###
### Thu Jul 1 07:39:55 EST 2004:
### /usr/pkg/bin/bmake bulk-package for squidGuard-1.2.0nb2
### Current pkg count:  5 installed packages: digest-20021220 openssl-0.9.6m patch-2.5.4nb2 perl-5.8.4 xpkgwedge-1.10
###
BULK> Full rebuild in progress...
BULK> Cleaning package and its depends
===> Cleaning for squidGuard-1.2.0nb2
===> Cleaning for db3-3.11.2nb1
===> Cleaning for libtool-base-1.5.6nb1
===> Cleaning for patch-2.5.4nb2
BULK> Removing installed packages which are not needed to build squidGuard-1.2.0nb2
BULK> Keeping BULK_PREREQ: digest-20021220 (pkgtools/digest)
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r xpkgwedge-1.10
pkg_delete: package 'xpkgwedge-1.10' doesn't have a prefix
pkg_delete: package 'xpkgwedge-1.10' doesn't have a prefix
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r openssl-0.9.6m
/usr/pkg/sbin/pkg_delete -K /var/db/pkg -r perl-5.8.4
BULK> squidGuard-1.2.0nb2 requires installed package patch-2.5.4nb2 (devel/patch) to build.
BULK> Installing packages which are required to build squidGuard-1.2.0nb2.
BULK>  /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/SunOS/5.9/sparc/All/db3-3.11.2nb1.tgz
BULK>  /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/SunOS/5.9/sparc/All/libtool-base-1.5.6nb1.tgz
BULK> Required package patch-2.5.4nb2 (devel/patch) is already installed
BULK> Required package digest-20021220 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (squidGuard-1.2.0nb2)
===> Checking for vulnerabilities in squidGuard-1.2.0nb2
=> Checksum OK for squidGuard-1.2.0.tar.gz.
work -> /work/pkgbuild/www/squidGuard/work
===> Extracting for squidGuard-1.2.0nb2
===> Required installed package db3>=2.9.2: db3-3.11.2nb1 found
===> Required installed package patch>=2.2: patch-2.5.4nb2 found
===> Patching for squidGuard-1.2.0nb2
===> Applying pkgsrc patches for squidGuard-1.2.0nb2
===> Overriding tools for squidGuard-1.2.0nb2
===> Buildlinking for squidGuard-1.2.0nb2
===> Configuring for squidGuard-1.2.0nb2
configure: WARNING: If you wanted to set the --build type, don't use --host.
    If a cross compiler is detected then cross compile mode will be used.
checking for sparc-sun-solaris2-gcc... cc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix... 
checking for object suffix... o
checking whether we are using the GNU C compiler... no
checking whether cc accepts -g... yes
checking how to run the C preprocessor... cc -E
checking whether bmake sets ${MAKE}... yes
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking for bison... yacc
checking for flex... no
checking for lex... lex
checking for yywrap in -lfl... no
checking for yywrap in -ll... yes
checking lex output file root... lex.yy
checking whether yytext is a pointer... no
checking for lynx... false
checking for perl... no

** No Perl found in the PATH. Perl is required
   for blocked.cgi to work 

checking for db_version in -ldb3... yes
checking for ANSI C header files... yes
checking for db.h... yes
checking for regex.h... yes
checking for unistd.h... yes
checking for cc option to accept ANSI C... none needed
checking for an ANSI C-conforming const... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... no
checking for unistd.h... (cached) yes
checking for size_t... yes
checking whether struct tm is in sys/time.h or time.h... time.h
checking for regcomp... yes
checking for regerror... yes
checking for regexec... yes
checking for strdup... yes
checking for strerror... yes
checking for vsprintf... yes
checking for sigaction... yes
checking for signal... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating src/Makefile
config.status: creating src/sg.h
config.status: creating doc/Makefile
config.status: creating test/Makefile
config.status: creating test/test1.conf
config.status: creating test/test2.conf
config.status: creating samples/Makefile
config.status: creating samples/sample.conf
config.status: creating samples/squidGuard.cgi
config.status: creating samples/squidGuard-simple.cgi
config.status: creating contrib/Makefile
config.status: creating contrib/squidGuardRobot/squidGuardRobot
config.status: creating contrib/sgclean/sgclean
config.status: creating contrib/hostbyname/hostbyname
config.status: creating src/config.h
===> Building for squidGuard-1.2.0nb2
making all in squidGuard-1.2.0
making all in src
cc -I.. -I. -I. -I/usr/pkg/include/db3 -I/usr/pkg/include/db3 -DHAVE_CONFIG_H -O -I/usr/pkg/include/db3 -I/usr/pkg/include/db3 -c main.c
"main.c", line 78: syntax error before or at: char
"main.c", line 78: parameter redeclared: envp
"main.c", line 81: syntax error before or at: int
"main.c", line 123: syntax error before or at: "squidGuard emulating date %s"
"main.c", line 123: parameter not in identifier list: sgLogError
"main.c", line 123: warning: syntax error:  empty declaration
"main.c", line 124: parameter not in identifier list: globalDebugTimeDelta
"main.c", line 124: cannot initialize parameter: globalDebugTimeDelta
"main.c", line 124: undefined symbol: t
"main.c", line 124: undefined symbol: start_time
"main.c", line 124: warning: left operand of "." must be struct/union object
"main.c", line 124: non-constant initializer: op "-"
"main.c", line 125: parameter not in identifier list: start_time
"main.c", line 125: syntax error before or at: .
"main.c", line 125: parameter not in identifier list: tv_sec
"main.c", line 125: cannot initialize parameter: tv_sec
"main.c", line 125: warning: left operand of "." must be struct/union object
"main.c", line 125: warning: statement not reached
"main.c", line 126: syntax error before or at: break
"main.c", line 126: warning: syntax error:  empty declaration
"main.c", line 130: parameter not in identifier list: usage
"main.c", line 131: syntax error before or at: }
"main.c", line 132: parameter not in identifier list: globalArgv
"main.c", line 132: cannot initialize parameter: globalArgv
"main.c", line 132: undefined symbol: argv
"main.c", line 132: warning: improper pointer/integer combination: op "="
"main.c", line 132: non-constant initializer: op "NAME"
"main.c", line 133: parameter not in identifier list: globalEnvp
"main.c", line 133: cannot initialize parameter: globalEnvp
"main.c", line 133: undefined symbol: envp
"main.c", line 133: warning: improper pointer/integer combination: op "="
"main.c", line 133: non-constant initializer: op "NAME"
"main.c", line 134: parameter not in identifier list: sgSetGlobalErrorLogFile
"main.c", line 135: warning: function prototype parameters must have types
"main.c", line 135: parameter not in identifier list: sgReadConfig
"main.c", line 136: parameter not in identifier list: sgSetGlobalErrorLogFile
"main.c", line 137: syntax error before or at: "squidGuard %s started (%d.%03d)"
"main.c", line 138: parameter redeclared: start_time
"main.c", line 138: parameter not in identifier list: sgLogError
"main.c", line 139: parameter not in identifier list: globalCreateDb
"main.c", line 146: parameter not in identifier list: sgTimeElementSortEvents
"main.c", line 147: parameter not in identifier list: sgTimeNextEvent
"main.c", line 152: parameter not in identifier list: act
"main.c", line 152: syntax error before or at: .
"main.c", line 152: parameter not in identifier list: _funcptr
"main.c", line 152: parameter not in identifier list: _handler
"main.c", line 152: cannot initialize parameter: _handler
"main.c", line 152: warning: improper pointer/integer combination: op "="
"main.c", line 153: parameter not in identifier list: act
"main.c", line 153: syntax error before or at: .
"main.c", line 153: parameter not in identifier list: sa_flags
"main.c", line 153: cannot initialize parameter: sa_flags
"main.c", line 154: syntax error before or at: 1
"main.c", line 154: parameter not in identifier list: sigaction
"main.c", line 161: syntax error before or at: &
"main.c", line 161: parameter not in identifier list: gettimeofday
"main.c", line 162: parameter not in identifier list: ready_time
"main.c", line 162: syntax error before or at: .
"main.c", line 162: parameter not in identifier list: tv_sec
"main.c", line 162: cannot initialize parameter: tv_sec
"main.c", line 162: warning: left operand of "." must be struct/union object
"main.c", line 163: syntax error before or at: "squidGuard ready for requests (%d.%03d)"
"main.c", line 164: parameter redeclared: ready_time
"main.c", line 164: parameter not in identifier list: sgLogError
"main.c", line 165: parameter not in identifier list: tmp
"main.c", line 165: cannot initialize parameter: tmp
"main.c", line 166: syntax error before or at: while
"main.c", line 177: syntax error before or at: &
"main.c", line 192: parameter not in identifier list: next
"main.c", line 204: zero or negative subscript
"main.c", line 204: parameter not in identifier list: ident
"main.c", line 204: syntax error before or at: ==
"main.c", line 208: syntax error before or at: (
"main.c", line 208: parameter not in identifier list: fprintf
"main.c", line 208: parameter not in identifier list: redirect
"main.c", line 208: parameter not in identifier list: squidInfo
"main.c", line 208: syntax error before or at: .
"main.c", line 208: parameter not in identifier list: src
"main.c", line 209: parameter not in identifier list: squidInfo
"main.c", line 209: syntax error before or at: .
"main.c", line 209: parameter not in identifier list: srcDomain
"main.c", line 209: parameter not in identifier list: squidInfo
"main.c", line 209: syntax error before or at: .
"main.c", line 209: parameter not in identifier list: ident
"main.c", line 210: parameter not in identifier list: squidInfo
"main.c", line 210: syntax error before or at: .
"main.c", line 210: parameter not in identifier list: method
"main.c", line 210: warning: syntax error:  empty declaration
"main.c", line 211: warning: syntax error:  empty declaration
"main.c", line 215: parameter not in identifier list: fflush
"main.c", line 215: warning: syntax error:  empty declaration
"main.c", line 217: parameter not in identifier list: sig_hup
"main.c", line 217: syntax error before or at: sgReloadConfig
"main.c", line 217: parameter not in identifier list: sgReloadConfig
"main.c", line 218: syntax error before or at: }
"main.c", line 229: parameter not in identifier list: gettimeofday
"main.c", line 230: parameter not in identifier list: stop_time
"main.c", line 230: syntax error before or at: .
"main.c", line 230: parameter not in identifier list: tv_sec
"main.c", line 230: cannot initialize parameter: tv_sec
"main.c", line 230: warning: left operand of "." must be struct/union object
"main.c", line 231: syntax error before or at: "squidGuard stopped (%d.%03d)"
"main.c", line 231: parameter redeclared: stop_time
"main.c", line 231: parameter not in identifier list: sgLogError
"main.c", line 232: syntax error before or at: 0
"main.c", line 232: parameter not in identifier list: exit
"main.c", line 235: parameter not in identifier list: exit
"main.c", line 241: type specifier can not be used as array size expression qualifier
"main.c", line 241: warning: no explicit type given
"main.c", line 243: parameter not in identifier list: usage
"main.c", line 243: cannot recover from previous errors
cc: acomp failed for main.c
*** Error code 2

Stop.
bmake: stopped in /work/pkgbuild/www/squidGuard/work/squidGuard-1.2.0/src
*** Error code 1

Stop.
bmake: stopped in /work/pkgbuild/www/squidGuard/work/squidGuard-1.2.0
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/www/squidGuard
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/www/squidGuard
BULK> squidGuard-1.2.0nb2 was marked as broken:
-rw-r--r--   1 root     other      11919 Jul  1 07:43 .broken.html
/usr/pkg/bin/bmake deinstall
===> Deinstalling for squidGuard
BULK> Marking all packages which depend upon squidGuard-1.2.0nb2 as broken:
BULK> Build for squidGuard-1.2.0nb2 was not successful, aborting.

mirror server hosted at Truenetwork, Russian Federation.