding error.

Results with half-cycle correction

With half-cycle correction applied to the state populations, the model can be recalculated as follows.

MT.mono.hcc <- run_mono(Ptm, cAm, cBm, cCm, hcc = TRUE)
el.mono.hcc <- sum(MT.mono.hcc$QALY)
cost.mono.hcc <- sum(MT.mono.hcc$Cost)
MT.comb.hcc <- run_comb(Ptm, cAm, cBm, cCm, Ptc, cAc, cBc, cCc, hcc = TRUE)
el.comb.hcc <- sum(MT.comb.hcc$QALY)
cost.comb.hcc <- sum(MT.comb.hcc$Cost)
icer.hcc <- (cost.comb.hcc - cost.mono.hcc) / (el.comb.hcc - el.mono.hcc)

Over the 20 year time horizon, the expected life years gained for monotherapy was 8.475 years at a total cost per patient of 44,663 GBP. The expected life years gained with combination therapy for two years was 9.419 at a total cost per patient of 50,607 GBP. The incremental change in life years was 0.944 years at an incremental cost of 5,944 GBP, giving an ICER of 6,295 GBP/QALY.

Probabilistic sensitivity analysis

In their Exercise 4.7, Briggs et al1 extended the original model to account for uncertainty in the estimates of the values of the model variables. In this section, the exercise is replicated in rdecision, using the same assumptions.

Costs

Although it is possible to sample from uncertainty distributions using the functions in R standard package stats (e.g., rbeta), rdecision introduces the notion of a ModVar, which is an object that can represent a model variable with an uncertainty distribution. Many of the class methods in redecision will accept a ModVar as alternative to a numerical value as an argument, and will automatically sample from its uncertainty distribution.

The model costs are represented as ModVars of various types, as follows. The state occupancy costs for both models involve a summation of other variables. Package rdecision introduces a form of ModVar that is defined as a mathematical expression (an ExprModVar) potentially involving ModVars. The uncertainty distribution of cAm, for example, is complex, because it is a sum of two Gamma-distributed variables and a scalar, but rdecision takes care of this when cAm is sampled.

# direct medical and community costs (modelled as gamma distributions)
dmca <- GammaModVar$new("dmca", "GBP", shape = 1.0, scale = 1701.0)
dmcb <- GammaModVar$new("dmcb", "GBP", shape = 1.0, scale = 1774.0)
dmcc <- GammaModVar$new("dmcc", "GBP", shape = 1.0, scale = 6948.0)
ccca <- GammaModVar$new("ccca", "GBP", shape = 1.0, scale = 1055.0)
cccb <- GammaModVar$new("cccb", "GBP", shape = 1.0, scale = 1278.0)
cccc <- GammaModVar$new("cccc", "GBP", shape = 1.0, scale = 2059.0)

# occupancy costs with monotherapy
cAm <- ExprModVar$new("cA", "GBP", rlang::quo(dmca + ccca + cAZT))
cBm <- ExprModVar$new("cB", "GBP", rlang::quo(dmcb + cccb + cAZT))
cCm <- ExprModVar$new("cC", "GBP", rlang::quo(dmcc + cccc + cAZT))

# occupancy costs with combination therapy
cAc <- ExprModVar$new("cAc", "GBP", rlang::quo(dmca + ccca + cAZT + cLam))
cBc <- ExprModVar$new("cBc", "GBP", rlang::quo(dmcb + cccb + cAZT + cLam))
cCc <- ExprModVar$new("cCc", "GBP", rlang::quo(dmcc + cccc + cAZT + cLam))

Treatment effect

The treatment effect is also represented by a ModVar whose uncertainty follows a log normal distribution.

RR <- LogNormModVar$new(
  "Tx effect", "RR", p1 = 0.509, p2 = (0.710 - 0.365) / (2.0 * 1.96), "LN7"
)

Transition matrix

The following function generates a transition probability matrix from observed counts, using Dirichlet distributions, as described by Briggs et al. This could be achieved using the R stats function rgamma, but rdecision offers the DirichletDistribition class for convenience, which is used here.

# function to generate a probabilistic transition matrix
pt_prob <- function() {
  # create Dirichlet distributions for conditional probabilities
  DA <- DirichletDistribution$new(c(1251L, 350L, 116L, 17L)) # from A # nolint
  DB <- DirichletDistribution$new(c(731L, 512L, 15L))  # from B # nolint
  DC <- DirichletDistribution$new(c(1312L, 437L)) # from C # nolint
  # sample from the Dirichlet distributions
  DA$sample()
  DB$sample()
  DC$sample()
  # create the transition matrix
  Pt <- matrix(
    c(DA$r(), c(0.0, DB$r()), c(0.0, 0.0, DC$r()), c(0.0, 0.0, 0.0, 1.0)),
    byrow = TRUE,
    nrow = 4L,
    dimnames = list(
      source = c("A", "B", "C", "D"), target = c("A", "B", "C", "D")
    )
  )
  return(Pt)
}

Running the PSA

The following code runs 1000 iterations of the model. At each run, the model variables are sampled from their uncertainty distributions, the transition matrix is sampled from count data, and the treatment effect is applied. Functions run_mono and run_comb are used to generate Markov traces for each form of therapy, and the incremental costs, life years and ICER for each run are saved in a matrix.

# create matrix to hold the incremental costs and life years for each run
psa <- matrix(
  data = NA_real_, nrow = 1000L, ncol = 5L,
  dimnames = list(
    NULL, c("el.mono", "cost.mono", "el.comb", "cost.comb", "icer")
  )
)

# run the model repeatedly
for (irun in seq_len(nrow(psa))) {

  # sample variables from their uncertainty distributions
  cAm$set("random")
  cBm$set("random")
  cCm$set("random")
  cAc$set("random")
  cBc$set("random")
  cCc$set("random")
  RR$set("random")

  # sample the probability transition matrix from observed counts
  Ptm <- pt_prob()

  # run monotherapy model
  MT.mono <- run_mono(Ptm, cAm, cBm, cCm, hcc = TRUE)
  el.mono <- sum(MT.mono$QALY)
  cost.mono <- sum(MT.mono$Cost)
  psa[[irun, "el.mono"]] <- el.mono
  psa[[irun, "cost.mono"]] <- cost.mono

  # create Pt for combination therapy (Briggs applied the RR to the transition
  # probabilities - not recommended, but done here for reproducibility).
  Ptc <- Ptm
  for (i in 1L:4L) {
    for (j in 1L:4L) {
      Ptc[[i, j]] <- ifelse(i == j, NA, RR$get() * Ptc[[i, j]])
    }
    Ptc[i, which(is.na(Ptc[i, ]))] <- 1.0 - sum(Ptc[i, ], na.rm = TRUE)
  }

  # run combination therapy model
  MT.comb <- run_comb(Ptm, cAm, cBm, cCm, Ptc, cAc, cBc, cCc, hcc = TRUE)
  el.comb <- sum(MT.comb$QALY)
  cost.comb <- sum(MT.comb$Cost)
  psa[[irun, "el.comb"]] <- el.comb
  psa[[irun, "cost.comb"]] <- cost.comb

  # calculate the icer
  psa[[irun, "icer"]] <- (cost.comb - cost.mono) / (el.comb - el.mono)
}

Coding note: The state occupancy costs cAm, cBm etc. are now ModVars, rather than numeric variables as they were in the deterministic model. However, they can still be passed as arguments to MarkovState$set_cost(), via the arguments to helper functions run_mono and run_comb, and rdecision will manage them appropriately, without changing any other code. Documentation for functions in rdecision explains where this is supported by the package.

Results

The mean (95% confidence interval) for the cost of monotherapy was 45,007 (22,208 to 92,719) GBP, and the mean (95% CI) cost for combination therapy was 50,841 (27,858 to 96,642) GBP. The life years gained for monotherapy was 8.488 (8.105 to 8.928), and the life years gained for combination therapy was 9.429 (8.928 to 9.962). The mean ICER was 6,388 GBP/QALY with 95% confidence interval 2,863 to 11,089 GBP/QALY.

References

1.
Briggs, A., Claxton, K. & Sculpher, M. Decision modelling for health economic evaluation. (Oxford University Press, 2006).
2.
Chancellor, J. V., Hill, A. M., Sabin, C. A., Simpson, K. N. & Youle, M. Modelling the cost effectiveness of lamivudine/zidovudine combination therapy in HIV infection. Pharmacoeconomics 12, 54–66 (1997).
3.
4.
Miller, D. K. & Homan, S. M. Determining transition probabilities: Confusion and suggestions. Med Decis Making 14, 52–58 (1994).
5.
Jones, E., Epstein, D. & García-Mochón, L. A procedure for deriving formulas to convert transition rates to probabilities for multistate markov models. Med Decis Making 37, 779–789 (2017).

mirror server hosted at Truenetwork, Russian Federation.