This is a purely informative rendering of an RFC that includes verified errata. This rendering may not be used as a reference.

The following 'Verified' errata have been incorporated in this document: EID 607
Network Working Group                                       D. Crockford
Request for Comments: 4627                                      JSON.org
Category: Informational                                        July 2006


 The application/json Media Type for JavaScript Object Notation (JSON)

Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   JavaScript Object Notation (JSON) is a lightweight, text-based,
   language-independent data interchange format.  It was derived from
   the ECMAScript Programming Language Standard.  JSON defines a small
   set of formatting rules for the portable representation of structured
   data.

1.  Introduction

   JavaScript Object Notation (JSON) is a text format for the
   serialization of structured data.  It is derived from the object
   literals of JavaScript, as defined in the ECMAScript Programming
   Language Standard, Third Edition [ECMA].

   JSON can represent four primitive types (strings, numbers, booleans,
   and null) and two structured types (objects and arrays).

   A string is a sequence of zero or more Unicode characters [UNICODE].

   An object is an unordered collection of zero or more name/value
   pairs, where a name is a string and a value is a string, number,
   boolean, null, object, or array.

   An array is an ordered sequence of zero or more values.

   The terms "object" and "array" come from the conventions of
   JavaScript.

   JSON's design goals were for it to be minimal, portable, textual, and
   a subset of JavaScript.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   The grammatical rules in this document are to be interpreted as
   described in [RFC4234].

2.  JSON Grammar

   A JSON text is a sequence of tokens.  The set of tokens includes six
   structural characters, strings, numbers, and three literal names.

   A JSON text is a serialized object or array.

      JSON-text = object / array

   These are the six structural characters:

      begin-array     = ws %x5B ws  ; [ left square bracket

      begin-object    = ws %x7B ws  ; { left curly bracket

      end-array       = ws %x5D ws  ; ] right square bracket

      end-object      = ws %x7D ws  ; } right curly bracket

      name-separator  = ws %x3A ws  ; : colon

      value-separator = ws %x2C ws  ; , comma

   Insignificant whitespace is allowed before or after any of the six
   structural characters.

      ws = *(
                %x20 /              ; Space
                %x09 /              ; Horizontal tab
                %x0A /              ; Line feed or New line
                %x0D                ; Carriage return
            )

2.1.  Values

   A JSON value MUST be an object, array, number, or string, or one of
   the following three literal names:

      false null true

   The literal names MUST be lowercase.  No other literal names are
   allowed.

         value = false / null / true / object / array / number / string

         false = %x66.61.6c.73.65   ; false

         null  = %x6e.75.6c.6c      ; null

         true  = %x74.72.75.65      ; true

2.2.  Objects

   An object structure is represented as a pair of curly brackets
   surrounding zero or more name/value pairs (or members).  A name is a
   string.  A single colon comes after each name, separating the name
   from the value.  A single comma separates a value from a following
   name.  The names within an object SHOULD be unique.

            object = begin-object [ member *( value-separator member ) ] 
               end-object

EID 607 (Verified) is as follows:

Section: 2.2

Original Text:

      object = begin-object [ member *( value-separator member ) ]
      end-object

Corrected Text:

      object = begin-object [ member *( value-separator member ) ]
               end-object
Notes:
(edited by Alexey): Wrong indentation on the second line of the ABNF production, otherwise this is not legal ABNF.
member = string name-separator value 2.3. Arrays An array structure is represented as square brackets surrounding zero or more values (or elements). Elements are separated by commas. array = begin-array [ value *( value-separator value ) ] end-array 2.4. Numbers The representation of numbers is similar to that used in most programming languages. A number contains an integer component that may be prefixed with an optional minus sign, which may be followed by a fraction part and/or an exponent part. Octal and hex forms are not allowed. Leading zeros are not allowed. A fraction part is a decimal point followed by one or more digits. An exponent part begins with the letter E in upper or lowercase, which may be followed by a plus or minus sign. The E and optional sign are followed by one or more digits. Numeric values that cannot be represented as sequences of digits (such as Infinity and NaN) are not permitted. number = [ minus ] int [ frac ] [ exp ] decimal-point = %x2E ; . digit1-9 = %x31-39 ; 1-9 e = %x65 / %x45 ; e E exp = e [ minus / plus ] 1*DIGIT frac = decimal-point 1*DIGIT int = zero / ( digit1-9 *DIGIT ) minus = %x2D ; - plus = %x2B ; + zero = %x30 ; 0 2.5. Strings The representation of strings is similar to conventions used in the C family of programming languages. A string begins and ends with quotation marks. All Unicode characters may be placed within the quotation marks except for the characters that must be escaped: quotation mark, reverse solidus, and the control characters (U+0000 through U+001F). Any character may be escaped. If the character is in the Basic Multilingual Plane (U+0000 through U+FFFF), then it may be represented as a six-character sequence: a reverse solidus, followed by the lowercase letter u, followed by four hexadecimal digits that encode the character's code point. The hexadecimal letters A though F can be upper or lowercase. So, for example, a string containing only a single reverse solidus character may be represented as "\u005C". Alternatively, there are two-character sequence escape representations of some popular characters. So, for example, a string containing only a single reverse solidus character may be represented more compactly as "\\". To escape an extended character that is not in the Basic Multilingual Plane, the character is represented as a twelve-character sequence, encoding the UTF-16 surrogate pair. So, for example, a string containing only the G clef character (U+1D11E) may be represented as "\uD834\uDD1E". string = quotation-mark *char quotation-mark char = unescaped / escape ( %x22 / ; " quotation mark U+0022 %x5C / ; \ reverse solidus U+005C %x2F / ; / solidus U+002F %x62 / ; b backspace U+0008 %x66 / ; f form feed U+000C %x6E / ; n line feed U+000A %x72 / ; r carriage return U+000D %x74 / ; t tab U+0009 %x75 4HEXDIG ) ; uXXXX U+XXXX escape = %x5C ; \ quotation-mark = %x22 ; " unescaped = %x20-21 / %x23-5B / %x5D-10FFFF 3. Encoding JSON text SHALL be encoded in Unicode. The default encoding is UTF-8. Since the first two characters of a JSON text will always be ASCII characters [RFC0020], it is possible to determine whether an octet stream is UTF-8, UTF-16 (BE or LE), or UTF-32 (BE or LE) by looking at the pattern of nulls in the first four octets. 00 00 00 xx UTF-32BE 00 xx 00 xx UTF-16BE xx 00 00 00 UTF-32LE xx 00 xx 00 UTF-16LE xx xx xx xx UTF-8 4. Parsers A JSON parser transforms a JSON text into another representation. A JSON parser MUST accept all texts that conform to the JSON grammar. A JSON parser MAY accept non-JSON forms or extensions. An implementation may set limits on the size of texts that it accepts. An implementation may set limits on the maximum depth of nesting. An implementation may set limits on the range of numbers. An implementation may set limits on the length and character contents of strings. 5. Generators A JSON generator produces JSON text. The resulting text MUST strictly conform to the JSON grammar. 6. IANA Considerations The MIME media type for JSON text is application/json. Type name: application Subtype name: json Required parameters: n/a Optional parameters: n/a Encoding considerations: 8bit if UTF-8; binary if UTF-16 or UTF-32 JSON may be represented using UTF-8, UTF-16, or UTF-32. When JSON is written in UTF-8, JSON is 8bit compatible. When JSON is written in UTF-16 or UTF-32, the binary content-transfer-encoding must be used. Security considerations: Generally there are security issues with scripting languages. JSON is a subset of JavaScript, but it is a safe subset that excludes assignment and invocation. A JSON text can be safely passed into JavaScript's eval() function (which compiles and executes a string) if all the characters not enclosed in strings are in the set of characters that form JSON tokens. This can be quickly determined in JavaScript with two regular expressions and calls to the test and replace methods. var my_JSON_object = !(/[^,:{}\[\]0-9.\-+Eaeflnr-u \n\r\t]/.test( text.replace(/"(\\.|[^"\\])*"/g, ''))) && eval('(' + text + ')'); Interoperability considerations: n/a Published specification: RFC 4627 Applications that use this media type: JSON has been used to exchange data between applications written in all of these programming languages: ActionScript, C, C#, ColdFusion, Common Lisp, E, Erlang, Java, JavaScript, Lua, Objective CAML, Perl, PHP, Python, Rebol, Ruby, and Scheme. Additional information: Magic number(s): n/a File extension(s): .json Macintosh file type code(s): TEXT Person & email address to contact for further information: Douglas Crockford douglas@crockford.com Intended usage: COMMON Restrictions on usage: none Author: Douglas Crockford douglas@crockford.com Change controller: Douglas Crockford douglas@crockford.com 7. Security Considerations See Security Considerations in Section 6. 8. Examples This is a JSON object: { "Image": { "Width": 800, "Height": 600, "Title": "View from 15th Floor", "Thumbnail": { "Url": "http://www.example.com/image/481989943", "Height": 125, "Width": "100" }, "IDs": [116, 943, 234, 38793] } } Its Image member is an object whose Thumbnail member is an object and whose IDs member is an array of numbers. This is a JSON array containing two objects: [ { "precision": "zip", "Latitude": 37.7668, "Longitude": -122.3959, "Address": "", "City": "SAN FRANCISCO", "State": "CA", "Zip": "94107", "Country": "US" }, { "precision": "zip", "Latitude": 37.371991, "Longitude": -122.026020, "Address": "", "City": "SUNNYVALE", "State": "CA", "Zip": "94085", "Country": "US" } ] 9. References 9.1. Normative References [ECMA] European Computer Manufacturers Association, "ECMAScript Language Specification 3rd Edition", December 1999, <http://www.ecma-international.org/publications/files/ ecma-st/ECMA-262.pdf>. [RFC0020] Cerf, V., "ASCII format for network interchange", RFC 20, October 1969. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC4234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", RFC 4234, October 2005. [UNICODE] The Unicode Consortium, "The Unicode Standard Version 4.0", 2003, <http://www.unicode.org/versions/Unicode4.1.0/>. Author's Address Douglas Crockford JSON.org EMail: douglas@crockford.com Full Copyright Statement Copyright (C) The Internet Society (2006). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Acknowledgement Funding for the RFC Editor function is provided by the IETF Administrative Support Activity (IASA).

mirror server hosted at Truenetwork, Russian Federation.