next up previous contents
Next: Common parameters Up: Drawing objects Previous: Drawing objects

Parameters for different objects

typ=2 Text
x1,y1 reference point
ly = 0 aligned left and bottom
ly = 1 centered all
ly = 2 aligned right and bottom
ly = 3 horizontally centered, aligned bottom
ly = 4 aligned left and top
ly = 5 aligned right and top
ly = 6 horizontally centered, aligned top
ly = 7 aligned left, vertically centered
ly = 8 aligned right, vertically centered
linientyp number of font
the following line contains the text string!

typ=3 line
x1,y1 first end point
x2,y2 second end point

typ=5 circle
x1,y1 center point
lx radius
ly = lx

typ=6 filled circle
x1,y1 center point
lx radius
ly = lx

typ=7 circular arc
x1,y1 center point
lx radius
ly = lx
wanf angle of start point (in 0.1 degrees), 0 <= wanf <= 3600
wend angle of end point (in 0.1 degrees), 0 <= wend <= 3600

typ=8 ellipse
x1,y1 center point
lx semimajor axis
ly semiminor axis

typ=9 filled ellipse
x1,y1 center point
lx semimajor axis
ly semiminor axis

typ=10 elliptic arc
x1,y1 center point
lx semimajor axis
ly semiminor axis
wanf angle of start point (in 0.1 degrees), 0 <= wanf <= 3600
wend angle of end point (in 0.1 degrees), 0 <= wend <= 3600

typ=11 filled rectangle
x1,y1 first vertix
xb1,yb1 second vertix
x2,y2 third vertix (diagonal to the first)
xb2,yb2 fourth vertix

typ=12 Bezier curve
x1,y1 start point
xb1,yb1 point to define tangent to start point
xb2,yb2 point to define tangent to end point
x2,y2 end point

typ=13 filled triangle
x1,y1 first vertix
xb1,yb1 second vertix
x2,y2 third vertix

typ=14 filled quadrangle
x1,y1 first vertix
xb1,yb1 second vertix
x2,y2 third vertix (diagonal to the first)
xb2,yb2 fourth vertix

typ=15 filled circular arc
x1,y1 center point
lx radius
ly = lx
wanf angle of start point (in 0.1 degrees), 0 <= wanf <= 3600
wend angle of end point (in 0.1 degrees), 0 <= wend <= 3600

typ=16 filled elliptic arc
x1,y1 center point
lx semimajor axis
ly semiminor axis
wanf angle of start point (in 0.1 degrees), 0 <= wanf <= 3600
wend angle of end point (in 0.1 degrees), 0 <= wend <= 3600



next up previous contents
Next: Common parameters Up: Drawing objects Previous: Drawing objects



Hans-J. Siegert
Sat Jul 5 19:31:53 MEST 1997

mirror server hosted at Truenetwork, Russian Federation.