Next
Previous
Contents
While the VMELinux driver should work with any PCI based design, the following boards have actually run our software.
- This XyCom board is compatible with the standard VMELinux kernel driver package from
VMELinux Project
- A prepared kernel will be available soon. It will be based on the newest version of the Linux kernel and will include appropriate drivers for the on board NE2100 Ethernet interface. Check the website for details.
- This XyCom board is compatible with the standard VMELinux kernel driver package from
VMELinux Project
- A prepared kernel will be available soon. It will be based on the newest version of the Linux kernel and will include appropriate drivers for the on board AHA2940/AIC7000 SCSI and 82558 Intel EtherExpress Ethernet peripherals. Check the website for details.
- This board is compatible with the standard VMELinux kernel driver package from
VMELinux Project
- A prepared kernel will be available soon. It will be based on the newest version of the Linux kernel and will include appropriate drivers for the on board SCSI and Tulip Ethernet peripherals. Check the website for details.
- This board is compatible with the standard VMELinux kernel driver package from
VMELinux Project
- A prepared kernel will be available soon. It will be based on the newest version of the Linux kernel and will include appropriate drivers for PCNET Ethernet peripheral. Check the website for details.
- The VP7 has a nice feature which performs the BOOTP protocol without need of a bootrom or similar modification. However, you must ask SBS for an updated BIOS with this modification.
- An independent engineer finds this board is compatible with the standard VMELinux kernel driver package from
VMELinux Project
If you do not see VMELinux support for your board let us know. Maybe the manufacture will lend us a board for development.
Next
Previous
Contents