13.5. Removing an Old Disk

Say you have an old IDE drive on /dev/hdb. You want to remove that old disk but a lot of files are on it.

CautionBackup Your System
 

You should always backup your system before attempting a pvmove operation.

13.5.1. Distributing Old Extents to Existing Disks in Volume Group

If you have enough free extents on the other disks in the volume group, you have it easy. Simply run

# pvmove /dev/hdb
pvmove -- moving physical extents in active volume group "dev"
pvmove -- WARNING: moving of active logical volumes may cause data loss!
pvmove -- do you want to continue? [y/n] y
pvmove -- 249 extents of physical volume "/dev/hdb" successfully moved
          
This will move the allocated physical extents from /dev/hdb onto the rest of the disks in the volume group.

Notepvmove is Slow
 

Be aware that pvmove is quite slow as it has to copy the contents of a disk block by block to one or more disks. If you want more steady status reports from pvmove, use the -v flag.

13.5.1.1. Remove the unused disk

We can now remove the old IDE disk from the volume group.

# vgreduce dev /dev/hdb
vgreduce -- doing automatic backup of volume group "dev"
vgreduce -- volume group "dev" successfully reduced by physical volume:
vgreduce -- /dev/hdb
            
The drive can now be either physically removed when the machine is next powered down or reallocated to other users.

13.5.2. Distributing Old Extents to a New Replacement Disk

If you do not have enough free physical extents to distribute the old physical extents to, you will have to add a disk to the volume group and move the extents to it.

13.5.2.1. Prepare the disk

First, you need to pvcreate the new disk to make it available to LVM. In this recipe we show that you don't need to partition a disk to be able to use it.

# pvcreate /dev/sdf
pvcreate -- physical volume "/dev/sdf" successfully created
            

13.5.2.2. Add it to the volume group

As developers use a lot of disk space this is a good volume group to add it into.

# vgextend dev /dev/sdf
vgextend -- INFO: maximum logical volume size is 255.99 Gigabyte
vgextend -- doing automatic backup of volume group "dev"
vgextend -- volume group "dev" successfully extended
            

13.5.2.3. Move the data

Next we move the data from the old disk onto the new one. Note that it is not necessary to unmount the file system before doing this. Although it is *highly* recommended that you do a full backup before attempting this operation in case of a power outage or some other problem that may interrupt it. The pvmove command can take a considerable amount of time to complete and it also exacts a performance hit on the two volumes so, although it isn't necessary, it is advisable to do this when the volumes are not too busy.

# pvmove /dev/hdb /dev/sdf
pvmove -- moving physical extents in active volume group "dev"
pvmove -- WARNING: moving of active logical volumes may cause data loss!
pvmove -- do you want to continue? [y/n] y
pvmove -- 249 extents of physical volume "/dev/hdb" successfully moved
            

13.5.2.4. Remove the unused disk

We can now remove the old IDE disk from the volume group.

# vgreduce dev /dev/hdb
vgreduce -- doing automatic backup of volume group "dev"
vgreduce -- volume group "dev" successfully reduced by physical volume:
vgreduce -- /dev/hdb
            
The drive can now be either physically removed when the machine is next powered down or reallocated to some other users.

mirror server hosted at Truenetwork, Russian Federation.