###
### Mon Jul 5 00:30:05 CEST 2004:
### /usr/pkg/bin/bmake bulk-package for openobex-1.0.1
### Current pkg count:  2 installed packages: digest-20021220 patch-2.5.4nb2
###
BULK> Full rebuild in progress...
BULK> Cleaning package and its depends
===> Cleaning for openobex-1.0.1
===> Cleaning for libtool-base-1.5.6nb1
===> Cleaning for patch-2.5.4nb2
===> Cleaning for gmake-3.80nb3
===> Cleaning for pkg_install-info-4.5nb2
===> Cleaning for gettext-lib-0.11.5nb3
===> Cleaning for libiconv-1.9.1nb2
BULK> Removing installed packages which are not needed to build openobex-1.0.1
BULK> Keeping BULK_PREREQ: digest-20021220 (pkgtools/digest)
BULK> openobex-1.0.1 requires installed package patch-2.5.4nb2 (devel/patch) to build.
BULK> Installing packages which are required to build openobex-1.0.1.
BULK>  /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/All/libtool-base-1.5.6nb1.tgz
BULK> Required package patch-2.5.4nb2 (devel/patch) is already installed
BULK>  /usr/pkg/sbin/pkg_add -K /var/db/pkg  /packages/All/gmake-3.80nb3.tgz

===> Installing configuration/support files for libiconv-1.9.1nb2

	/usr/pkg/lib/charset.alias
BULK> Required package pkg_install-info-4.5nb2 (pkgtools/pkg_install-info) is already installed
BULK> Required package gettext-lib-0.11.5nb3 (devel/gettext-lib) is already installed
BULK> Required package libiconv-1.9.1nb2 (converters/libiconv) is already installed
BULK> Required package digest-20021220 (pkgtools/digest) is already installed
/usr/pkg/bin/bmake package (openobex-1.0.1)
===> Checking for vulnerabilities in openobex-1.0.1
=> openobex-1.0.1.tar.gz doesn't seem to exist on this system.
=> Attempting to fetch openobex-1.0.1.tar.gz from ftp://ftp.cz.NetBSD.org/pub/NetBSD/packages/distfiles/.
=> [211696 bytes]
=> Checksum OK for openobex-1.0.1.tar.gz.
work -> /pkgbuild/comms/openobex/work
===> Extracting for openobex-1.0.1
===> Required installed package libtool-base>=1.5.2nb4: libtool-base-1.5.6nb1 found
===> Required installed package gmake>=3.78: gmake-3.80nb3 found
===> Patching for openobex-1.0.1
===> Overriding tools for openobex-1.0.1
===> Buildlinking for openobex-1.0.1
===> Configuring for openobex-1.0.1
creating cache ./config.cache
checking host system type... sparc-sun-solaris2
checking target system type... sparc-sun-solaris2
checking build system type... sparc-sun-solaris2
checking host system type... sparc-sun-solaris2
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking whether build environment is sane... yes
checking whether gmake sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... missing
checking for gcc... cc
checking whether the C compiler (cc -O -R/usr/pkg/lib) works... yes
checking whether the C compiler (cc -O -R/usr/pkg/lib) is a cross-compiler... no
checking whether we are using GNU C... no
checking whether cc accepts -g... yes
checking for a BSD compatible install... /usr/ucb/install -c -o root -g root
checking for Cygwin environment... no
checking for mingw32 environment... no
checking how to run the C preprocessor... cc -E
checking for non-GNU ld... /pkgbuild/comms/openobex/work/.buildlink/bin/ld
checking if the linker (/pkgbuild/comms/openobex/work/.buildlink/bin/ld) is GNU ld... no
checking for /pkgbuild/comms/openobex/work/.buildlink/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/ccs/bin/nm -p
checking for a sed that does not truncate output... /pkgbuild/comms/openobex/work/.tools/bin/sed
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking for object suffix... o
checking for executable suffix... no
checking command to parse /usr/ccs/bin/nm -p output... ok
checking for dlfcn.h... yes
checking for ranlib... ranlib
checking for strip... strip
checking for objdir... .libs
checking for cc option to produce PIC... -KPIC
checking if cc PIC flag -KPIC works... yes
checking if cc static flag -Bstatic works... yes
checking if cc supports -c -o file.o... yes
checking if cc supports -c -o file.lo... no
checking whether the linker (/pkgbuild/comms/openobex/work/.buildlink/bin/ld) supports shared libraries... yes
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... no
checking dynamic linker characteristics... solaris2 ld.so
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
creating libtool
checking for IrDA support... no
checking for Bluetooth support... no
updating cache ./config.cache
creating ./config.status
creating Makefile
creating m4macros/Makefile
creating src/Makefile
creating doc/Makefile
creating openobex-config
creating config.h
===> Building for openobex-1.0.1
cd . \
  && CONFIG_FILES=Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating Makefile
cd . && autoheader
WARNING: `autoheader' is missing on your system.  You should only need it if
         you modified `acconfig.h' or `configure.in'.  You might want
         to install the `Autoconf' and `GNU m4' packages.  Grab them
         from any GNU archive site.
cd . \
  && CONFIG_FILES= CONFIG_HEADERS=config.h \
     /bin/ksh ./config.status
creating config.h
config.h is unchanged
/usr/pkg/bin/gmake  all-recursive
gmake[1]: Entering directory `/pkgbuild/comms/openobex/work/openobex-1.0.1'
Making all in m4macros
gmake[2]: Entering directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/m4macros'
cd .. \
  && CONFIG_FILES=m4macros/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating m4macros/Makefile
gmake[2]: Leaving directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/m4macros'
gmake[2]: Entering directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/m4macros'
gmake[2]: Nothing to be done for `all'.
gmake[2]: Leaving directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/m4macros'
Making all in src
gmake[2]: Entering directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/src'
cd .. \
  && CONFIG_FILES=src/Makefile CONFIG_HEADERS= /bin/ksh ./config.status
creating src/Makefile
gmake[2]: Leaving directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/src'
gmake[2]: Entering directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/src'
/bin/ksh ../libtool --mode=compile cc -DHAVE_CONFIG_H -I. -I. -I.. -I../src    -O2 -c obex.c
mkdir .libs
 cc -DHAVE_CONFIG_H -I. -I.. -I../src -O2 -c obex.c  -KPIC -DPIC -o .libs/obex.o
"obex_const.h", line 33: cannot find include file: 
"netbuf.h", line 40: cannot find include file: 
"obex_main.h", line 87: syntax error in macro parameters
"obex.c", line 106: warning: implicit function declaration: malloc
"obex.c", line 106: warning: improper pointer/integer combination: op "="
"obex.c", line 155: warning: implicit function declaration: free
"obex.c", line 258: warning: implicit function declaration: DEBUG
"obex.c", line 344: warning: improper pointer/integer combination: op "="
"obex.c", line 807: warning: argument #1 is incompatible with prototype:
	prototype: pointer to const char : "/usr/include/iso/string_iso.h", line 70
	argument : pointer to const unsigned char
cc: acomp failed for obex.c
gmake[2]: *** [obex.lo] Error 1
gmake[2]: Leaving directory `/pkgbuild/comms/openobex/work/openobex-1.0.1/src'
gmake[1]: *** [all-recursive] Error 1
gmake[1]: Leaving directory `/pkgbuild/comms/openobex/work/openobex-1.0.1'
gmake: *** [all-recursive-am] Error 2
*** Error code 2

Stop.
bmake: stopped in /usr/pkgsrc/comms/openobex
*** Error code 1

Stop.
bmake: stopped in /usr/pkgsrc/comms/openobex
BULK> openobex-1.0.1 was marked as broken:
-rw-r--r--   1 root     other       7787 Jul  5 00:30 .broken.html
/usr/pkg/bin/bmake deinstall
===> Deinstalling for openobex
BULK> Marking all packages which depend upon openobex-1.0.1 as broken:
BULK> marking package that requires openobex-1.0.1 as broken: obexftp-0.10.3 (comms/obexftp)
BULK> Build for openobex-1.0.1 was not successful, aborting.

mirror server hosted at Truenetwork, Russian Federation.