Internet Engineering Task Force (IETF)                          M. Jones
Request for Comments: 7797                                     Microsoft
Updates: 7519                                              February 2016
Category: Standards Track
ISSN: 2070-1721


           JSON Web Signature (JWS) Unencoded Payload Option

Abstract

   JSON Web Signature (JWS) represents the payload of a JWS as a
   base64url-encoded value and uses this value in the JWS Signature
   computation.  While this enables arbitrary payloads to be integrity
   protected, some have described use cases in which the base64url
   encoding is unnecessary and/or an impediment to adoption, especially
   when the payload is large and/or detached.  This specification
   defines a means of accommodating these use cases by defining an
   option to change the JWS Signing Input computation to not base64url-
   encode the payload.  This option is intended to broaden the set of
   use cases for which the use of JWS is a good fit.

   This specification updates RFC 7519 by stating that JSON Web Tokens
   (JWTs) MUST NOT use the unencoded payload option defined by this
   specification.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc7797.












Jones                        Standards Track                    [Page 1]


RFC 7797              JWS Unencoded Payload Option         February 2016


Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Notational Conventions  . . . . . . . . . . . . . . . . .   3
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   4
   3.  The "b64" Header Parameter  . . . . . . . . . . . . . . . . .   4
   4.  Examples  . . . . . . . . . . . . . . . . . . . . . . . . . .   5
     4.1.  Example with Header Parameters {"alg":"HS256"}  . . . . .   6
     4.2.  Example with Header Parameters
           {"alg":"HS256","b64":false,"crit":["b64"]}  . . . . . . .   7
   5.  Unencoded Payload Content Restrictions  . . . . . . . . . . .   7
     5.1.  Unencoded Detached Payload  . . . . . . . . . . . . . . .   8
     5.2.  Unencoded JWS Compact Serialization Payload . . . . . . .   8
     5.3.  Unencoded JWS JSON Serialization Payload  . . . . . . . .   8
   6.  Using "crit" with "b64" . . . . . . . . . . . . . . . . . . .   9
   7.  Intended Use by Applications  . . . . . . . . . . . . . . . .   9
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .   9
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  10
     9.1.  JSON Web Signature and Encryption Header Parameter
           Registration  . . . . . . . . . . . . . . . . . . . . . .  10
       9.1.1.  Registry Contents . . . . . . . . . . . . . . . . . .  10
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  10
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  10
     10.2.  Informative References . . . . . . . . . . . . . . . . .  11
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .  11
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  11










Jones                        Standards Track                    [Page 2]


RFC 7797              JWS Unencoded Payload Option         February 2016


1.  Introduction

   The "JSON Web Signature (JWS)" [JWS] specification defines the JWS
   Signing Input as the input to the digital signature or Message
   Authentication Code (MAC) computation, with the value
   ASCII(BASE64URL(UTF8(JWS Protected Header)) || '.' || BASE64URL(JWS
   Payload)).  While this works well in practice for many use cases,
   including those accommodating arbitrary payload values, other use
   cases have been described in which base64url-encoding the payload is
   unnecessary and/or an impediment to adoption, particularly when the
   payload is large and/or detached.

   This specification introduces a new JWS Header Parameter value that
   generalizes the JWS Signing Input computation in a manner that makes
   base64url-encoding the payload selectable and optional.  The primary
   set of use cases where this enhancement may be helpful are those in
   which the payload may be very large and where means are already in
   place to enable the payload to be communicated between the parties
   without modifications.  Appendix F of [JWS] describes how to
   represent JWSs with detached content, which would typically be used
   for these use cases.

   The advantages of not having to base64url-encode a large payload are
   that allocation of the additional storage to hold the base64url-
   encoded form is avoided and the base64url-encoding computation never
   has to be performed.  In summary, this option can help avoid
   unnecessary copying and transformations of the potentially large
   payload, resulting in sometimes significant space and time
   improvements for deployments.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   "Key words for use in RFCs to Indicate Requirement Levels" [RFC2119].
   The interpretation should only be applied when the terms appear in
   all capital letters.

   BASE64URL(OCTETS) denotes the base64url encoding of OCTETS, per
   Section 2 of [JWS].

   UTF8(STRING) denotes the octets of the UTF-8 [RFC3629] representation
   of STRING, where STRING is a sequence of zero or more Unicode
   [UNICODE] characters.






Jones                        Standards Track                    [Page 3]


RFC 7797              JWS Unencoded Payload Option         February 2016


   ASCII(STRING) denotes the octets of the ASCII [RFC20] representation
   of STRING, where STRING is a sequence of zero or more ASCII
   characters.

   The concatenation of two values A and B is denoted as A || B.

2.  Terminology

   This specification uses the same terminology as the "JSON Web
   Signature" [JWS] and "JSON Web Algorithms" [JWA] specifications.

3.  The "b64" Header Parameter

   This Header Parameter modifies the JWS Payload representation and the
   JWS Signing Input computation in the following way:

   b64
      The "b64" (base64url-encode payload) Header Parameter determines
      whether the payload is represented in the JWS and the JWS Signing
      Input as ASCII(BASE64URL(JWS Payload)) or as the JWS Payload value
      itself with no encoding performed.  When the "b64" value is
      "false", the payload is represented simply as the JWS Payload
      value; otherwise, it is represented as ASCII(BASE64URL(JWS
      Payload)).  The "b64" value is a JSON boolean, with a default
      value of "true".  When used, this Header Parameter MUST be
      integrity protected; therefore, it MUST occur only within the JWS
      Protected Header.  Use of this Header Parameter is OPTIONAL.  If
      the JWS has multiple signatures and/or MACs, the "b64" Header
      Parameter value MUST be the same for all of them.  Note that
      unless the payload is detached, many payload values would cause
      errors parsing the resulting JWSs, as described in Section 5.

   The following table shows the JWS Signing Input computation,
   depending upon the value of this parameter:

   +-------+-----------------------------------------------------------+
   | "b64" | JWS Signing Input Formula                                 |
   +-------+-----------------------------------------------------------+
   | true  | ASCII(BASE64URL(UTF8(JWS Protected Header)) || '.' ||     |
   |       | BASE64URL(JWS Payload))                                   |
   |       |                                                           |
   | false | ASCII(BASE64URL(UTF8(JWS Protected Header)) || '.') ||    |
   |       | JWS Payload                                               |
   +-------+-----------------------------------------------------------+







Jones                        Standards Track                    [Page 4]


RFC 7797              JWS Unencoded Payload Option         February 2016


4.  Examples

   This section gives examples of JWSs showing the difference that using
   the "b64" Header Parameter makes.  The examples all use the JWS
   Payload value [36, 46, 48, 50].  This octet sequence represents the
   ASCII characters "$.02"; its base64url-encoded representation is
   "JC4wMg".

   The following table shows a set of Header Parameter values without
   using a false "b64" Header Parameter value and a set using it, with
   the resulting JWS Signing Input values represented as ASCII
   characters:

   +-----------------------------+-------------------------------------+
   | JWS Protected Header        | JWS Signing Input Value             |
   +-----------------------------+-------------------------------------+
   | {"alg":"HS256"}             | eyJhbGciOiJIUzI1NiJ9.JC4wMg         |
   |                             |                                     |
   | {"alg":"HS256","b64":false, | eyJhbGciOiJIUzI1NiIsImI2NCI6ZmFsc2U |
   | "crit":["b64"]}             | sImNyaXQiOlsiYjY0Il19.$.02          |
   +-----------------------------+-------------------------------------+

   These examples use the Hash-based Message Authentication Code (HMAC)
   key from Appendix A.1 of [JWS], which is represented below as a JSON
   Web Key [JWK] (with line breaks within values for display purposes
   only):

     {
      "kty":"oct",
      "k":"AyM1SysPpbyDfgZld3umj1qzKObwVMkoqQ-EstJQLr_T-1qS0gZH75
           aKtMN3Yj0iPS4hcgUuTwjAzZr1Z9CAow"
     }

   The rest of this section shows complete representations for the two
   JWSs above.
















Jones                        Standards Track                    [Page 5]


RFC 7797              JWS Unencoded Payload Option         February 2016


4.1.  Example with Header Parameters {"alg":"HS256"}

   The complete JWS representation for this example using the JWS
   Compact Serialization and a non-detached payload (with line breaks
   for display purposes only) is:

     eyJhbGciOiJIUzI1NiJ9
     .
     JC4wMg
     .
     5mvfOroL-g7HyqJoozehmsaqmvTYGEq5jTI1gVvoEoQ

   Note that this JWS uses only features defined by [JWS] and does not
   use the new "b64" Header Parameter.  It is the "control" so that
   differences when it is used can be easily seen.

   The equivalent representation for this example using the flattened
   JWS JSON Serialization is:

     {
      "protected":
       "eyJhbGciOiJIUzI1NiJ9",
      "payload":
       "JC4wMg",
      "signature":
       "5mvfOroL-g7HyqJoozehmsaqmvTYGEq5jTI1gVvoEoQ"
     }
























Jones                        Standards Track                    [Page 6]


RFC 7797              JWS Unencoded Payload Option         February 2016


4.2.  Example with Header Parameters
      {"alg":"HS256","b64":false,"crit":["b64"]}

   The complete JWS representation for this example using the JWS
   Compact Serialization and a detached payload (with line breaks for
   display purposes only) is:

     eyJhbGciOiJIUzI1NiIsImI2NCI6ZmFsc2UsImNyaXQiOlsiYjY0Il19
     .
     .
     A5dxf2s96_n5FLueVuW1Z_vh161FwXZC4YLPff6dmDY

   Note that the payload "$.02" cannot be represented in this JWS in its
   unencoded form because it contains a period ('.') character, which
   would cause parsing problems.  This JWS is therefore shown with a
   detached payload.

   The complete JWS representation for this example using the flattened
   JWS JSON Serialization and a non-detached payload is:

     {
      "protected":
       "eyJhbGciOiJIUzI1NiIsImI2NCI6ZmFsc2UsImNyaXQiOlsiYjY0Il19",
      "payload":
       "$.02",
      "signature":
       "A5dxf2s96_n5FLueVuW1Z_vh161FwXZC4YLPff6dmDY"
     }

   If using a detached payload with the JWS JSON Serialization, the
   "payload" element would be omitted.

5.  Unencoded Payload Content Restrictions

   When the "b64" value is "false", different restrictions on the
   payload contents apply, depending upon the circumstances, as
   described in this section.  The restrictions prevent the use of
   payload values that would cause errors parsing the resulting JWSs.

   Note that because the character sets that can be used for unencoded
   non-detached payloads differ between the two serializations, some
   JWSs using a "b64" value of "false" cannot be syntactically converted
   between the JWS JSON Serialization and the JWS Compact Serialization.
   See Section 8 for security considerations on using unencoded
   payloads.






Jones                        Standards Track                    [Page 7]


RFC 7797              JWS Unencoded Payload Option         February 2016


5.1.  Unencoded Detached Payload

   Appendix F of [JWS] describes how to represent JWSs with detached
   content.  A detached payload can contain any octet sequence
   representable by the application.  The payload value will not cause
   problems parsing the JWS, since it is not represented as part of the
   JWS.  If an application uses a content encoding when representing the
   payload, then it MUST specify whether the signature or MAC is
   performed over the content-encoded representation or over the
   unencoded content.

5.2.  Unencoded JWS Compact Serialization Payload

   When using the JWS Compact Serialization, unencoded non-detached
   payloads using period ('.') characters would cause parsing errors;
   such payloads MUST NOT be used with the JWS Compact Serialization.
   Similarly, if a JWS using the JWS Compact Serialization and a
   non-detached payload is to be transmitted in a context that requires
   URL-safe characters, then the application MUST ensure that the
   payload contains only the URL-safe characters 'a'-'z', 'A'-'Z',
   '0'-'9', dash ('-'), underscore ('_'), and tilde ('~').  The payload
   value is the ASCII representation of the characters in the payload
   string.  The ASCII space character and all printable ASCII characters
   other than period ('.') (those characters in the ranges %x20-2D and
   %x2F-7E) MAY be included in a non-detached payload using the JWS
   Compact Serialization, provided that the application can transmit the
   resulting JWS without modification.

   No meaning or special semantics are attached to any characters in the
   payload.  For instance, the percent ('%') character represents itself
   and is not used by JWS objects for percent-encoding [RFC3986].
   Applications, of course, are free to utilize content-encoding rules
   of their choosing, provided that the encoded representations utilize
   only allowed payload characters.

5.3.  Unencoded JWS JSON Serialization Payload

   When using the JWS JSON Serialization, unencoded non-detached
   payloads must consist of the octets of the UTF-8 encoding of a
   sequence of Unicode code points that are representable in a JSON
   string.  The payload value is determined after performing any JSON
   string escape processing, per Section 8.3 of RFC 7159 [RFC7159], and
   then UTF-8-encoding the resulting Unicode code points.  This means,
   for instance, that these payloads represented as JSON strings are
   equivalent ("$.02", "\u0024.02").  Unassigned Unicode code point
   values MUST NOT be used to represent the payload.





Jones                        Standards Track                    [Page 8]


RFC 7797              JWS Unencoded Payload Option         February 2016


6.  Using "crit" with "b64"

   The "crit" Header Parameter MUST be included with "b64" in its set of
   values when using the "b64" Header Parameter to cause implementations
   not implementing "b64" to reject the JWS (instead of it being
   misinterpreted).

7.  Intended Use by Applications

   Application profiles should specify whether "b64" with a "false"
   value is to be used by the application in each application context or
   not, with it then being consistently applied in each application
   context.  For instance, an application that uses detached payloads
   might specify that "b64" with a "false" value always be used.  It is
   NOT RECOMMENDED that this parameter value be dynamically varied with
   different payloads in the same application context.

   While it is legal to use "b64" with a "true" value, it is RECOMMENDED
   that "b64" simply be omitted in this case, since it would be
   selecting the behavior already specified in [JWS].

   For interoperability reasons, JSON Web Tokens [JWT] MUST NOT use
   "b64" with a "false" value.

8.  Security Considerations

   [JWS] base64url-encodes the JWS Payload to restrict the set of
   characters used to represent it so that the representation does not
   contain characters used for delimiters in JWS representations.  Those
   delimiters are the period ('.') character for the JWS Compact
   Serialization and the double-quote ('"') character for the JWS JSON
   Serialization.  When the "b64" (base64url-encode payload) value is
   "false", these properties are lost.  It then becomes the
   responsibility of the application to ensure that payloads only
   contain characters that will not cause parsing problems for the
   serialization used, as described in Section 5.  The application also
   incurs the responsibility to ensure that the payload will not be
   modified during transmission.

   Note that if a JWS were to be created with a "b64" value of "false"
   without including the "crit" Header Parameter with "b64" in its set
   of values and it were to be received by an implementation not
   supporting the "b64" Header Parameter, then the signature or MAC
   would still verify but the recipient would believe that the intended
   JWS Payload value is the base64url decoding of the payload value
   received, rather than the payload value received itself.  For
   example, if the payload value received were "NDA1", an implementation
   not supporting this extension would interpret the intended payload as



Jones                        Standards Track                    [Page 9]


RFC 7797              JWS Unencoded Payload Option         February 2016


   being the base64url decoding of this value, which is "405".
   Requiring the use of the "crit" Header Parameter with "b64" in the
   set of values prevents this misinterpretation.

9.  IANA Considerations

9.1.  JSON Web Signature and Encryption Header Parameter Registration

   This specification registers the "b64" Header Parameter defined in
   Section 3 in the IANA "JSON Web Signature and Encryption Header
   Parameters" registry [IANA.JOSE] established by [JWS].

9.1.1.  Registry Contents

   o  Header Parameter Name: "b64"
   o  Header Parameter Description: Base64url-Encode Payload
   o  Header Parameter Usage Location(s): JWS
   o  Change Controller: IESG
   o  Specification Document(s): Section 3 of RFC 7797

10.  References

10.1.  Normative References

   [IANA.JOSE]
              IANA, "JSON Object Signing and Encryption (JOSE)",
              <http://www.iana.org/assignments/jose>.

   [JWA]      Jones, M., "JSON Web Algorithms (JWA)", RFC 7518,
              DOI 10.17487/RFC7518, May 2015,
              <http://www.rfc-editor.org/info/rfc7518>.

   [JWS]      Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
              2015, <http://www.rfc-editor.org/info/rfc7515>.

   [JWT]      Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
              (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
              <http://www.rfc-editor.org/info/rfc7519>.

   [RFC20]    Cerf, V., "ASCII format for Network Interchange", STD 80,
              RFC 20, October 1969,
              <http://www.rfc-editor.org/info/rfc20>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.



Jones                        Standards Track                   [Page 10]


RFC 7797              JWS Unencoded Payload Option         February 2016


   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <http://www.rfc-editor.org/info/rfc3629>.

   [RFC7159]  Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, DOI 10.17487/RFC7159, March
              2014, <http://www.rfc-editor.org/info/rfc7159>.

   [UNICODE]  The Unicode Consortium, "The Unicode Standard",
              <http://www.unicode.org/versions/latest/>.

10.2.  Informative References

   [JWK]      Jones, M., "JSON Web Key (JWK)", RFC 7517,
              DOI 10.17487/RFC7517, May 2015,
              <http://www.rfc-editor.org/info/rfc7517>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <http://www.rfc-editor.org/info/rfc3986>.

Acknowledgements

   Anders Rundgren, Richard Barnes, Phillip Hallam-Baker, Jim Schaad,
   Matt Miller, Martin Thomson, and others have all made the case for
   being able to use a representation of the payload that is not
   base64url encoded in contexts in which it safe to do so.

   Thanks to Sergey Beryozkin, Stephen Farrell, Benjamin Kaduk, James
   Manger, Kathleen Moriarty, Axel Nennker, Anders Rundgren, Nat
   Sakimura, Jim Schaad, Robert Sparks, and Matias Woloski for their
   reviews of the specification, and thanks to Vladimir Dzhuvinov for
   verifying the examples.

Author's Address

   Michael B. Jones
   Microsoft

   Email: mbj@microsoft.com
   URI:   http://self-issued.info/









Jones                        Standards Track                   [Page 11]

mirror server hosted at Truenetwork, Russian Federation.