Network Working Group                                      S. De Cnodder
Request for Comments: 4672                                       Alcatel
Category: Informational                                       N. Jonnala
                                                                M. Chiba
                                                     Cisco Systems, Inc.
                                                          September 2006


                RADIUS Dynamic Authorization Client MIB

Status of This Memo

   This memo provides information for the Internet community.  It does
   not specify an Internet standard of any kind.  Distribution of this
   memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2006).

Abstract

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes the Remote Authentication Dial-In User
   Service (RADIUS) (RFC2865) Dynamic Authorization Client (DAC)
   functions that support the dynamic authorization extensions as
   defined in RFC 3576.

Table of Contents

   1. Introduction ....................................................2
      1.1. Requirements Notation ......................................2
      1.2. Terminology ................................................2
   2. The Internet-Standard Management Framework ......................3
   3. Overview ........................................................3
   4. RADIUS Dynamic Authorization Client MIB Definitions .............3
   5. Security Considerations ........................................19
   6. IANA Considerations ............................................20
   7. Acknowledgements ...............................................20
   8. References .....................................................21
      8.1. Normative References ......................................21
      8.2. Informative References ....................................21








De Cnodder, et al.           Informational                      [Page 1]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


1.  Introduction

   This memo defines a portion of the Management Information Base (MIB)
   for use with network management protocols in the Internet community.
   In particular, it describes the Remote Authentication Dial-In User
   Service (RADIUS) [RFC2865] Dynamic Authorization Client (DAC)
   functions that support the dynamic authorization extensions as
   defined in RFC 3576.

   It is becoming increasingly important to support Dynamic
   Authorization extensions on the network access server (NAS) devices
   to handle the Disconnect and Change-of-Authorization (CoA) messages,
   as described in [RFC3576].  As a result, the effective management of
   RADIUS Dynamic Authorization entities is of considerable importance.
   This RADIUS Dynamic Authorization Client MIB complements the managed
   objects used for managing RADIUS authentication and accounting
   servers, as described in [RFC4669] and [RFC4671], respectively.

1.1.  Requirements Notation

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  Terminology

   Dynamic Authorization Server (DAS)

   The component that resides on the NAS that processes the Disconnect
   and Change-of-Authorization (CoA) Request packets [RFC3576] sent by
   the Dynamic Authorization Client.

   Dynamic Authorization Client (DAC)

   The component that sends Disconnect and CoA-Request packets to the
   Dynamic Authorization Server.  Although this component often resides
   on the RADIUS server, it is also possible for this component to be
   located on a separate host, such as a Rating Engine.

   Dynamic Authorization Server Port

   The UDP port on which the Dynamic Authorization Server listens for
   the Disconnect and CoA requests sent by the Dynamic Authorization
   Client.







De Cnodder, et al.           Informational                      [Page 2]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


2.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579], and STD 58, RFC 2580
   [RFC2580].

3.  Overview

   "Dynamic Authorization Extensions to RADIUS" [RFC3576] defines the
   operation of Disconnect-Request, Disconnect-ACK, Disconnect-NAK,
   CoA-Request, CoA-ACK, and CoA-NAK packets.  [RFC4673] defines the
   Dynamic Authorization Server MIB and the relationship with other MIB
   modules.  This MIB module for the Dynamic Authorization Client
   contains the following:

   1.  Two scalar objects

   2.  One Dynamic Authorization Server table.  This table contains one
       row for each DAS with which the DAC shares a secret.

4.  RADIUS Dynamic Authorization Client MIB Definitions

   RADIUS-DYNAUTH-CLIENT-MIB DEFINITIONS ::= BEGIN

   IMPORTS
          MODULE-IDENTITY, OBJECT-TYPE,
          Counter32, Gauge32, Integer32,
          mib-2, TimeTicks    FROM SNMPv2-SMI         -- [RFC2578]
          SnmpAdminString     FROM SNMP-FRAMEWORK-MIB -- [RFC3411]
          InetAddressType, InetAddress,
          InetPortNumber      FROM INET-ADDRESS-MIB   -- [RFC4001]
          MODULE-COMPLIANCE,
          OBJECT-GROUP        FROM SNMPv2-CONF;       -- [RFC2580]

   radiusDynAuthClientMIB MODULE-IDENTITY
          LAST-UPDATED "200608290000Z" -- 29 August 2006
          ORGANIZATION "IETF RADEXT Working Group"
          CONTACT-INFO
                 " Stefaan De Cnodder



De Cnodder, et al.           Informational                      [Page 3]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


                   Alcatel
                   Francis Wellesplein 1
                   B-2018 Antwerp
                   Belgium

                   Phone: +32 3 240 85 15
                   EMail: stefaan.de_cnodder@alcatel.be

                   Nagi Reddy Jonnala
                   Cisco Systems, Inc.
                   Divyasree Chambers, B Wing,
                   O'Shaugnessy Road,
                   Bangalore-560027, India.

                   Phone: +91 94487 60828
                   EMail: njonnala@cisco.com

                   Murtaza Chiba
                   Cisco Systems, Inc.
                   170 West Tasman Dr.
                   San Jose CA, 95134

                   Phone: +1 408 525 7198
                   EMail: mchiba@cisco.com "
          DESCRIPTION
              "The MIB module for entities implementing the client
               side of the Dynamic Authorization Extensions to the
               Remote Authentication Dial-In User Service (RADIUS)
               protocol. Copyright (C) The Internet Society (2006).
               Initial version as published in RFC 4672;
               for full legal notices see the RFC itself."

          REVISION "200609290000Z" -- 29 August 2006
          DESCRIPTION "Initial version as published in RFC 4672"
          ::= { mib-2 145 }

   radiusDynAuthClientMIBObjects OBJECT IDENTIFIER ::=
                                         { radiusDynAuthClientMIB 1 }

   radiusDynAuthClientScalars    OBJECT IDENTIFIER ::=
                                  { radiusDynAuthClientMIBObjects 1 }

   radiusDynAuthClientDisconInvalidServerAddresses OBJECT-TYPE
          SYNTAX Counter32
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of Disconnect-Ack and Disconnect-NAK packets



De Cnodder, et al.           Informational                      [Page 4]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


                 received from unknown addresses.  This counter may
                 experience a discontinuity when the DAC module
                 (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          ::= { radiusDynAuthClientScalars 1 }

   radiusDynAuthClientCoAInvalidServerAddresses OBJECT-TYPE
          SYNTAX Counter32
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The number of CoA-Ack and CoA-NAK packets received from
                 unknown addresses.  Disconnect-NAK packets received
                 from unknown addresses.  This counter may experience a
                 discontinuity when the DAC module (re)starts, as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          ::= { radiusDynAuthClientScalars 2 }

   radiusDynAuthServerTable OBJECT-TYPE
          SYNTAX SEQUENCE OF RadiusDynAuthServerEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "The (conceptual) table listing the RADIUS Dynamic
                 Authorization Servers with which the client shares a
                 secret."
          ::= { radiusDynAuthClientMIBObjects 2 }

   radiusDynAuthServerEntry OBJECT-TYPE
          SYNTAX     RadiusDynAuthServerEntry
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "An entry (conceptual row) representing one Dynamic
                 Authorization Server with which the client shares a
                 secret."
          INDEX      { radiusDynAuthServerIndex }
          ::= { radiusDynAuthServerTable 1 }

   RadiusDynAuthServerEntry ::= SEQUENCE {
          radiusDynAuthServerIndex                     Integer32,
          radiusDynAuthServerAddressType               InetAddressType,
          radiusDynAuthServerAddress                   InetAddress,
          radiusDynAuthServerClientPortNumber          InetPortNumber,
          radiusDynAuthServerID                        SnmpAdminString,
          radiusDynAuthClientRoundTripTime             TimeTicks,
          radiusDynAuthClientDisconRequests            Counter32,



De Cnodder, et al.           Informational                      [Page 5]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          radiusDynAuthClientDisconAuthOnlyRequests    Counter32,
          radiusDynAuthClientDisconRetransmissions     Counter32,
          radiusDynAuthClientDisconAcks                Counter32,
          radiusDynAuthClientDisconNaks                Counter32,
          radiusDynAuthClientDisconNakAuthOnlyRequest  Counter32,
          radiusDynAuthClientDisconNakSessNoContext    Counter32,
          radiusDynAuthClientMalformedDisconResponses  Counter32,
          radiusDynAuthClientDisconBadAuthenticators   Counter32,
          radiusDynAuthClientDisconPendingRequests     Gauge32,
          radiusDynAuthClientDisconTimeouts            Counter32,
          radiusDynAuthClientDisconPacketsDropped      Counter32,
          radiusDynAuthClientCoARequests               Counter32,
          radiusDynAuthClientCoAAuthOnlyRequest        Counter32,
          radiusDynAuthClientCoARetransmissions        Counter32,
          radiusDynAuthClientCoAAcks                   Counter32,
          radiusDynAuthClientCoANaks                   Counter32,
          radiusDynAuthClientCoANakAuthOnlyRequest     Counter32,
          radiusDynAuthClientCoANakSessNoContext       Counter32,
          radiusDynAuthClientMalformedCoAResponses     Counter32,
          radiusDynAuthClientCoABadAuthenticators      Counter32,
          radiusDynAuthClientCoAPendingRequests        Gauge32,
          radiusDynAuthClientCoATimeouts               Counter32,
          radiusDynAuthClientCoAPacketsDropped         Counter32,
          radiusDynAuthClientUnknownTypes              Counter32,
          radiusDynAuthClientCounterDiscontinuity      TimeTicks
   }


   radiusDynAuthServerIndex OBJECT-TYPE
          SYNTAX     Integer32 (1..2147483647)
          MAX-ACCESS not-accessible
          STATUS     current
          DESCRIPTION
                "A number uniquely identifying each RADIUS Dynamic
                 Authorization Server with which this Dynamic
                 Authorization Client communicates.  This number is
                 allocated by the agent implementing this MIB module
                 and is unique in this context."
          ::= { radiusDynAuthServerEntry 1 }

   radiusDynAuthServerAddressType OBJECT-TYPE
          SYNTAX     InetAddressType
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The type of IP address of the RADIUS Dynamic
                 Authorization Server referred to in this table entry."
          ::= { radiusDynAuthServerEntry 2 }



De Cnodder, et al.           Informational                      [Page 6]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


   radiusDynAuthServerAddress OBJECT-TYPE
          SYNTAX     InetAddress
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The IP address value of the RADIUS Dynamic
                 Authorization Server referred to in this table entry
                 using the version neutral IP address format.  The type
                 of this address is determined by the value of the
                 radiusDynAuthServerAddressType object."
          ::= { radiusDynAuthServerEntry 3 }

   radiusDynAuthServerClientPortNumber OBJECT-TYPE
          SYNTAX     InetPortNumber (1..65535)
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The UDP destination port that the RADIUS Dynamic
                 Authorization Client is using to send requests to this
                 server.  The value zero is invalid."
          ::= { radiusDynAuthServerEntry 4 }


   radiusDynAuthServerID OBJECT-TYPE
          SYNTAX     SnmpAdminString
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The NAS-Identifier of the RADIUS Dynamic Authorization
                 Server referred to in this table entry.  This is not
                 necessarily the same as sysName in MIB II."
          REFERENCE
                "RFC 2865, Section 5.32, NAS-Identifier."
          ::= { radiusDynAuthServerEntry 5 }

   radiusDynAuthClientRoundTripTime OBJECT-TYPE
          SYNTAX     TimeTicks
          UNITS      "hundredths of a second"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The time interval (in hundredths of a second) between
                 the most recent Disconnect or CoA request and the
                 receipt of the corresponding Disconnect or CoA reply.
                 A value of zero is returned if no reply has been
                 received yet from this server."
          ::= { radiusDynAuthServerEntry 6 }




De Cnodder, et al.           Informational                      [Page 7]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


   radiusDynAuthClientDisconRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests sent
                 to this Dynamic Authorization Server.  This also
                 includes the RADIUS Disconnect-Requests that have a
                 Service-Type attribute with value 'Authorize Only'.
                 Disconnect-NAK packets received from unknown addresses.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 7 }

   radiusDynAuthClientDisconAuthOnlyRequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-Requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Server.
                 Disconnect-NAK packets received from unknown addresses.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 8 }

   radiusDynAuthClientDisconRetransmissions OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "retransmissions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-request packets
                 retransmitted to this RADIUS Dynamic Authorization
                 Server.  Disconnect-NAK packets received from unknown
                 addresses.  This counter may experience a discontinuity
                 when the DAC module (re)starts, as indicated by the
                 value of radiusDynAuthClientCounterDiscontinuity."
          REFERENCE



De Cnodder, et al.           Informational                      [Page 8]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 9 }

   radiusDynAuthClientDisconAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-ACK packets
                 received from this Dynamic Authorization Server.  This
                 counter may experience a discontinuity when the DAC
                 module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 10 }

   radiusDynAuthClientDisconNaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 received from this Dynamic Authorization Server.
                 This includes the RADIUS Disconnect-NAK packets
                 received with a Service-Type attribute with value
                 'Authorize Only' and the RADIUS Disconnect-NAK
                 packets received if no session context was found.  This
                 counter may experience a discontinuity when the DAC
                 module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 11 }

   radiusDynAuthClientDisconNakAuthOnlyRequest OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 that include a Service-Type attribute with value
                 'Authorize Only' received from this Dynamic
                 Authorization Server.  This counter may experience a
                 discontinuity when the DAC module (re)starts, as



De Cnodder, et al.           Informational                      [Page 9]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 12 }

   radiusDynAuthClientDisconNakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-NAK packets
                 received from this Dynamic Authorization Server
                 because no session context was found; i.e., it
                 includes an Error-Cause attribute with value 503
                 ('Session Context Not Found').  This counter may
                 experience a discontinuity when the DAC module
                 (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 13 }

   radiusDynAuthClientMalformedDisconResponses OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of malformed RADIUS Disconnect-Ack and
                 Disconnect-NAK packets received from this Dynamic
                 Authorization Server.  Bad authenticators and unknown
                 types are not included as malformed Disconnect-Ack and
                 Disconnect-NAK packets.  This counter may experience a
                 discontinuity when the DAC module (re)starts, as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 14 }

   radiusDynAuthClientDisconBadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current



De Cnodder, et al.           Informational                     [Page 10]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          DESCRIPTION
                "The number of RADIUS Disconnect-Ack and Disconnect-NAK
                 packets that contained invalid Authenticator field
                 received from this Dynamic Authorization Server.  This
                 counter may experience a discontinuity when the DAC
                 module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 15 }

   radiusDynAuthClientDisconPendingRequests OBJECT-TYPE
          SYNTAX     Gauge32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS Disconnect-request packets
                 destined for this server that have not yet timed out
                 or received a response.  This variable is incremented
                 when an Disconnect-Request is sent and decremented
                 due to receipt of a Disconnect-Ack, a Disconnect-NAK,
                 a timeout, or a retransmission."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 16 }

   radiusDynAuthClientDisconTimeouts OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "timeouts"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of Disconnect request timeouts to this
                 server.  After a timeout, the client may retry to the
                 same server or give up.  A retry to the same server is
                 counted as a retransmit and as a timeout.  A send
                 to a different server is counted as a
                 Disconnect-Request and as a timeout.  This counter
                 may experience a discontinuity when the DAC module
                 (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM)."
          ::= { radiusDynAuthServerEntry 17 }

   radiusDynAuthClientDisconPacketsDropped OBJECT-TYPE



De Cnodder, et al.           Informational                     [Page 11]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming Disconnect-Ack and
                 Disconnect-NAK packets from this Dynamic Authorization
                 Server silently discarded by the client application for
                 some reason other than malformed, bad authenticators,
                 or unknown types.  This counter may experience a
                 discontinuity when the DAC module (re)starts, as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.1, Disconnect Messages (DM), and
                 Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 18 }

   radiusDynAuthClientCoARequests OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Requests sent to this
                 Dynamic Authorization Server.  This also includes
                 CoA requests that have a Service-Type attribute
                 with value 'Authorize Only'.  This counter may
                 experience a discontinuity when the DAC module
                 (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 19 }

   radiusDynAuthClientCoAAuthOnlyRequest OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-requests that include a
                 Service-Type attribute with value 'Authorize Only'
                 sent to this Dynamic Authorization Client.  This
                 counter may experience a discontinuity when the DAC
                 module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."



De Cnodder, et al.           Informational                     [Page 12]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 20 }

   radiusDynAuthClientCoARetransmissions OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "retransmissions"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-request packets
                 retransmitted to this RADIUS Dynamic Authorization
                 Server.  This counter may experience a discontinuity
                 when the DAC module (re)starts, as indicated by the
                 value of radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 21 }

   radiusDynAuthClientCoAAcks  OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-ACK packets received from
                 this Dynamic Authorization Server.  This counter may
                 experience a discontinuity when the DAC module
                 (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 22 }

   radiusDynAuthClientCoANaks OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets received from
                 this Dynamic Authorization Server.  This includes the
                 RADIUS CoA-NAK packets received with a Service-Type
                 attribute with value 'Authorize Only' and the RADIUS
                 CoA-NAK packets received because no session context



De Cnodder, et al.           Informational                     [Page 13]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


                 was found.  This counter may experience a discontinuity
                 when the DAC module (re)starts, as indicated by the
                 value of radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 23 }

   radiusDynAuthClientCoANakAuthOnlyRequest OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets that include a
                 Service-Type attribute with value 'Authorize Only'
                 received from this Dynamic Authorization Server.  This
                 counter may experience a discontinuity when the DAC
                 module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 24 }

   radiusDynAuthClientCoANakSessNoContext OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-NAK packets received from
                 this Dynamic Authorization Server because no session
                 context was found; i.e., it includes an Error-Cause
                 attribute with value 503 ('Session Context Not Found').
                 This counter may experience a discontinuity when the
                 DAC module (re)starts as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 25 }

   radiusDynAuthClientMalformedCoAResponses OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current



De Cnodder, et al.           Informational                     [Page 14]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          DESCRIPTION
                "The number of malformed RADIUS CoA-Ack and CoA-NAK
                 packets received from this Dynamic Authorization
                 Server.  Bad authenticators and unknown types are
                 not included as malformed CoA-Ack and CoA-NAK packets.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 26 }

   radiusDynAuthClientCoABadAuthenticators OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-Ack and CoA-NAK packets
                 that contained invalid Authenticator field
                 received from this Dynamic Authorization Server.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 27 }

   radiusDynAuthClientCoAPendingRequests OBJECT-TYPE
          SYNTAX     Gauge32
          UNITS      "requests"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of RADIUS CoA-request packets destined for
                 this server that have not yet timed out or received a
                 response.  This variable is incremented when an
                 CoA-Request is sent and decremented due to receipt of
                 a CoA-Ack, a CoA-NAK, or a timeout, or a
                 retransmission."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 28 }

   radiusDynAuthClientCoATimeouts OBJECT-TYPE



De Cnodder, et al.           Informational                     [Page 15]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          SYNTAX     Counter32
          UNITS      "timeouts"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of CoA request timeouts to this server.
                 After a timeout, the client may retry to the same
                 server or give up.  A retry to the same server is
                 counted as a retransmit and as a timeout.  A send to
                 a different server is counted as a CoA-Request and
                 as a timeout.  This counter may experience a
                 discontinuity when the DAC module (re)starts, as
                 indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA)."
          ::= { radiusDynAuthServerEntry 29 }

   radiusDynAuthClientCoAPacketsDropped OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming CoA-Ack and CoA-NAK from this
                 Dynamic Authorization Server silently discarded by the
                 client application for some reason other than
                 malformed, bad authenticators, or unknown types.  This
                 counter may experience a discontinuity when the DAC
                 module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."
          REFERENCE
                "RFC 3576, Section 2.2, Change-of-Authorization
                 Messages (CoA), and Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 30 }

   radiusDynAuthClientUnknownTypes OBJECT-TYPE
          SYNTAX     Counter32
          UNITS      "replies"
          MAX-ACCESS read-only
          STATUS     current
          DESCRIPTION
                "The number of incoming packets of unknown types
                 that were received on the Dynamic Authorization port.
                 This counter may experience a discontinuity when the
                 DAC module (re)starts, as indicated by the value of
                 radiusDynAuthClientCounterDiscontinuity."



De Cnodder, et al.           Informational                     [Page 16]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          REFERENCE
                "RFC 3576, Section 2.3, Packet Format."
          ::= { radiusDynAuthServerEntry 31 }

   radiusDynAuthClientCounterDiscontinuity OBJECT-TYPE
          SYNTAX TimeTicks
          UNITS  "hundredths of a second"
          MAX-ACCESS read-only
          STATUS current
          DESCRIPTION
                "The time (in hundredths of a second) since the
                 last counter discontinuity.  A discontinuity may
                 be the result of a reinitialization of the DAC
                 module within the managed entity."
          ::= { radiusDynAuthServerEntry 32 }


   -- conformance information

   radiusDynAuthClientMIBConformance
          OBJECT IDENTIFIER ::= { radiusDynAuthClientMIB 2 }
   radiusDynAuthClientMIBCompliances
          OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 1 }
   radiusDynAuthClientMIBGroups
          OBJECT IDENTIFIER ::= { radiusDynAuthClientMIBConformance 2 }
   -- compliance statements

   radiusDynAuthClientMIBCompliance MODULE-COMPLIANCE
          STATUS  current
          DESCRIPTION
                "The compliance statement for entities implementing
                 the RADIUS Dynamic Authorization Client.
                 Implementation of this module is for entities that
                 support IPv4 and/or IPv6."
          MODULE  -- this module
          MANDATORY-GROUPS { radiusDynAuthClientMIBGroup }

          OBJECT             radiusDynAuthServerAddressType
          SYNTAX             InetAddressType { ipv4(1), ipv6(2) }
          DESCRIPTION
              "An implementation is only required to support IPv4 and
               globally unique IPv6 addresses."

          OBJECT             radiusDynAuthServerAddress
          SYNTAX             InetAddress (SIZE(4|16))
          DESCRIPTION
              "An implementation is only required to support IPv4 and
               globally unique IPv6 addresses."



De Cnodder, et al.           Informational                     [Page 17]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          GROUP              radiusDynAuthClientAuthOnlyGroup
          DESCRIPTION
                "Only required for Dynamic Authorization Clients that
                 are supporting Service-Type attributes with value
                 'Authorize-Only'."


          GROUP              radiusDynAuthClientNoSessGroup
          DESCRIPTION
                "This group is not required if the Dynamic
                 Authorization Server cannot easily determine whether
                 a session exists (e.g., in case of a RADIUS
                 proxy)."

          ::= { radiusDynAuthClientMIBCompliances 1 }

   -- units of conformance

   radiusDynAuthClientMIBGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthClientDisconInvalidServerAddresses,
                    radiusDynAuthClientCoAInvalidServerAddresses,
                    radiusDynAuthServerAddressType,
                    radiusDynAuthServerAddress,
                    radiusDynAuthServerClientPortNumber,
                    radiusDynAuthServerID,
                    radiusDynAuthClientRoundTripTime,
                    radiusDynAuthClientDisconRequests,
                    radiusDynAuthClientDisconRetransmissions,
                    radiusDynAuthClientDisconAcks,
                    radiusDynAuthClientDisconNaks,
                    radiusDynAuthClientMalformedDisconResponses,
                    radiusDynAuthClientDisconBadAuthenticators,
                    radiusDynAuthClientDisconPendingRequests,
                    radiusDynAuthClientDisconTimeouts,
                    radiusDynAuthClientDisconPacketsDropped,
                    radiusDynAuthClientCoARequests,
                    radiusDynAuthClientCoARetransmissions,
                    radiusDynAuthClientCoAAcks,
                    radiusDynAuthClientCoANaks,
                    radiusDynAuthClientMalformedCoAResponses,
                    radiusDynAuthClientCoABadAuthenticators,
                    radiusDynAuthClientCoAPendingRequests,
                    radiusDynAuthClientCoATimeouts,
                    radiusDynAuthClientCoAPacketsDropped,
                    radiusDynAuthClientUnknownTypes,
                    radiusDynAuthClientCounterDiscontinuity
                  }
          STATUS  current



De Cnodder, et al.           Informational                     [Page 18]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


          DESCRIPTION
                "The collection of objects providing management of
                 a RADIUS Dynamic Authorization Client."
          ::= { radiusDynAuthClientMIBGroups 1 }

   radiusDynAuthClientAuthOnlyGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthClientDisconAuthOnlyRequests,
                    radiusDynAuthClientDisconNakAuthOnlyRequest,
                    radiusDynAuthClientCoAAuthOnlyRequest,
                    radiusDynAuthClientCoANakAuthOnlyRequest
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages including Service-Type attribute with
                 value 'Authorize Only'."
          ::= { radiusDynAuthClientMIBGroups 2 }

   radiusDynAuthClientNoSessGroup OBJECT-GROUP
          OBJECTS { radiusDynAuthClientDisconNakSessNoContext,
                    radiusDynAuthClientCoANakSessNoContext
                  }
          STATUS  current
          DESCRIPTION
                "The collection of objects supporting the RADIUS
                 messages that are referring to non-existing sessions."
          ::= { radiusDynAuthClientMIBGroups 3 }



   END

5.  Security Considerations

   There are no management objects defined in this MIB module that have
   a MAX-ACCESS clause of read-write and/or read-create.  So, if this
   MIB module is implemented correctly, then there is no risk that an
   intruder can alter or create any management objects of this MIB
   module via direct SNMP SET operations.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:




De Cnodder, et al.           Informational                     [Page 19]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


   radiusDynAuthServerAddress and radiusDynAuthServerAddressType

      These can be used to determine the address of the DAS with which
      the DAC is communicating.  This information could be useful in
      mounting an attack on the DAS.

   radiusDynAuthServerID

      This can be used to determine the Identifier of the DAS.  This
      information could be useful in impersonating the DAS.

   radiusDynAuthServerClientPortNumber

      This can be used to determine the destination port number to which
      the DAC is sending.  This information could be useful in mounting
      an attack on the DAS.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPsec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).

   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of this MIB module is properly configured to give access to
   the objects only to those principals (users) that have legitimate
   rights to indeed GET or SET (change/create/delete) them.

6.  IANA Considerations

   The IANA has assigned OID number 145 under mib-2.

7.  Acknowledgements

   The authors would also like to acknowledge the following people for
   their comments on this document: Bernard Aboba, Alan DeKok, David
   Nelson, Anjaneyulu Pata, Dan Romascanu, Juergen Schoenwaelder, Greg
   Weber, Bert Wijnen, and Glen Zorn.





De Cnodder, et al.           Informational                     [Page 20]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


8.  References

8.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Structure of Management Information Version 2 (SMIv2)",
              STD 58, RFC 2578, April 1999.

   [RFC2579]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Textual Conventions for SMIv2", STD 58, RFC 2579, April
              1999.

   [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC3411]  Harrington, D., Presuhn, R., and B. Wijnen, "An
              Architecture for Describing Simple Network Management
              Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
              December 2002.

   [RFC3576]  Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B.
              Aboba, "Dynamic Authorization Extensions to Remote
              Authentication Dial In User Service (RADIUS)", RFC 3576,
              July 2003.

   [RFC4001]  Daniele, M., Haberman, B., Routhier, S., and J.
              Schoenwaelder, "Textual Conventions for Internet Network
              Addresses", RFC 4001, February 2005.

8.2.  Informative References

   [RFC2865]  Rigney, C., Willens, S., Rubens, A., and W. Simpson,
              "Remote Authentication Dial In User Service (RADIUS)", RFC
              2865, June 2000.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.

   [RFC4669]  Nelson, D., "RADIUS Authentication Server MIB for IPv6",
              RFC 4669, August 2006.

   [RFC4671]  Nelson, D., "RADIUS Accounting Server MIB for IPv6", RFC
              4671, August 2006.



De Cnodder, et al.           Informational                     [Page 21]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


   [RFC4673]  De Cnodder, S., Jonnala, N., and M. Chiba, "RADIUS Dynamic
              Authorization Server MIB", RFC 4673, September 2006.

Authors' Addresses

   Stefaan De Cnodder
   Alcatel
   Francis Wellesplein 1
   B-2018 Antwerp
   Belgium

   Phone: +32 3 240 85 15
   EMail: stefaan.de_cnodder@alcatel.be


   Nagi Reddy Jonnala
   Cisco Systems, Inc.
   Divyasree Chambers, B Wing, O'Shaugnessy Road
   Bangalore-560027, India

   Phone: +91 94487 60828
   EMail: njonnala@cisco.com


   Murtaza Chiba
   Cisco Systems, Inc.
   170 West Tasman Dr.
   San Jose CA, 95134

   Phone: +1 408 525 7198
   EMail: mchiba@cisco.com




















De Cnodder, et al.           Informational                     [Page 22]


RFC 4672        RADIUS Dynamic Authorization Client MIB   September 2006


Full Copyright Statement

   Copyright (C) The Internet Society (2006).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).







De Cnodder, et al.           Informational                     [Page 23]

mirror server hosted at Truenetwork, Russian Federation.