Network Working Group                                          A. Newton
Request for Comments: 5144        American Registry for Internet Numbers
Category: Standards Track                                        M. Sanz
                                                                DENIC eG
                                                           February 2008


         A Domain Availability Check (DCHK) Registry Type for
            the Internet Registry Information Service (IRIS)

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Abstract

   This document describes a lightweight domain availability service
   using the Internet Registry Information Service (IRIS) framework and
   the data model of the IRIS Domain Registry (DREG) service.




























Newton & Sanz               Standards Track                     [Page 1]


RFC 5144                       IRIS-DCHK                   February 2008


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Document Terminology . . . . . . . . . . . . . . . . . . . . .  3
   3.  Domain Availability Check Registry . . . . . . . . . . . . . .  3
     3.1.  Schema Description . . . . . . . . . . . . . . . . . . . .  4
       3.1.1.  The <domain> Result  . . . . . . . . . . . . . . . . .  4
       3.1.2.  Support for <iris:lookupEntity>  . . . . . . . . . . .  7
     3.2.  DCHK Formal XML Syntax . . . . . . . . . . . . . . . . . .  7
     3.3.  Blocks Extensible Exchange Protocol (BEEP) Transport
           Compliance . . . . . . . . . . . . . . . . . . . . . . . . 12
       3.3.1.  Message Pattern  . . . . . . . . . . . . . . . . . . . 12
       3.3.2.  Server Authentication  . . . . . . . . . . . . . . . . 12
     3.4.  URI Resolution . . . . . . . . . . . . . . . . . . . . . . 13
       3.4.1.  Application Service Label  . . . . . . . . . . . . . . 13
       3.4.2.  Bottom-Up Resolution . . . . . . . . . . . . . . . . . 13
       3.4.3.  Top-Down Resolution  . . . . . . . . . . . . . . . . . 13
   4.  Internationalization Considerations  . . . . . . . . . . . . . 13
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 14
     5.1.  XML Namespace Registration . . . . . . . . . . . . . . . . 14
     5.2.  XML Schema Registration  . . . . . . . . . . . . . . . . . 14
     5.3.  S-NAPTR Registration . . . . . . . . . . . . . . . . . . . 14
     5.4.  BEEP Registration  . . . . . . . . . . . . . . . . . . . . 15
   6.  Security Considerations  . . . . . . . . . . . . . . . . . . . 15
   7.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 15
     7.1.  Normative References . . . . . . . . . . . . . . . . . . . 15
     7.2.  Informative References . . . . . . . . . . . . . . . . . . 16
























Newton & Sanz               Standards Track                     [Page 2]


RFC 5144                       IRIS-DCHK                   February 2008


1.  Introduction

   This document describes a lightweight service for checking the
   availability of domain names.  This service is based on the IRIS
   framework and uses the data model defined by RFC 3982 [7].  By doing
   this, the domain availability service has the advantages provided by
   IRIS and DREG, such as well-known methods for server navigation,
   structured queries and results, and layered extensibility.

   The use of IRIS for this service also allows seamless integration
   between the domain availability service and the service provided by
   DREG.  This allows a user to find the availability status of a domain
   and reference the full registration information in DREG.

   The data model in this service (called a registry schema in IRIS
   terms) is a strict subset of the DREG data model.  This enables
   implementors to directly reuse DREG code paths and allows operators
   to deploy the service in either the same server processes as a DREG
   service (same host and port) or in a different server process
   (different port) or machine (different host).

   As an example, an operator may wish to deploy both types of service
   on the same set of machines.  As time goes on, the operator may then
   decide to segregate the services, placing the domain availability
   service on one set of machines and the DREG service on a separate set
   of machines with a stricter set of controls.  Either deployment
   scenario is transparent to the end user and always appears to be
   seamlessly complementary.

   When coupled with [9], this domain availability service is
   lightweight and extremely efficient for high-volume, public-facing
   service.

2.  Document Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [2].

3.  Domain Availability Check Registry

   The data model used for the domain availability check (DCHK) service
   is a strict subset of the DREG data model.  This section describes
   the DCHK registry type.







Newton & Sanz               Standards Track                     [Page 3]


RFC 5144                       IRIS-DCHK                   February 2008


3.1.  Schema Description

   References to XML elements with no namespace qualifier are from the
   schema defined in Section 3.2.  References to elements and attributes
   with the "iris" XML namespace qualifier are from the schema defined
   in IRIS [6].

   The schema present in this document is tied to the protocol version
   associated with the XML namespace URI defined in Section 5.2.
   Extensions to the present DCHK schema are allowed, though not
   recommended, but would require a new version.  Please refer to RFC
   3981 [6] for more details about versioning the IRIS protocol.

   The descriptions contained within this section refer to XML elements
   and attributes and their relation to the exchange of data within the
   protocol.  These descriptions also contain specifications outside the
   scope of the formal XML syntax.  Therefore, this section will use
   terms defined by RFC 2119 [2] to describe the specification outside
   the scope of the formal XML syntax.  While reading this section,
   please reference Section 3.2 for needed details on the formal XML
   syntax.

3.1.1.  The <domain> Result

   An example of a <domain> result:

   <domain
     authority="iana.org" registryType="dchk1"
     entityClass="domain-name" entityName="example.com">
     <domainName>example.com</domainName>
     <status><active/></status>
   </domain>

                             <domain> Example

   The <domain> result represents an instance of a domain assignment.
   The children of the <domain> element are as follows:

   o  <domainName> - the full name of the domain as it is in DNS.  The
      contents of this element MUST be a domain name as specified by RFC
      1035 [1].

   o  <idn> - the name of the domain in nameprep form, if applicable.
      See RFC 3491 [3].

   o  <status> - this element may contain child elements representing
      domain status information.  It defines the following status types:




Newton & Sanz               Standards Track                     [Page 4]


RFC 5144                       IRIS-DCHK                   February 2008


      *  <active> - available via DNS (either via delegation or direct
         publication).

      *  <inactive> - unavailable via DNS.

      *  <dispute> - registrant assignment is in dispute.

      *  <addPeriod> - the domain is in the grace period after creation
         or activation (see RFC 3915 [5]).

      *  <renewPeriod> - the domain is in the grace period after renewal
         (see RFC 3915 [5]).

      *  <autoRenewPeriod> - the domain is in the grace period after
         automatic renewal (see RFC 3915 [5]).

      *  <transferPeriod> - the domain is in the grace period after
         transfer (see RFC 3915 [5]).

      *  <redemptionPeriod> - the domain is in the grace period after
         deletion (see RFC 3915 [5]).

      *  <policyCompliant> - the domain is considered compliant
         according to a given policy specified by the substatus
         identifier.

      *  <policyNoncompliant> - the domain is not considered compliant
         according to a given policy specified by the substatus
         identifier.

      *  <reserved> - the domain is reserved and is not available for
         registration under normal registration procedures.

      *  <create> - specifies the creation of the domain in the
         registration system.  This status is usually further refined by
         the disposition attribute.

      *  <delete> - specifies the deletion of the domain in the
         registration system.  This status is usually further refined by
         the disposition attribute.

      *  <renew> - specifies the renewal of domain registration.  This
         status is usually further refined by the disposition attribute.

      *  <restore> - specifies the restoration to the previous state of
         the domain before it was deleted.  This status is usually
         further refined by the disposition attribute.




Newton & Sanz               Standards Track                     [Page 5]


RFC 5144                       IRIS-DCHK                   February 2008


      *  <transfer> - specifies the transfer of the domain from one
         responsible or owning entity in the registration system to
         another.  This status is usually further refined by the
         disposition attribute.

      *  <update> - specifies a general modification of the domain
         information.  This status is usually be further refined by the
         disposition attribute.

      *  <other> - specifies a registration system specific status of
         the domain.

   o  <registrationReference> - an element containing an entity
      reference, the referent of which MUST be either a <domain>
      (Section 3.1.1) or a <domain> as defined by RFC 3982 [7].  The
      intent of this element is to point to the downstream registration
      reference.  Therefore, if this is a result given back by a domain
      registry, it should point to the domain in the domain registrar or
      registrant service.

   o  <createdDateTime> - an element containing the date and time of the
      creation of this domain.

   o  <initialDelegationDateTime> - an element containing the date and
      time of the initial delegation of this domain.

   o  <expirationDateTime> - an element containing the date and time of
      the expiration of this domain.

   o  <lastDatabaseUpdateDateTime> - an element containing the date and
      time of the last actualization of the database that is the source
      for this result.

   o  <iris:seeAlso> - an element containing an entity reference
      specifying a referent that is indirectly associated with this
      domain.

3.1.1.1.  Domain Status Type

   Each element of type 'domainStatusType' has the following
   composition:

   o  <appliedDate> - an optional child element containing the date
      applicable to creation of the status.

   o  <ticket> - an optional child element containing a service ticket
      identifier relevant to the status.




Newton & Sanz               Standards Track                     [Page 6]


RFC 5144                       IRIS-DCHK                   February 2008


   o  <description> - zero or more child elements with text to describe
      the status in natural language.  Each of these elements MUST have
      a 'language' attribute describing the language of the description
      element.

   o  <subStatus> - a child element indicating further status
      information.  Values for this element are not defined by this
      specification.  This child element has a required 'authority'
      attribute to indicate the origin of the specification of the value
      of this element.

   o  'actor' - an optional attribute indicating the acting entity for
      which this status is applied.  The values may be "registry",
      "registrar", or "registrationServiceProvider".

   o  'disposition' - an optional attribute indicating the nature of
      this status.  The values may be "pending" or "prohibited".

   o  'scope' - an optional attribute indicating the context or origin
      of the status value.

3.1.2.  Support for <iris:lookupEntity>

   The following types of entity classes are recognized by the
   <lookupEntity> query of IRIS for this registry:

   o  domain-name - the fully qualified name of a domain.  This is a
      domain name as specified by RFC 1035 [1].  Yields a <domain>
      (Section 3.1.1) in the response.

   o  idn - the fully qualified name of a domain in nameprep form (see
      RFC 3491 [3]).  Yields a <domain> (Section 3.1.1) in the response.

3.2.  DCHK Formal XML Syntax

   This registry schema is specified in the XML Schema notation (see
   [10] and [11]).  The formal syntax presented here is a complete
   schema representation of an XML instance when combined with the
   formal schema syntax of IRIS.

   <?xml version="1.0"?>
   <schema xmlns="http://www.w3.org/2001/XMLSchema"
     xmlns:dchk="urn:ietf:params:xml:ns:dchk1"
     xmlns:iris="urn:ietf:params:xml:ns:iris1"
     targetNamespace="urn:ietf:params:xml:ns:dchk1"
     elementFormDefault="qualified" >





Newton & Sanz               Standards Track                     [Page 7]


RFC 5144                       IRIS-DCHK                   February 2008


     <import namespace="urn:ietf:params:xml:ns:iris1" />

     <annotation>
       <documentation>
         Domain availability check schema
         derived from IRIS schema
       </documentation>
     </annotation>

     <!-- ========================================= -->
     <!--                                           -->
     <!-- Result Types                              -->
     <!--                                           -->
     <!-- ========================================= -->

     <!--                                           -->
     <!-- Domain                                    -->
     <!--                                           -->

     <complexType
       name="domainType">
       <complexContent>
         <extension
           base="iris:resultType">
           <sequence>
             <element
               name="domainName"
               type="token" />
             <element
               name="idn"
               type="token"
               minOccurs="0"
               maxOccurs="1" />
             <element name="status"
               minOccurs="0"
               maxOccurs="1">
               <complexType>
                 <choice minOccurs="0" maxOccurs="unbounded">
                   <element
                     name="active"
                     type="dchk:domainStatusType" />
                   <element
                     name="inactive"
                     type="dchk:domainStatusType" />
                   <element
                     name="dispute"
                     type="dchk:domainStatusType" />
                   <element



Newton & Sanz               Standards Track                     [Page 8]


RFC 5144                       IRIS-DCHK                   February 2008


                     name="renew"
                     type="dchk:domainStatusType" />
                   <element
                     name="addPeriod"
                     type="dchk:domainStatusType" />
                   <element
                     name="renewPeriod"
                     type="dchk:domainStatusType" />
                   <element
                     name="autoRenewPeriod"
                     type="dchk:domainStatusType" />
                   <element
                     name="transferPeriod"
                     type="dchk:domainStatusType" />
                   <element
                     name="redemptionPeriod"
                     type="dchk:domainStatusType" />
                   <element
                     name="restore"
                     type="dchk:domainStatusType" />
                   <element
                     name="policyCompliant"
                     type="dchk:domainStatusType" />
                   <element
                     name="policyNoncompliant"
                     type="dchk:domainStatusType" />
                   <element
                     name="reserved"
                     type="dchk:domainStatusType" />
                   <element
                     name="create"
                     type="dchk:domainStatusType" />
                   <element
                     name="delete"
                     type="dchk:domainStatusType" />
                   <element
                     name="transfer"
                     type="dchk:domainStatusType" />
                   <element
                     name="update"
                     type="dchk:domainStatusType" />
                   <element
                     name="other"
                     type="dchk:domainStatusType" />
                 </choice>
               </complexType>
             </element>
             <element



Newton & Sanz               Standards Track                     [Page 9]


RFC 5144                       IRIS-DCHK                   February 2008


               name="registrationReference"
               type="iris:entityType"
               minOccurs="0"
               maxOccurs="1" />
             <element
               name="createdDateTime"
               type="dateTime"
               minOccurs="0"
               maxOccurs="1" />
             <element
               name="initialDelegationDateTime"
               type="dateTime"
               minOccurs="0"
               maxOccurs="1" />
             <element
               name="expirationDateTime"
               type="dateTime"
               minOccurs="0"
               maxOccurs="1" />
             <element
               name="lastDatabaseUpdateDateTime"
               type="dateTime"
               minOccurs="0"
               maxOccurs="1" />
             <element
               ref="iris:seeAlso"
               minOccurs="0"
               maxOccurs="unbounded" />
           </sequence>
         </extension>
       </complexContent>
     </complexType>

     <element
       name="domain"
       type="dchk:domainType"
       substitutionGroup="iris:result" />

     <complexType
       name="domainStatusType">
       <sequence>
         <element
           name="appliedDate"
           type="dateTime"
           minOccurs="0"
           maxOccurs="1" />
         <element
           name="ticket"



Newton & Sanz               Standards Track                    [Page 10]


RFC 5144                       IRIS-DCHK                   February 2008


           type="token"
           minOccurs="0"
           maxOccurs="unbounded" />
         <element
           name="description"
           minOccurs="0"
           maxOccurs="unbounded">
           <complexType>
             <simpleContent>
               <extension
                 base="string">
                 <attribute
                   name="language"
                   type="language"
                   use="required" />
               </extension>
             </simpleContent>
           </complexType>
         </element>
         <element
           name="subStatus"
           minOccurs="0"
           maxOccurs="1">
           <complexType>
             <simpleContent>
               <extension
                 base="token">
                 <attribute
                   type="token"
                   use="required"
                   name="authority"/>
               </extension>
             </simpleContent>
           </complexType>
         </element>
       </sequence>
       <attribute
         name="actor">
         <simpleType>
           <restriction
             base="string">
             <enumeration
               value="registry"/>
             <enumeration
               value="registrar"/>
             <enumeration
               value="registrationServiceProvider"/>
           </restriction>



Newton & Sanz               Standards Track                    [Page 11]


RFC 5144                       IRIS-DCHK                   February 2008


         </simpleType>
       </attribute>
       <attribute
         name="disposition">
         <simpleType>
           <restriction
             base="string">
             <enumeration
               value="prohibited"/>
             <enumeration
               value="pending"/>
           </restriction>
         </simpleType>
       </attribute>
       <attribute
         name="scope"
         type="token" />
     </complexType>
   </schema>

                            Figure 1: dchk.xsd

3.3.  Blocks Extensible Exchange Protocol (BEEP) Transport Compliance

   All DCHK clients and servers MUST implement the Lightweight UDP
   Transport Protocol (IRIS-LWZ) [9].  The use of other transports like
   the XML Pipelining with Chunks (IRIS-XPC) transport [12] or the BEEP
   transport [8] is optional and completely at the discretion of the
   server operator.  The XPC transport is in any case preferable to the
   BEEP transport.

   IRIS allows several extensions of the core capabilities.  This
   section outlines those extensions allowable by IRIS-BEEP [8].

3.3.1.  Message Pattern

   This registry type uses the default message pattern as described in
   IRIS-BEEP [8].

3.3.2.  Server Authentication

   This registry type uses the default server authentication method as
   described in IRIS-BEEP [8].








Newton & Sanz               Standards Track                    [Page 12]


RFC 5144                       IRIS-DCHK                   February 2008


3.4.  URI Resolution

3.4.1.  Application Service Label

   The application service label associated with this registry type MUST
   be "DCHK1".  This is the abbreviated form of the URN for this
   registry type, urn:ietf:params:xml:ns:dchk1.

3.4.2.  Bottom-Up Resolution

   The bottom-up alternative resolution method MUST be identified as
   'bottom' in IRIS URI's.  Its process is identical to the 'bottom'
   process described by RFC 3982 [7].

3.4.3.  Top-Down Resolution

   The top-down alternative resolution method MUST be identified as
   'top' in IRIS URI's.  Its process is identical to the 'top' process
   described by RFC 3982 [7].

4.  Internationalization Considerations

   Implementors should be aware of considerations for
   internationalization in IRIS [6].

   Clients needing to localize the data tags in this protocol should
   take note that localization is only needed on the names of XML
   elements and attributes, with the exception of elements containing
   date and time information.  The schema for this registry has been
   designed so that clients need not interpret the content of elements
   or attributes for localization, other than those elements containing
   date and time information.

   Clients should also make use of the <language> elements provided in
   many of the results.  Results containing internationalized data can
   be accompanied by these elements in order to aid better localization
   of the data by the user.

   All date and time elements make use of the XML Schema [10] data type
   "dateTime".  If their contents are Coordinated Universal Time (UTC)
   timestamps, they MUST be specified by using the capitalized 'Z'
   indicator (instead of 'z').









Newton & Sanz               Standards Track                    [Page 13]


RFC 5144                       IRIS-DCHK                   February 2008


5.  IANA Considerations

5.1.  XML Namespace Registration

   This document makes use of the XML registry specified in RFC 3688
   [4].  Accordingly, IANA has made the following registration:

   o  XML Namespace URN/URI:

      *  urn:ietf:params:xml:ns:dchk1

   o  Contact:

      *  Andrew Newton <andy@hxr.us>

      *  Marcos Sanz <sanz@denic.de>

   o  XML:

      *  None.

5.2.  XML Schema Registration

   This document makes use of the XML registry specified in RFC 3688
   [4].  Accordingly, IANA has made the following registration:

   o  XML Schema URN/URI:

      *  urn:ietf:params:xml:schema:dchk1

   o  Contact:

      *  Andrew Newton <andy@hxr.us>

      *  Marcos Sanz <sanz@denic.de>

   o  XML:

      *  The XML Schema specified in Section 3.2

5.3.  S-NAPTR Registration

   The following Sraightforwarad-NAPTR (S-NAPTR) application service
   label has been registered with IANA according to the IANA
   considerations defined in IRIS [6]:

      DCHK1




Newton & Sanz               Standards Track                    [Page 14]


RFC 5144                       IRIS-DCHK                   February 2008


5.4.  BEEP Registration

   The following BEEP Profile URI has been registered with IANA, in
   addition to the registration provided in IRIS-BEEP [8].

      http://iana.org/beep/iris1/dchk1

6.  Security Considerations

   Being a proper subset of RFC 3982 [7], the registry described in this
   document introduces no security considerations beyond those
   documented in RFC 3981 [6].

7.  References

7.1.  Normative References

   [1]   Mockapetris, P., "Domain names - implementation and
         specification", STD 13, RFC 1035, November 1987.

   [2]   Bradner, S., "Key words for use in RFCs to Indicate Requirement
         Levels", BCP 14, RFC 2119, March 1997.

   [3]   Hoffman, P. and M. Blanchet, "Nameprep: A Stringprep Profile
         for Internationalized Domain Names (IDN)", RFC 3491,
         March 2003.

   [4]   Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
         January 2004.

   [5]   Hollenbeck, S., "Domain Registry Grace Period Mapping for the
         Extensible Provisioning Protocol (EPP)", RFC 3915,
         September 2004.

   [6]   Newton, A. and M. Sanz, "IRIS: The Internet Registry
         Information Service (IRIS) Core Protocol", RFC 3981,
         January 2005.

   [7]   Newton, A. and M. Sanz, "IRIS: A Domain Registry (dreg) Type
         for the Internet Registry Information Service (IRIS)",
         RFC 3982, January 2005.

   [8]   Newton, A. and M. Sanz, "Using the Internet Registry
         Information Service (IRIS) over the Blocks Extensible Exchange
         Protocol (BEEP)", RFC 3983, January 2005.

   [9]   Newton, A., "A Lightweight UDP Transfer Protocol for the
         Internet Registry Information Service", RFC 4993, August 2007.



Newton & Sanz               Standards Track                    [Page 15]


RFC 5144                       IRIS-DCHK                   February 2008


   [10]  World Wide Web Consortium, "XML Schema Part 2: Datatypes",
         W3C XML Schema, October 2004,
         <http://www.w3.org/TR/xmlschema-2/>.

   [11]  World Wide Web Consortium, "XML Schema Part 1: Structures",
         W3C XML Schema, October 2004,
         <http://www.w3.org/TR/xmlschema-1/>.

7.2.  Informative References

   [12]  Newton, A., "XML Pipelining with Chunks for the Internet
         Registry Information Service", RFC 4992, August 2007.

Authors' Addresses

   Andrew L. Newton
   American Registry for Internet Numbers
   3635 Concorde Parkway, Suite 200
   Chantilly, VA  20151
   USA

   Phone: +1 703 227 9884
   EMail: andy@arin.net
   URI:   http://www.arin.net/


   Marcos Sanz
   DENIC eG
   Kaiserstrasse 75-77
   D-60329 Frankfurt
   Germany

   EMail: sanz@denic.de
   URI:   http://www.denic.de/

















Newton & Sanz               Standards Track                    [Page 16]


RFC 5144                       IRIS-DCHK                   February 2008


Full Copyright Statement

   Copyright (C) The IETF Trust (2008).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.












Newton & Sanz               Standards Track                    [Page 17]

mirror server hosted at Truenetwork, Russian Federation.