draft-ietf-trill-rbridge-multilevel-07v3.original   draft-ietf-trill-rbridge-multilevel-07v3output.txt 
TRILL Working Group Radia Perlman TRILL Working Group R. Perlman
INTERNET-DRAFT EMC Internet-Draft EMC
Intended status: Informational Donald Eastlake Intended status: Informational D. Eastlake
Mingui Zhang Expires: January 4, 2018 M. Zhang
Huawei Huawei
Anoop Ghanwani A. Ghanwani
Dell Dell
Hongjun Zhai H. Zhai
JIT JIT
Expires: January 3, 2018 July 3, 2017 July 3, 2017
Alternatives for Multilevel TRILL Alternatives for Multilevel TRILL (Transparent Interconnection of Lots
(Transparent Interconnection of Lots of Links) of Links)
<draft-ietf-trill-rbridge-multilevel-07.txt> draft-ietf-trill-rbridge-multilevel-07.txt
Abstract Abstract
Although TRILL is based on IS-IS, which supports multilevel unicast Although TRILL is based on IS-IS, which supports multilevel unicast
routing, extending TRILL to multiple levels has challenges that are routing, extending TRILL to multiple levels has challenges that are
not addressed by the already-existing capabilities of IS-IS. One not addressed by the already-existing capabilities of IS-IS. One
issue is with the handling of multi-destination packet distribution issue is with the handling of multi-destination packet distribution
trees. Other issues are with TRILL switch nicknames. How are such trees. Other issues are with TRILL switch nicknames. How are such
nicknames allocated across a multilevel TRILL network? Do nicknames nicknames allocated across a multilevel TRILL network? Do nicknames
need to be unique across an entire multilevel TRILL network or can need to be unique across an entire multilevel TRILL network or can
they merely be unique within each multilevel area? they merely be unique within each multilevel area?
This informational document enumerates and examines alternatives This informational document enumerates and examines alternatives
based on a number of factors including backward compatibility, based on a number of factors including backward compatibility,
simplicity, and scalability and makes recommendations in some cases. simplicity, and scalability and makes recommendations in some cases.
Status of This Memo Status of This Memo
This Internet-Draft is submitted to IETF in full conformance with the This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79. Distribution of this document is provisions of BCP 78 and BCP 79.
unlimited. Comments should be sent to the TRILL working group
mailing list <trill@ietf.org>.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF). Note that other groups may also distribute
other groups may also distribute working documents as Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
INTERNET-DRAFT Multilevel TRILL This Internet-Draft will expire on January 4, 2018.
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/1id-abstracts.html. The list of Internet-Draft
Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
INTERNET-DRAFT Multilevel TRILL
Table of Contents
1. Introduction............................................4
1.1 The Motivation for Multilevel..........................4
1.2 Improvements Due to Multilevel.........................5
1.2.1. The Routing Computation Load........................5
1.2.2. LSDB Volatility Creating Too Much Control Traffic...5
1.2.3. LSDB Volatility Causing To Much Time Unconverged....6
1.2.4. The Size Of The LSDB................................6
1.2.5 Nickname Limit.......................................6
1.2.6 Multi-Destination Traffic............................7
1.3 Unique and Aggregated Nicknames........................7
1.4 More on Areas..........................................8
1.5 Terminology and Acronyms...............................8
2. Multilevel TRILL Issues................................10
2.1 Non-zero Area Addresses...............................11
2.2 Aggregated versus Unique Nicknames....................11
2.2.1 More Details on Unique Nicknames....................12
2.2.2 More Details on Aggregated Nicknames................13
2.2.2.1 Border Learning Aggregated Nicknames..............14
2.2.2.2 Swap Nickname Field Aggregated Nicknames..........16
2.2.2.3 Comparison........................................17
2.3 Building Multi-Area Trees.............................17
2.4 The RPF Check for Trees...............................18
2.5 Area Nickname Acquisition.............................18
2.6 Link State Representation of Areas....................19
3. Area Partition.........................................20
4. Multi-Destination Scope................................21
4.1 Unicast to Multi-destination Conversions..............21
4.1.1 New Tree Encoding...................................22
4.2 Selective Broadcast Domain Reduction..................22
5. Co-Existence with Old TRILL switches...................24 Copyright Notice
6. Multi-Access Links with End Stations...................25
7. Summary................................................27 Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
8. Security Considerations................................28 This document is subject to BCP 78 and the IETF Trust's Legal
9. IANA Considerations....................................28 Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Normative References......................................29 Table of Contents
Informative References....................................29
Acknowledgements..........................................31
Authors' Addresses........................................32
INTERNET-DRAFT Multilevel TRILL 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. The Motivation for Multilevel . . . . . . . . . . . . . . 3
1.2. Improvements Due to Multilevel . . . . . . . . . . . . . 4
1.2.1. The Routing Computation Load . . . . . . . . . . . . 4
1.2.2. LSDB Volatility Creating Too Much Control Traffic . . 4
1.2.3. LSDB Volatility Causing To Much Time Unconverged . . 5
1.2.4. The Size Of The LSDB . . . . . . . . . . . . . . . . 5
1.2.5. Nickname Limit . . . . . . . . . . . . . . . . . . . 5
1.2.6. Multi-Destination Traffic . . . . . . . . . . . . . . 6
1.3. Unique and Aggregated Nicknames . . . . . . . . . . . . . 6
1.4. More on Areas . . . . . . . . . . . . . . . . . . . . . . 7
1.5. Terminology and Acronyms . . . . . . . . . . . . . . . . 7
2. Multilevel TRILL Issues . . . . . . . . . . . . . . . . . . . 8
2.1. Non-zero Area Addresses . . . . . . . . . . . . . . . . . 9
2.2. Aggregated versus Unique Nicknames . . . . . . . . . . . 10
2.2.1. More Details on Unique Nicknames . . . . . . . . . . 11
2.2.2. More Details on Aggregated Nicknames . . . . . . . . 12
2.3. Building Multi-Area Trees . . . . . . . . . . . . . . . . 16
2.4. The RPF Check for Trees . . . . . . . . . . . . . . . . . 17
2.5. Area Nickname Acquisition . . . . . . . . . . . . . . . . 17
2.6. Link State Representation of Areas . . . . . . . . . . . 18
3. Area Partition . . . . . . . . . . . . . . . . . . . . . . . 18
4. Multi-Destination Scope . . . . . . . . . . . . . . . . . . . 19
4.1. Unicast to Multi-destination Conversions . . . . . . . . 19
4.1.1. New Tree Encoding . . . . . . . . . . . . . . . . . . 20
4.2. Selective Broadcast Domain Reduction . . . . . . . . . . 21
5. Co-Existence with Old TRILL switches . . . . . . . . . . . . 22
6. Multi-Access Links with End Stations . . . . . . . . . . . . 22
7. Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
8. Security Considerations . . . . . . . . . . . . . . . . . . . 24
9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 24
10. References . . . . . . . . . . . . . . . . . . . . . . . . . 24
10.1. References . . . . . . . . . . . . . . . . . . . . . . . 24
10.2. References . . . . . . . . . . . . . . . . . . . . . . . 25
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 26
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 26
1. Introduction 1. Introduction
The IETF TRILL (Transparent Interconnection of Lot of Links) protocol The IETF TRILL (Transparent Interconnection of Lot of Links) protocol
[RFC6325] [RFC7177] [RFC7780] provides optimal pair-wise data routing [RFC6325] [RFC7177] [RFC7780] provides optimal pair-wise data routing
without configuration, safe forwarding even during periods of without configuration, safe forwarding even during periods of
temporary loops, and support for multipathing of both unicast and temporary loops, and support for multipathing of both unicast and
multicast traffic in networks with arbitrary topology and link multicast traffic in networks with arbitrary topology and link
technology, including multi-access links. TRILL accomplishes this by technology, including multi-access links. TRILL accomplishes this by
using IS-IS (Intermediate System to Intermediate System [IS-IS] using IS-IS (Intermediate System to Intermediate System [IS-IS]
[RFC7176]) link state routing in conjunction with a header that [RFC7176]) link state routing in conjunction with a header that
includes a hop count. The design supports data labels (VLANs and Fine includes a hop count. The design supports data labels (VLANs and
Grained Labels [RFC7172]) and optimization of the distribution of Fine Grained Labels [RFC7172]) and optimization of the distribution
multi-destination data based on data label and multicast group. of multi-destination data based on data label and multicast group.
Devices that implement TRILL are called TRILL Switches or RBridges. Devices that implement TRILL are called TRILL Switches or RBridges.
Familiarity with [IS-IS], [RFC6325], and [RFC7780] is assumed in this Familiarity with [IS-IS], [RFC6325], and [RFC7780] is assumed in this
document. document.
1.1 The Motivation for Multilevel 1.1. The Motivation for Multilevel
The primary motivation for multilevel TRILL is to improve The primary motivation for multilevel TRILL is to improve
scalability. The following issues might limit the scalability of a scalability. The following issues might limit the scalability of a
TRILL-based network: TRILL-based network:
1. The routing computation load 1. The routing computation load
2. The volatility of the link state database (LSDB) creating too much 2. The volatility of the link state database (LSDB) creating too
control traffic much control traffic
3. The volatility of the LSDB causing the TRILL network to be in an 3. The volatility of the LSDB causing the TRILL network to be in an
unconverged state too much of the time unconverged state too much of the time
4. The size of the LSDB 4. The size of the LSDB
5. The limit of the number of TRILL switches, due to the 16-bit 5. The limit of the number of TRILL switches, due to the 16-bit
nickname space (for further information on why this might be a nickname space (for further information on why this might be a
problem, see Section 1.2.5) problem, see Section 1.2.5)
6. The traffic due to upper layer protocols use of broadcast and 6. The traffic due to upper layer protocols use of broadcast and
multicast multicast
7. The size of the end node learning table (the table that remembers 7. The size of the end node learning table (the table that remembers
(egress TRILL switch, label/MAC) pairs) (egress TRILL switch, label/MAC) pairs)
As discussed below, extending TRILL IS-IS to be multilevel As discussed below, extending TRILL IS-IS to be multilevel
(hierarchical) can help with all of these issues except issue 7. (hierarchical) can help with all of these issues except issue 7.
IS-IS was designed to be multilevel [IS-IS]. A network can be IS-IS was designed to be multilevel [IS-IS]. A network can be
partitioned into "areas". Routing within an area is known as "Level partitioned into "areas". Routing within an area is known as "Level
1 routing". Routing between areas is known as "Level 2 routing". 1 routing". Routing between areas is known as "Level 2 routing".
The Level 2 IS-IS network consists of Level 2 routers and links The Level 2 IS-IS network consists of Level 2 routers and links
between the Level 2 routers. Level 2 routers may participate in one between the Level 2 routers. Level 2 routers may participate in one
or more Level 1 areas, in addition to their role as Level 2 routers. or more Level 1 areas, in addition to their role as Level 2 routers.
INTERNET-DRAFT Multilevel TRILL
Each area is connected to Level 2 through one or more "border Each area is connected to Level 2 through one or more "border
routers", which participate both as a router inside the area, and as routers", which participate both as a router inside the area, and as
a router inside the Level 2 "area". Care must be taken that it is a router inside the Level 2 "area". Care must be taken that it is
clear, when transitioning multi-destination packets between Level 2 clear, when transitioning multi-destination packets between Level 2
and a Level 1 area in either direction, that exactly one border TRILL and a Level 1 area in either direction, that exactly one border TRILL
switch will transition a particular data packet between the levels or switch will transition a particular data packet between the levels or
else duplication or loss of traffic can occur. else duplication or loss of traffic can occur.
1.2 Improvements Due to Multilevel 1.2. Improvements Due to Multilevel
Partitioning the network into areas directly solves the first four Partitioning the network into areas directly solves the first four
scalability issues listed above as described in Sections 1.2.1 scalability issues listed above as described in Sections 1.2.1
through 1.2.4. Multilevel also contributes to solving issues 5 and 6 through 1.2.4. Multilevel also contributes to solving issues 5 and 6
as discussed in Section 1.2.5 and 1.2.6 respectively. as discussed in Section 1.2.5 and 1.2.6 respectively.
In the subsections below, N indicates the number of TRILL switches in In the subsections below, N indicates the number of TRILL switches in
a TRILL campus. As a simplifying assumption, it is assumed that each a TRILL campus. As a simplifying assumption, it is assumed that each
TRILL switch has k links to other TRILL switches. An "optimized" TRILL switch has k links to other TRILL switches. An "optimized"
multilevel campus is assumed to have Level 1 areas containing sqrt(N) multilevel campus is assumed to have Level 1 areas containing sqrt(N)
switches. switches.
1.2.1. The Routing Computation Load 1.2.1. The Routing Computation Load
The Dijkstra algorithm uses computational effort on the order of the The Dijkstra algorithm uses computational effort on the order of the
number of links in a network (N*k) times the log of the number of number of links in a network (N*k) times the log of the number of
nodes to calculate least cost routes at a router (Section 12.3.3 nodes to calculate least cost routes at a router (Section 12.3.3
[InterCon]). Thus, in a single level TRILL campus, it is on the order [InterCon]). Thus, in a single level TRILL campus, it is on the
of N*k*log(N). In an optimized multilevel campus, it is on the order order of N*k*log(N). In an optimized multilevel campus, it is on the
of sqrt(N)*k*log(N). So, for example, assuming N is 3,000, the level order of sqrt(N)*k*log(N). So, for example, assuming N is 3,000, the
of computational effort would be reduced by about a factor of 50. level of computational effort would be reduced by about a factor of
50.
1.2.2. LSDB Volatility Creating Too Much Control Traffic 1.2.2. LSDB Volatility Creating Too Much Control Traffic
The rate of LSDB changes is assumed to be approximately proportional The rate of LSDB changes is assumed to be approximately proportional
to the number of routers and links in the TRILL campus or N*(1+k) for to the number of routers and links in the TRILL campus or N*(1+k) for
a single level campus. With an optimized multilevel campus, each area a single level campus. With an optimized multilevel campus, each
would have about sqrt(N) routers and proportionately fewer links area would have about sqrt(N) routers and proportionately fewer links
reducing the rate of LSDB changes by about a factor of sqrt(N). reducing the rate of LSDB changes by about a factor of sqrt(N).
INTERNET-DRAFT Multilevel TRILL 1.2.3. LSDB Volatility Causing To Much Time Unconverged
1.2.3. LSDB Volatility Causing To Much Time Unconverged
With the simplifying assumption that routing converges after each With the simplifying assumption that routing converges after each
topology change before the next such change, the fraction of time topology change before the next such change, the fraction of time
that routing is unconverged is proportional to the product of the that routing is unconverged is proportional to the product of the
rate of change occurrence and the convergence time. The rate of rate of change occurrence and the convergence time. The rate of
topology changes per some arbitrary unit of time will be roughly topology changes per some arbitrary unit of time will be roughly
proportional to the number of router and links (Section 1.2.2). The proportional to the number of router and links (Section 1.2.2). The
convergence time is approximately proportional to the computation convergence time is approximately proportional to the computation
involved at each router (Section 1.2.1). Thus, based on these involved at each router (Section 1.2.1). Thus, based on these
simplifying assumptions, the time spent unconverged in a single level simplifying assumptions, the time spent unconverged in a single level
network is proportional to (N*(1+k))*(N*k*log(N)) while that time for network is proportional to (N*(1+k))*(N*k*log(N)) while that time for
an optimized multilevel network would be proportional to an optimized multilevel network would be proportional to
(sqrt(N)*(1+k))*(sqrt(N)*k*log(N)). Thus, in changing to multilevel, (sqrt(N)*(1+k))*(sqrt(N)*k*log(N)). Thus, in changing to multilevel,
the time spent unconverged, using these simplifying assumptions, is the time spent unconverged, using these simplifying assumptions, is
improved by about a factor of N. improved by about a factor of N.
1.2.4. The Size Of The LSDB 1.2.4. The Size Of The LSDB
The size of the LSDB, which consists primarily of information about The size of the LSDB, which consists primarily of information about
routers (TRILL switches) and links, is also approximately routers (TRILL switches) and links, is also approximately
proportional to the number of routers and links. So, as with item 2 proportional to the number of routers and links. So, as with item 2
in Section 1.2.2 above, it should improve by about a factor of in Section 1.2.2 above, it should improve by about a factor of
sqrt(N) in going from single to multilevel. sqrt(N) in going from single to multilevel.
1.2.5 Nickname Limit 1.2.5. Nickname Limit
For many TRILL protocol purposes, RBridges are designated by 16-bit For many TRILL protocol purposes, RBridges are designated by 16-bit
nicknames. While some values are reserved, this appears to provide nicknames. While some values are reserved, this appears to provide
enough nicknames to designated over 65,000 RBridges. However, this enough nicknames to designated over 65,000 RBridges. However, this
number is effectively reduced by the following two factors: number is effectively reduced by the following two factors:
- Nicknames are consumed when pseudo-nicknames are used for the - Nicknames are consumed when pseudo-nicknames are used for the
active-active connection of end stations. Using the techniques in active-active connection of end stations. Using the techniques
[RFC7781], for example, could double the nickname consumption if in [RFC7781], for example, could double the nickname
there are extensive active-active edge groups connected to consumption if there are extensive active-active edge groups
different sets of edge TRILL switch ports. connected to different sets of edge TRILL switch ports.
- There might be problems in multilevel campus wide contention for
single nickname allocation of nicknames were allocated
individually from a single pool for the entire campus. Thus it
seems likely that a hierarchical method would be chosen where
blocks of nicknames are allocated at Level 2 to Level 1 areas and
contention for a nickname by an RBridge in such a Level 1 area
would be only within that area. Such hierarchical allocation leads
to further effective loss of nicknames similar to the situation
INTERNET-DRAFT Multilevel TRILL
with IP addresses discussed in [RFC3194]. - There might be problems in multilevel campus wide contention
for single nickname allocation of nicknames were allocated
individually from a single pool for the entire campus. Thus it
seems likely that a hierarchical method would be chosen where
blocks of nicknames are allocated at Level 2 to Level 1 areas
and contention for a nickname by an RBridge in such a Level 1
area would be only within that area. Such hierarchical
allocation leads to further effective loss of nicknames similar
to the situation with IP addresses discussed in [RFC3194].
Even without the above effective reductions in nickname space, a very Even without the above effective reductions in nickname space, a very
large multilevel TRILL campus, say one with 200 areas each containing large multilevel TRILL campus, say one with 200 areas each containing
500 TRILL switches, could require 100,000 or more nicknames if all 500 TRILL switches, could require 100,000 or more nicknames if all
nicknames in the campus must be unique, which is clearly impossible nicknames in the campus must be unique, which is clearly impossible
with 16-bit nicknames. with 16-bit nicknames.
This scaling limit, namely, 16-bit nickname space, will only be This scaling limit, namely, 16-bit nickname space, will only be
addressed with the aggregated nickname approach. Since the aggregated addressed with the aggregated nickname approach. Since the
nickname approach requires some complexity in the border TRILL aggregated nickname approach requires some complexity in the border
switches (for rewriting the nicknames in the TRILL header), the TRILL switches (for rewriting the nicknames in the TRILL header), the
suggested design in this document allows a campus with a mixture of suggested design in this document allows a campus with a mixture of
unique-nickname areas, and aggregated-nickname areas. Thus a TRILL unique-nickname areas, and aggregated-nickname areas. Thus a TRILL
network could start using multilevel with the simpler unique nickname network could start using multilevel with the simpler unique nickname
method and later add aggregated areas as a later stage of network method and later add aggregated areas as a later stage of network
growth. growth.
With this design, nicknames must be unique across all Level 2 and With this design, nicknames must be unique across all Level 2 and
unique-nickname area TRILL switches taken together, whereas nicknames unique-nickname area TRILL switches taken together, whereas nicknames
inside an aggregated-nickname area are visible only inside that area. inside an aggregated-nickname area are visible only inside that area.
Nicknames inside an aggregated-nickname area must still not conflict Nicknames inside an aggregated-nickname area must still not conflict
with nicknames visible in Level 2 (which includes all nicknames with nicknames visible in Level 2 (which includes all nicknames
inside unique nickname areas), but the nicknames inside an inside unique nickname areas), but the nicknames inside an
aggregated-nickname area may be the same as nicknames used within one aggregated-nickname area may be the same as nicknames used within one
or more other aggregated-nickname areas. or more other aggregated-nickname areas.
With the design suggested in this document, TRILL switches within an With the design suggested in this document, TRILL switches within an
area need not be aware of whether they are in an aggregated nickname area need not be aware of whether they are in an aggregated nickname
area or a unique nickname area. The border TRILL switches in area A1 area or a unique nickname area. The border TRILL switches in area A1
will indicate, in their LSP inside area A1, which nicknames (or will indicate, in their LSP inside area A1, which nicknames (or
nickname ranges) are available, or alternatively which nicknames are nickname ranges) are available, or alternatively which nicknames are
not available, for choosing as nicknames by area A1 TRILL switches. not available, for choosing as nicknames by area A1 TRILL switches.
1.2.6 Multi-Destination Traffic 1.2.6. Multi-Destination Traffic
Scaling limits due to protocol use of broadcast and multicast, can be Scaling limits due to protocol use of broadcast and multicast, can be
addressed in many cases in a multilevel campus by introducing addressed in many cases in a multilevel campus by introducing
locally-scoped multi-destination delivery, limited to an area or a locally-scoped multi-destination delivery, limited to an area or a
single link. See further discussion of this issue in Section 4.2. single link. See further discussion of this issue in Section 4.2.
1.3 Unique and Aggregated Nicknames 1.3. Unique and Aggregated Nicknames
We describe two alternatives for hierarchical or multilevel TRILL. We describe two alternatives for hierarchical or multilevel TRILL.
One we call the "unique nickname" alternative. The other we call the One we call the "unique nickname" alternative. The other we call the
"aggregated nickname" alternative. In the aggregated nickname "aggregated nickname" alternative. In the aggregated nickname
INTERNET-DRAFT Multilevel TRILL
alternative, border TRILL switches replace either the ingress or alternative, border TRILL switches replace either the ingress or
egress nickname field in the TRILL header of unicast packets with an egress nickname field in the TRILL header of unicast packets with an
aggregated nickname representing an entire area. aggregated nickname representing an entire area.
The unique nickname alternative has the advantage that border TRILL The unique nickname alternative has the advantage that border TRILL
switches are simpler and do not need to do TRILL Header nickname switches are simpler and do not need to do TRILL Header nickname
modification. It also simplifies testing and maintenance operations modification. It also simplifies testing and maintenance operations
that originate in one area and terminate in a different area. that originate in one area and terminate in a different area.
The aggregated nickname alternative has the following advantages: The aggregated nickname alternative has the following advantages:
o it solves scaling problem #5 above, the 16-bit nickname limit, - it solves scaling problem #5 above, the 16-bit nickname limit,
in a simple way, in a simple way,
o it lessens the amount of inter-area routing information that - it lessens the amount of inter-area routing information that
must be passed in IS-IS, and must be passed in IS-IS, and
o it logically reduces the RPF (Reverse Path Forwarding) Check - it logically reduces the RPF (Reverse Path Forwarding) Check
information (since only the area nickname needs to appear, information (since only the area nickname needs to appear,
rather than all the ingress TRILL switches in that area). rather than all the ingress TRILL switches in that area).
In both cases, it is possible and advantageous to compute multi- In both cases, it is possible and advantageous to compute multi-
destination data packet distribution trees such that the portion destination data packet distribution trees such that the portion
computed within a given area is rooted within that area. computed within a given area is rooted within that area.
For further discussion of the unique and aggregated nickname For further discussion of the unique and aggregated nickname
alternatives, see Section 2.2. alternatives, see Section 2.2.
1.4 More on Areas 1.4. More on Areas
Each area is configured with an "area address", which is advertised Each area is configured with an "area address", which is advertised
in IS-IS messages, so as to avoid accidentally interconnecting areas. in IS-IS messages, so as to avoid accidentally interconnecting areas.
For TRILL the only purpose of the area address would be to avoid For TRILL the only purpose of the area address would be to avoid
accidentally interconnecting areas although the area address had accidentally interconnecting areas although the area address had
other purposes in CLNP (Connectionless Network Layer Protocol), IS-IS other purposes in CLNP (Connectionless Network Layer Protocol), IS-IS
was originally designed for CLNP/DECnet. was originally designed for CLNP/DECnet.
Currently, the TRILL specification says that the area address must be Currently, the TRILL specification says that the area address must be
zero. If we change the specification so that the area address value zero. If we change the specification so that the area address value
of zero is just a default, then most of IS-IS multilevel machinery of zero is just a default, then most of IS-IS multilevel machinery
works as originally designed. However, there are TRILL-specific works as originally designed. However, there are TRILL-specific
issues, which we address below in Section 2.1. issues, which we address below in Section 2.1.
1.5 Terminology and Acronyms 1.5. Terminology and Acronyms
This document generally uses the acronyms defined in [RFC6325] plus This document generally uses the acronyms defined in [RFC6325] plus
the additional acronym DBRB. However, for ease of reference, most the additional acronym DBRB. However, for ease of reference, most
acronyms used are listed here: acronyms used are listed here:
INTERNET-DRAFT Multilevel TRILL
CLNP - ConnectionLess Network Protocol CLNP - ConnectionLess Network Protocol
DECnet - a proprietary routing protocol that was used by Digital DECnet - a proprietary routing protocol that was used by Digital
Equipment Corporation. "DECnet Phase 5" was the origin of IS-IS. Equipment Corporation. "DECnet Phase 5" was the origin of IS-IS.
Data Label - VLAN or Fine Grained Label [RFC7172] Data Label - VLAN or Fine Grained Label [RFC7172]
DBRB - Designated Border RBridge DBRB - Designated Border RBridge
ESADI - End Station Address Distribution Information ESADI - End Station Address Distribution Information
IS-IS - Intermediate System to Intermediate System [IS-IS] IS-IS - Intermediate System to Intermediate System [IS-IS]
LSDB - Link State Data Base LSDB - Link State Data Base
skipping to change at page 10, line 5 skipping to change at page 8, line 35
TLV - Type Length Value TLV - Type Length Value
TRILL - Transparent Interconnection of Lots of Links or Tunneled TRILL - Transparent Interconnection of Lots of Links or Tunneled
Routing in the Link Layer [RFC6325] [RFC7780] Routing in the Link Layer [RFC6325] [RFC7780]
TRILL switch - a device that implements the TRILL protocol TRILL switch - a device that implements the TRILL protocol
[RFC6325] [RFC7780], sometimes called an RBridge [RFC6325] [RFC7780], sometimes called an RBridge
VLAN - Virtual Local Area Network VLAN - Virtual Local Area Network
INTERNET-DRAFT Multilevel TRILL 2. Multilevel TRILL Issues
2. Multilevel TRILL Issues
The TRILL-specific issues introduced by multilevel include the The TRILL-specific issues introduced by multilevel include the
following: following:
a. Configuration of non-zero area addresses, encoding them in IS-IS a. Configuration of non-zero area addresses, encoding them in IS-IS
PDUs, and possibly interworking with old TRILL switches that do PDUs, and possibly interworking with old TRILL switches that do
not understand non-zero area addresses. not understand non-zero area addresses.
See Section 2.1.
b. Nickname management. See Section 2.1.
See Sections 2.5 and 2.2. b. Nickname management.
c. Advertisement of pruning information (Data Label reachability, IP See Sections 2.5 and 2.2.
multicast addresses) across areas.
Distribution tree pruning information is only an optimization, c. Advertisement of pruning information (Data Label reachability, IP
as long as multi-destination packets are not prematurely multicast addresses) across areas.
pruned. For instance, border TRILL switches could advertise
they can reach all possible Data Labels, and have an IP
multicast router attached. This would cause all multi-
destination traffic to be transmitted to border TRILL switches,
and possibly pruned there, when the traffic could have been
pruned earlier based on Data Label or multicast group if border
TRILL switches advertised more detailed Data Label and/or
multicast listener and multicast router attachment information.
d. Computation of distribution trees across areas for multi- Distribution tree pruning information is only an optimization, as
destination data. long as multi-destination packets are not prematurely pruned.
For instance, border TRILL switches could advertise they can
reach all possible Data Labels, and have an IP multicast router
attached. This would cause all multi- destination traffic to be
transmitted to border TRILL switches, and possibly pruned there,
when the traffic could have been pruned earlier based on Data
Label or multicast group if border TRILL switches advertised more
detailed Data Label and/or multicast listener and multicast
router attachment information.
See Section 2.3. d. Computation of distribution trees across areas for multi-
destination data.
e. Computation of RPF information for those distribution trees. See Section 2.3.
See Section 2.4. e. Computation of RPF information for those distribution trees.
f. Computation of pruning information across areas. See Section 2.4.
See Sections 2.3 and 2.6. f. Computation of pruning information across areas.
g. Compatibility, as much as practical, with existing, unmodified See Sections 2.3 and 2.6.
TRILL switches.
The most important form of compatibility is with existing TRILL g. Compatibility, as much as practical, with existing, unmodified
fast path hardware. Changes that require upgrade to the slow TRILL switches.
path firmware/software are more tolerable. Compatibility for
the relatively small number of border TRILL switches is less
important than compatibility for non-border TRILL switches.
INTERNET-DRAFT Multilevel TRILL The most important form of compatibility is with existing TRILL
fast path hardware. Changes that require upgrade to the slow
path firmware/software are more tolerable. Compatibility for the
relatively small number of border TRILL switches is less
important than compatibility for non-border TRILL switches.
See Section 5. See Section 5.
2.1 Non-zero Area Addresses 2.1. Non-zero Area Addresses
The current TRILL base protocol specification [RFC6325] [RFC7177] The current TRILL base protocol specification [RFC6325] [RFC7177]
[RFC7780] says that the area address in IS-IS must be zero. The [RFC7780] says that the area address in IS-IS must be zero. The
purpose of the area address is to ensure that different areas are not purpose of the area address is to ensure that different areas are not
accidentally merged. Furthermore, zero is an invalid area address accidentally merged. Furthermore, zero is an invalid area address
for layer 3 IS-IS, so it was chosen as an additional safety mechanism for layer 3 IS-IS, so it was chosen as an additional safety mechanism
to ensure that layer 3 IS-IS packets would not be confused with TRILL to ensure that layer 3 IS-IS packets would not be confused with TRILL
IS-IS packets. However, TRILL uses other techniques to avoid IS-IS packets. However, TRILL uses other techniques to avoid
confusion on a link, such as different multicast addresses and confusion on a link, such as different multicast addresses and
Ethertypes on Ethernet [RFC6325], different PPP (Point-to-Point Ethertypes on Ethernet [RFC6325], different PPP (Point-to-Point
Protocol) code points on PPP [RFC6361], and the like. Thus, using an Protocol) code points on PPP [RFC6361], and the like. Thus, using an
area address in TRILL that might be used in layer 3 IS-IS is not a area address in TRILL that might be used in layer 3 IS-IS is not a
problem. problem.
Since current TRILL switches will reject any IS-IS messages with non- Since current TRILL switches will reject any IS-IS messages with non-
zero area addresses, the choices are as follows: zero area addresses, the choices are as follows:
a.1 upgrade all TRILL switches that are to interoperate in a a.1 upgrade all TRILL switches that are to interoperate in a
potentially multilevel environment to understand non-zero area potentially multilevel environment to understand non-zero area
addresses, addresses,
a.2 neighbors of old TRILL switches must remove the area address from a.2 neighbors of old TRILL switches must remove the area address from
skipping to change at page 11, line 31 skipping to change at page 10, line 14
area address in TRILL that might be used in layer 3 IS-IS is not a area address in TRILL that might be used in layer 3 IS-IS is not a
problem. problem.
Since current TRILL switches will reject any IS-IS messages with non- Since current TRILL switches will reject any IS-IS messages with non-
zero area addresses, the choices are as follows: zero area addresses, the choices are as follows:
a.1 upgrade all TRILL switches that are to interoperate in a a.1 upgrade all TRILL switches that are to interoperate in a
potentially multilevel environment to understand non-zero area potentially multilevel environment to understand non-zero area
addresses, addresses,
a.2 neighbors of old TRILL switches must remove the area address from a.2 neighbors of old TRILL switches must remove the area address from
IS-IS messages when talking to an old TRILL switch (which might IS-IS messages when talking to an old TRILL switch (which might
break IS-IS security and/or cause inadvertent merging of areas), break IS-IS security and/or cause inadvertent merging of areas),
a.3 ignore the problem of accidentally merging areas entirely, or a.3 ignore the problem of accidentally merging areas entirely, or
a.4 keep the fixed "area address" field as 0 in TRILL, and add a new, a.4 keep the fixed "area address" field as 0 in TRILL, and add a
optional TLV for "area name" to Hellos that, if present, could be new, optional TLV for "area name" to Hellos that, if present,
compared, by new TRILL switches, to prevent accidental area could be compared, by new TRILL switches, to prevent accidental
merging. area merging.
In principal, different solutions could be used in different areas In principal, different solutions could be used in different areas
but it would be much simpler to adopt one of these choices uniformly. but it would be much simpler to adopt one of these choices uniformly.
A simple solution would be a.1 above with each TRILL switch using a A simple solution would be a.1 above with each TRILL switch using a
dominant area nickname as its area address. For the unique nickname dominant area nickname as its area address. For the unique nickname
alternative, the dominant nickname could be the lowest value nickname alternative, the dominant nickname could be the lowest value nickname
held by any border RBridge of the area. For the aggregated nickname held by any border RBridge of the area. For the aggregated nickname
alternative, it could be the lowest nickname held by a border RBridge alternative, it could be the lowest nickname held by a border RBridge
of the area or a nickname representing the area. of the area or a nickname representing the area.
2.2 Aggregated versus Unique Nicknames 2.2. Aggregated versus Unique Nicknames
In the unique nickname alternative, all nicknames across the campus In the unique nickname alternative, all nicknames across the campus
must be unique. In the aggregated nickname alternative, TRILL switch must be unique. In the aggregated nickname alternative, TRILL switch
nicknames within an aggregated area are only of local significance, nicknames within an aggregated area are only of local significance,
INTERNET-DRAFT Multilevel TRILL
and the only nickname externally (outside that area) visible is the and the only nickname externally (outside that area) visible is the
"area nickname" (or nicknames), which aggregates all the internal "area nickname" (or nicknames), which aggregates all the internal
nicknames. nicknames.
The unique nickname approach simplifies border TRILL switches. The unique nickname approach simplifies border TRILL switches.
The aggregated nickname approach eliminates the potential problem of The aggregated nickname approach eliminates the potential problem of
nickname exhaustion, minimizes the amount of nickname information nickname exhaustion, minimizes the amount of nickname information
that would need to be forwarded between areas, minimizes the size of that would need to be forwarded between areas, minimizes the size of
the forwarding table, and simplifies RPF calculation and RPF the forwarding table, and simplifies RPF calculation and RPF
information. information.
2.2.1 More Details on Unique Nicknames 2.2.1. More Details on Unique Nicknames
With unique cross-area nicknames, it would be intractable to have a With unique cross-area nicknames, it would be intractable to have a
flat nickname space with TRILL switches in different areas contending flat nickname space with TRILL switches in different areas contending
for the same nicknames. Instead, each area would need to be for the same nicknames. Instead, each area would need to be
configured with or allocate one or more block of nicknames. Either configured with or allocate one or more block of nicknames. Either
some TRILL switches would need to announce that all the nicknames some TRILL switches would need to announce that all the nicknames
other than that in blocks available to the area are taken (to prevent other than that in blocks available to the area are taken (to prevent
the TRILL switches inside the area from choosing nicknames outside the TRILL switches inside the area from choosing nicknames outside
the area's nickname block), or a new TLV would be needed to announce the area's nickname block), or a new TLV would be needed to announce
the allowable or the prohibited nicknames, and all TRILL switches in the allowable or the prohibited nicknames, and all TRILL switches in
the area would need to understand that new TLV. the area would need to understand that new TLV.
Currently the encoding of nickname information in TLVs is by listing Currently the encoding of nickname information in TLVs is by listing
of individual nicknames; this would make it painful for a border of individual nicknames; this would make it painful for a border
TRILL switch to announce into an area that it is holding all other TRILL switch to announce into an area that it is holding all other
nicknames to limit the nicknames available within that area. Painful nicknames to limit the nicknames available within that area. Painful
means tens of thousands of individual nickname entries in the Level 1 means tens of thousands of individual nickname entries in the Level 1
LSDB. The information could be encoded as ranges of nicknames to make LSDB. The information could be encoded as ranges of nicknames to
this manageable by specifying a new TLV similar to the Nickname Flags make this manageable by specifying a new TLV similar to the Nickname
APPsub-TLV specified in [RFC7780] but providing flags for blocks of Flags APPsub-TLV specified in [RFC7780] but providing flags for
nicknames rather than single nicknames. Although this would require blocks of nicknames rather than single nicknames. Although this
updating software, such a new TLV is the preferred method. would require updating software, such a new TLV is the preferred
method.
There is also an issue with the unique nicknames approach in building There is also an issue with the unique nicknames approach in building
distribution trees, as follows: distribution trees, as follows:
With unique nicknames in the TRILL campus and TRILL header With unique nicknames in the TRILL campus and TRILL header
nicknames not rewritten by the border TRILL switches, there would nicknames not rewritten by the border TRILL switches, there would
have to be globally known nicknames for the trees. Suppose there have to be globally known nicknames for the trees. Suppose there
are k trees. For all of the trees with nicknames located outside are k trees. For all of the trees with nicknames located outside
an area, the local trees would be rooted at a border TRILL switch an area, the local trees would be rooted at a border TRILL switch
or switches. Therefore, there would be either no splitting of or switches. Therefore, there would be either no splitting of
multi-destination traffic within the area or restricted splitting multi-destination traffic within the area or restricted splitting
of multi-destination traffic between trees rooted at a highly of multi-destination traffic between trees rooted at a highly
restricted set of TRILL switches. restricted set of TRILL switches.
INTERNET-DRAFT Multilevel TRILL
As an alternative, just the "egress nickname" field of multi- As an alternative, just the "egress nickname" field of multi-
destination TRILL Data packets could be mapped at the border, destination TRILL Data packets could be mapped at the border,
leaving known unicast packets un-mapped. However, this surrenders leaving known unicast packets un-mapped. However, this surrenders
much of the unique nickname advantage of simpler border TRILL much of the unique nickname advantage of simpler border TRILL
switches. switches.
Scaling to a very large campus with unique nicknames might exhaust Scaling to a very large campus with unique nicknames might exhaust
the 16-bit TRILL nicknames space particularly if (1) additional the 16-bit TRILL nicknames space particularly if (1) additional
nicknames are consumed to support active-active end station groups at nicknames are consumed to support active-active end station groups at
the TRILL edge using the techniques standardized in [RFC7781] and (2) the TRILL edge using the techniques standardized in [RFC7781] and (2)
use of the nickname space is less efficient due to the allocation of, use of the nickname space is less efficient due to the allocation of,
for example, power-of-two size blocks of nicknames to areas in the for example, power-of-two size blocks of nicknames to areas in the
same way that use of the IP address space is made less efficient by same way that use of the IP address space is made less efficient by
hierarchical allocation (see [RFC3194]). One method to avoid nickname hierarchical allocation (see [RFC3194]). One method to avoid
exhaustion might be to expand nicknames to 24 bits; however, that nickname exhaustion might be to expand nicknames to 24 bits; however,
technique would require TRILL message format and fast path processing that technique would require TRILL message format and fast path
changes and that all TRILL switches in the campus understand larger processing changes and that all TRILL switches in the campus
nicknames. understand larger nicknames.
2.2.2 More Details on Aggregated Nicknames 2.2.2. More Details on Aggregated Nicknames
The aggregated nickname approach enables passing far less nickname The aggregated nickname approach enables passing far less nickname
information. It works as follows, assuming both the source and information. It works as follows, assuming both the source and
destination areas are using aggregated nicknames: destination areas are using aggregated nicknames:
There are at least two ways areas could be identified. There are at least two ways areas could be identified.
One method would be to assign each area a 16-bit nickname. This One method would be to assign each area a 16-bit nickname. This
would not be the nickname of any actual TRILL switch. Instead, it would not be the nickname of any actual TRILL switch. Instead, it
would be the nickname of the area itself. Border TRILL switches would be the nickname of the area itself. Border TRILL switches
would know the area nickname for their own area(s). For an would know the area nickname for their own area(s). For an
example of a more specific multilevel proposal using unique example of a more specific multilevel proposal using unique
nicknames, see [DraftUnique]. nicknames, see [DraftUnique].
Alternatively, areas could be identified by the set of nicknames Alternatively, areas could be identified by the set of nicknames
that identify the border routers for that area. (See [SingleName] that identify the border routers for that area. (See [SingleName]
for a multilevel proposal using such a set of nicknames.) for a multilevel proposal using such a set of nicknames.)
The TRILL Header nickname fields in TRILL Data packets being The TRILL Header nickname fields in TRILL Data packets being
transported through a multilevel TRILL campus with aggregated transported through a multilevel TRILL campus with aggregated
nicknames are as follows: nicknames are as follows:
- When both the ingress and egress TRILL switches are in the same - When both the ingress and egress TRILL switches are in the same
area, there need be no change from the existing base TRILL area, there need be no change from the existing base TRILL
protocol standard in the TRILL Header nickname fields. protocol standard in the TRILL Header nickname fields.
- When being transported between different Level 1 areas in Level
2, the ingress nickname is a nickname of the ingress TRILL
INTERNET-DRAFT Multilevel TRILL
switch's area while the egress nickname is either a nickname of - When being transported between different Level 1 areas in Level
the egress TRILL switch's area or a tree nickname. 2, the ingress nickname is a nickname of the ingress TRILL
switch's area while the egress nickname is either a nickname of
the egress TRILL switch's area or a tree nickname.
- When being transported from Level 1 to Level 2, the ingress - When being transported from Level 1 to Level 2, the ingress
nickname is the nickname of the ingress TRILL switch itself nickname is the nickname of the ingress TRILL switch itself
while the egress nickname is either a nickname for the area of while the egress nickname is either a nickname for the area of
the egress TRILL switch or a tree nickname. the egress TRILL switch or a tree nickname.
- When being transported from Level 2 to Level 1, the ingress - When being transported from Level 2 to Level 1, the ingress
nickname is a nickname for the ingress TRILL switch's area while nickname is a nickname for the ingress TRILL switch's area
the egress nickname is either the nickname of the egress TRILL while the egress nickname is either the nickname of the egress
switch itself or a tree nickname. TRILL switch itself or a tree nickname.
There are two variations of the aggregated nickname approach. The There are two variations of the aggregated nickname approach. The
first is the Border Learning approach, which is described in Section first is the Border Learning approach, which is described in
2.2.2.1. The second is the Swap Nickname Field approach, which is Section 2.2.2.1. The second is the Swap Nickname Field approach,
described in Section 2.2.2.2. Section 2.2.2.3 compares the advantages which is described in Section 2.2.2.2. Section 2.2.2.3 compares the
and disadvantages of these two variations of the aggregated nickname advantages and disadvantages of these two variations of the
approach. aggregated nickname approach.
2.2.2.1 Border Learning Aggregated Nicknames 2.2.2.1. Border Learning Aggregated Nicknames
This section provides an illustrative example and description of the This section provides an illustrative example and description of the
border learning variation of aggregated nicknames where a single border learning variation of aggregated nicknames where a single
nickname is used to identify an area. nickname is used to identify an area.
In the following picture, RB2 and RB3 are area border TRILL switches In the following picture, RB2 and RB3 are area border TRILL switches
(RBridges). A source S is attached to RB1. The two areas have (RBridges). A source S is attached to RB1. The two areas have
nicknames 15961 and 15918, respectively. RB1 has a nickname, say 27, nicknames 15961 and 15918, respectively. RB1 has a nickname, say 27,
and RB4 has a nickname, say 44 (and in fact, they could even have the and RB4 has a nickname, say 44 (and in fact, they could even have the
same nickname, since the TRILL switch nickname will not be visible same nickname, since the TRILL switch nickname will not be visible
skipping to change at page 14, line 53 skipping to change at page 13, line 43
| S--RB1---Rx--Rz----RB2---Rb---Rc--Rd---Re--RB3---Rk--RB4---D | | S--RB1---Rx--Rz----RB2---Rb---Rc--Rd---Re--RB3---Rk--RB4---D |
| 27 | | | | 44 | | 27 | | | | 44 |
| | | | | | | | | | | |
+-------------------+ +-----------------+ +--------------+ +-------------------+ +-----------------+ +--------------+
Let's say that S transmits a frame to destination D, which is Let's say that S transmits a frame to destination D, which is
connected to RB4, and let's say that D's location has already been connected to RB4, and let's say that D's location has already been
learned by the relevant TRILL switches. These relevant switches have learned by the relevant TRILL switches. These relevant switches have
learned the following: learned the following:
1) RB1 has learned that D is connected to nickname 15918 1) RB1 has learned that D is connected to nickname 15918 2) RB3 has
2) RB3 has learned that D is attached to nickname 44. learned that D is attached to nickname 44.
INTERNET-DRAFT Multilevel TRILL
The following sequence of events will occur: The following sequence of events will occur:
- S transmits an Ethernet frame with source MAC = S and destination - S transmits an Ethernet frame with source MAC = S and destination
MAC = D. MAC = D.
- RB1 encapsulates with a TRILL header with ingress RBridge = 27, - RB1 encapsulates with a TRILL header with ingress RBridge = 27,
and egress = 15918 producing a TRILL Data packet. and egress = 15918 producing a TRILL Data packet.
- RB2 has announced in the Level 1 IS-IS instance in area 15961, - RB2 has announced in the Level 1 IS-IS instance in area 15961,
skipping to change at page 15, line 45 skipping to change at page 14, line 41
destination area, the ingress nickname will be 15961 and the destination area, the ingress nickname will be 15961 and the
egress nickname will be 44. egress nickname will be 44.
- RB4, when decapsulating, learns that S is attached to nickname - RB4, when decapsulating, learns that S is attached to nickname
15961, which is the area nickname of the ingress. 15961, which is the area nickname of the ingress.
Now suppose that D's location has not been learned by RB1 and/or RB3. Now suppose that D's location has not been learned by RB1 and/or RB3.
What will happen, as it would in TRILL today, is that RB1 will What will happen, as it would in TRILL today, is that RB1 will
forward the packet as multi-destination, choosing a tree. As the forward the packet as multi-destination, choosing a tree. As the
multi-destination packet transitions into Level 2, RB2 replaces the multi-destination packet transitions into Level 2, RB2 replaces the
ingress nickname with the area nickname. If RB1 does not know the ingress nickname with the area nickname. If RB1 does not know the
location of D, the packet must be flooded, subject to possible location of D, the packet must be flooded, subject to possible
pruning, in Level 2 and, subject to possible pruning, from Level 2 pruning, in Level 2 and, subject to possible pruning, from Level 2
into every Level 1 area that it reaches on the Level 2 distribution into every Level 1 area that it reaches on the Level 2 distribution
tree. tree.
Now suppose that RB1 has learned the location of D (attached to Now suppose that RB1 has learned the location of D (attached to
nickname 15918), but RB3 does not know where D is. In that case, RB3 nickname 15918), but RB3 does not know where D is. In that case, RB3
must turn the packet into a multi-destination packet within area must turn the packet into a multi-destination packet within area
15918. In this case, care must be taken so that in the case in which 15918. In this case, care must be taken so that in the case in which
RB3 is not the Designated transitioner between Level 2 and its area RB3 is not the Designated transitioner between Level 2 and its area
for that multi-destination packet, but was on the unicast path, that for that multi-destination packet, but was on the unicast path, that
INTERNET-DRAFT Multilevel TRILL
border TRILL switch in that area does not forward the now multi- border TRILL switch in that area does not forward the now multi-
destination packet back into Level 2. Therefore, it would be destination packet back into Level 2. Therefore, it would be
desirable to have a marking, somehow, that indicates the scope of desirable to have a marking, somehow, that indicates the scope of
this packet's distribution to be "only this area" (see also Section this packet's distribution to be "only this area" (see also
4). Section 4).
In cases where there are multiple transitioners for unicast packets, In cases where there are multiple transitioners for unicast packets,
the border learning mode of operation requires that the address the border learning mode of operation requires that the address
learning between them be shared by some protocol such as running learning between them be shared by some protocol such as running
ESADI [RFC7357] for all Data Labels of interest to avoid excessive ESADI [RFC7357] for all Data Labels of interest to avoid excessive
unknown unicast flooding. unknown unicast flooding.
The potential issue described at the end of Section 2.2.1 with trees The potential issue described at the end of Section 2.2.1 with trees
in the unique nickname alternative is eliminated with aggregated in the unique nickname alternative is eliminated with aggregated
nicknames. With aggregated nicknames, each border TRILL switch that nicknames. With aggregated nicknames, each border TRILL switch that
will transition multi-destination packets can have a mapping between will transition multi-destination packets can have a mapping between
Level 2 tree nicknames and Level 1 tree nicknames. There need not Level 2 tree nicknames and Level 1 tree nicknames. There need not
even be agreement about the total number of trees; just that the even be agreement about the total number of trees; just that the
border TRILL switch have some mapping, and replace the egress TRILL border TRILL switch have some mapping, and replace the egress TRILL
switch nickname (the tree name) when transitioning levels. switch nickname (the tree name) when transitioning levels.
2.2.2.2 Swap Nickname Field Aggregated Nicknames 2.2.2.2. Swap Nickname Field Aggregated Nicknames
There is a variant possibility where two additional fields could There is a variant possibility where two additional fields could
exist in TRILL Data packets that could be called the "ingress swap exist in TRILL Data packets that could be called the "ingress swap
nickname field" and the "egress swap nickname field". This variant is nickname field" and the "egress swap nickname field". This variant
described below for completeness but would require fast path hardware is described below for completeness but would require fast path
changes from the existing TRILL protocol. The changes in the example hardware changes from the existing TRILL protocol. The changes in
above would be as follows: the example above would be as follows:
- RB1 will have learned the area nickname of D and the TRILL switch - RB1 will have learned the area nickname of D and the TRILL switch
nickname of RB4 to which D is attached. In encapsulating a frame nickname of RB4 to which D is attached. In encapsulating a frame
to D, it puts an area nickname of D (15918) in the egress nickname to D, it puts an area nickname of D (15918) in the egress nickname
field of the TRILL Header and puts a nickname of RB3 (44) in a field of the TRILL Header and puts a nickname of RB3 (44) in a
egress swap nickname field. egress swap nickname field.
- RB2 moves the ingress nickname to the ingress swap nickname field - RB2 moves the ingress nickname to the ingress swap nickname field
and inserts 15961, an area nickname for S, into the ingress and inserts 15961, an area nickname for S, into the ingress
nickname field. nickname field.
- RB3 swaps the egress nickname and the egress swap nickname fields, - RB3 swaps the egress nickname and the egress swap nickname fields,
which sets the egress nickname to 44. which sets the egress nickname to 44.
- RB4 learns the correspondence between the source MAC/VLAN of S and - RB4 learns the correspondence between the source MAC/VLAN of S and
the { ingress nickname, ingress swap nickname field } pair as it the { ingress nickname, ingress swap nickname field } pair as it
decapsulates and egresses the frame. decapsulates and egresses the frame.
See [DraftAggregated] for a multilevel proposal using aggregated swap See [DraftAggregated] for a multilevel proposal using aggregated swap
INTERNET-DRAFT Multilevel TRILL
nicknames with a single nickname representing an area. nicknames with a single nickname representing an area.
2.2.2.3 Comparison 2.2.2.3. Comparison
The Border Learning variant described in Section 2.2.2.1 above The Border Learning variant described in Section 2.2.2.1 above
minimizes the change in non-border TRILL switches but imposes the minimizes the change in non-border TRILL switches but imposes the
burden on border TRILL switches of learning and doing lookups in all burden on border TRILL switches of learning and doing lookups in all
the end station MAC addresses within their area(s) that are used for the end station MAC addresses within their area(s) that are used for
communication outside the area. This burden could be reduced by communication outside the area. This burden could be reduced by
decreasing the area size and increasing the number of areas. decreasing the area size and increasing the number of areas.
The Swap Nickname Field variant described in Section 2.2.2.2 The Swap Nickname Field variant described in Section 2.2.2.2
eliminates the extra address learning burden on border TRILL switches eliminates the extra address learning burden on border TRILL switches
but requires changes to the TRILL data packet header and more but requires changes to the TRILL data packet header and more
extensive changes to non-border TRILL switches. In particular, with extensive changes to non-border TRILL switches. In particular, with
this alternative, non-border TRILL switches must learn to associate this alternative, non-border TRILL switches must learn to associate
both a TRILL switch nickname and an area nickname with end station both a TRILL switch nickname and an area nickname with end station
MAC/label pairs (except for addresses that are local to their area). MAC/label pairs (except for addresses that are local to their area).
The Swap Nickname Field alternative is more scalable but less The Swap Nickname Field alternative is more scalable but less
backward compatible for non-border TRILL switches. It would be backward compatible for non-border TRILL switches. It would be
possible for border and other level 2 TRILL switches to support both possible for border and other level 2 TRILL switches to support both
Border Learning, for support of legacy Level 1 TRILL switches, and Border Learning, for support of legacy Level 1 TRILL switches, and
Swap Nickname, to support Level 1 TRILL switches that understood the Swap Nickname, to support Level 1 TRILL switches that understood the
Swap Nickname method based on variations in the TRILL header but this Swap Nickname method based on variations in the TRILL header but this
would be even more complex. would be even more complex.
The requirement to change the TRILL header and fast path processing The requirement to change the TRILL header and fast path processing
to support the Swap Nickname Field variant make it impractical for to support the Swap Nickname Field variant make it impractical for
the foreseeable future. the foreseeable future.
2.3 Building Multi-Area Trees 2.3. Building Multi-Area Trees
It is easy to build a multi-area tree by building a tree in each area It is easy to build a multi-area tree by building a tree in each area
separately, (including the Level 2 "area"), and then having only a separately, (including the Level 2 "area"), and then having only a
single border TRILL switch, say RBx, in each area, attach to the single border TRILL switch, say RBx, in each area, attach to the
Level 2 area. RBx would forward all multi-destination packets Level 2 area. RBx would forward all multi-destination packets
between that area and Level 2. between that area and Level 2.
People might find this unacceptable, however, because of the desire People might find this unacceptable, however, because of the desire
to path split (not always sending all multi-destination traffic to path split (not always sending all multi-destination traffic
through the same border TRILL switch). through the same border TRILL switch).
This is the same issue as with multiple ingress TRILL switches This is the same issue as with multiple ingress TRILL switches
injecting traffic from a pseudonode, and can be solved with the injecting traffic from a pseudonode, and can be solved with the
mechanism that was adopted for that purpose: the affinity TLV mechanism that was adopted for that purpose: the affinity TLV
INTERNET-DRAFT Multilevel TRILL
[RFC7783]. For each tree in the area, at most one border RB [RFC7783]. For each tree in the area, at most one border RB
announces itself in an affinity TLV with that tree name. announces itself in an affinity TLV with that tree name.
2.4 The RPF Check for Trees 2.4. The RPF Check for Trees
For multi-destination data originating locally in RBx's area, For multi-destination data originating locally in RBx's area,
computation of the RPF check is done as today. For multi-destination computation of the RPF check is done as today. For multi-destination
packets originating outside RBx's area, computation of the RPF check packets originating outside RBx's area, computation of the RPF check
must be done based on which one of the border TRILL switches (say must be done based on which one of the border TRILL switches (say
RB1, RB2, or RB3) injected the packet into the area. RB1, RB2, or RB3) injected the packet into the area.
A TRILL switch, say RB4, located inside an area, must be able to know A TRILL switch, say RB4, located inside an area, must be able to know
which of RB1, RB2, or RB3 transitioned the packet into the area from which of RB1, RB2, or RB3 transitioned the packet into the area from
Level 2 (or into Level 2 from an area). Level 2 (or into Level 2 from an area).
This could be done based on having the DBRB announce the transitioner This could be done based on having the DBRB announce the transitioner
assignments to all the TRILL switches in the area, or the Affinity assignments to all the TRILL switches in the area, or the Affinity
TLV mechanism given in [RFC7783], or a New Tree Encoding mechanism TLV mechanism given in [RFC7783], or a New Tree Encoding mechanism
discussed in Section 4.1.1. discussed in Section 4.1.1.
2.5 Area Nickname Acquisition 2.5. Area Nickname Acquisition
In the aggregated nickname alternative, each area must acquire a In the aggregated nickname alternative, each area must acquire a
unique area nickname or can be identified by the set of border TRILL unique area nickname or can be identified by the set of border TRILL
switches. It is probably simpler to allocate a block of nicknames switches. It is probably simpler to allocate a block of nicknames
(say, the top 4000) to either (1) represent areas and not specific (say, the top 4000) to either (1) represent areas and not specific
TRILL switches or (2) used by border TRILL switches if the set of TRILL switches or (2) used by border TRILL switches if the set of
such border TRILL switches represent the area. such border TRILL switches represent the area.
The nicknames used for area identification need to be advertised and The nicknames used for area identification need to be advertised and
acquired through Level 2. acquired through Level 2.
Within an area, all the border TRILL switches can discover each other Within an area, all the border TRILL switches can discover each other
through the Level 1 link state database, by using the IS-IS attach through the Level 1 link state database, by using the IS-IS attach
bit or by explicitly advertising in their LSP "I am a border bit or by explicitly advertising in their LSP "I am a border
RBridge". RBridge".
Of the border TRILL switches, one will have highest priority (say Of the border TRILL switches, one will have highest priority (say
RB7). RB7 can dynamically participate, in Level 2, to acquire a RB7). RB7 can dynamically participate, in Level 2, to acquire a
nickname for identifying the area. Alternatively, RB7 could give the nickname for identifying the area. Alternatively, RB7 could give the
area a pseudonode IS-IS ID, such as RB7.5, within Level 2. So an area a pseudonode IS-IS ID, such as RB7.5, within Level 2. So an
area would appear, in Level 2, as a pseudonode and the pseudonode area would appear, in Level 2, as a pseudonode and the pseudonode
could participate, in Level 2, to acquire a nickname for the area. could participate, in Level 2, to acquire a nickname for the area.
Within Level 2, all the border TRILL switches for an area can Within Level 2, all the border TRILL switches for an area can
advertise reachability to the area, which would mean connectivity to advertise reachability to the area, which would mean connectivity to
INTERNET-DRAFT Multilevel TRILL
a nickname identifying the area. a nickname identifying the area.
2.6 Link State Representation of Areas 2.6. Link State Representation of Areas
Within an area, say area A1, there is an election for the DBRB, Within an area, say area A1, there is an election for the DBRB,
(Designated Border RBridge), say RB1. This can be done through LSPs (Designated Border RBridge), say RB1. This can be done through LSPs
within area A1. The border TRILL switches announce themselves, within area A1. The border TRILL switches announce themselves,
together with their DBRB priority. (Note that the election of the together with their DBRB priority. (Note that the election of the
DBRB cannot be done based on Hello messages, because the border TRILL DBRB cannot be done based on Hello messages, because the border TRILL
switches are not necessarily physical neighbors of each other. They switches are not necessarily physical neighbors of each other. They
can, however, reach each other through connectivity within the area, can, however, reach each other through connectivity within the area,
which is why it will work to find each other through Level 1 LSPs.) which is why it will work to find each other through Level 1 LSPs.)
RB1 can acquire an area nickname (in the aggregated nickname RB1 can acquire an area nickname (in the aggregated nickname
approach) and may give the area a pseudonode IS-IS ID (just like the approach) and may give the area a pseudonode IS-IS ID (just like the
DRB would give a pseudonode IS-IS ID to a link) depending on how the DRB would give a pseudonode IS-IS ID to a link) depending on how the
area nickname is handled. RB1 advertises, in area A1, an area area nickname is handled. RB1 advertises, in area A1, an area
nickname that RB1 has acquired (and what the pseudonode IS-IS ID for nickname that RB1 has acquired (and what the pseudonode IS-IS ID for
skipping to change at page 20, line 5 skipping to change at page 18, line 38
listeners and labels). All the other border TRILL switches for the listeners and labels). All the other border TRILL switches for the
area announce (in their LSP) attachment to that area. area announce (in their LSP) attachment to that area.
Within Level 2, RB1 generates a Level 2 LSP on behalf of the area. Within Level 2, RB1 generates a Level 2 LSP on behalf of the area.
The same pseudonode ID could be used within Level 1 and Level 2, for The same pseudonode ID could be used within Level 1 and Level 2, for
the area. (There does not seem any reason why it would be useful for the area. (There does not seem any reason why it would be useful for
it to be different, but there's also no reason why it would need to it to be different, but there's also no reason why it would need to
be the same). Likewise, all the area A1 border TRILL switches would be the same). Likewise, all the area A1 border TRILL switches would
announce, in their Level 2 LSPs, connection to the area. announce, in their Level 2 LSPs, connection to the area.
INTERNET-DRAFT Multilevel TRILL 3. Area Partition
3. Area Partition
It is possible for an area to become partitioned, so that there is It is possible for an area to become partitioned, so that there is
still a path from one section of the area to the other, but that path still a path from one section of the area to the other, but that path
is via the Level 2 area. is via the Level 2 area.
With multilevel TRILL, an area will naturally break into two areas in With multilevel TRILL, an area will naturally break into two areas in
this case. this case.
Area addresses might be configured to ensure two areas are not Area addresses might be configured to ensure two areas are not
inadvertently connected. Area addresses appear in Hellos and LSPs inadvertently connected. Area addresses appear in Hellos and LSPs
within the area. If two chunks, connected only via Level 2, were within the area. If two chunks, connected only via Level 2, were
configured with the same area address, this would not cause any configured with the same area address, this would not cause any
problems. (They would just operate as separate Level 1 areas.) problems. (They would just operate as separate Level 1 areas.)
A more serious problem occurs if the Level 2 area is partitioned in A more serious problem occurs if the Level 2 area is partitioned in
such a way that it could be healed by using a path through a Level 1 such a way that it could be healed by using a path through a Level 1
area. TRILL will not attempt to solve this problem. Within the Level area. TRILL will not attempt to solve this problem. Within the
1 area, a single border RBridge will be the DBRB, and will be in Level 1 area, a single border RBridge will be the DBRB, and will be
charge of deciding which (single) RBridge will transition any in charge of deciding which (single) RBridge will transition any
particular multi-destination packets between that area and Level 2. particular multi-destination packets between that area and Level 2.
If the Level 2 area is partitioned, this will result in multi- If the Level 2 area is partitioned, this will result in multi-
destination data only reaching the portion of the TRILL campus destination data only reaching the portion of the TRILL campus
reachable through the partition attached to the TRILL switch that reachable through the partition attached to the TRILL switch that
transitions that packet. It will not cause a loop. transitions that packet. It will not cause a loop.
INTERNET-DRAFT Multilevel TRILL 4. Multi-Destination Scope
4. Multi-Destination Scope
There are at least two reasons it would be desirable to be able to There are at least two reasons it would be desirable to be able to
mark a multi-destination packet with a scope that indicates the mark a multi-destination packet with a scope that indicates the
packet should not exit the area, as follows: packet should not exit the area, as follows:
1. To address an issue in the border learning variant of the 1. To address an issue in the border learning variant of the
aggregated nickname alternative, when a unicast packet turns into aggregated nickname alternative, when a unicast packet turns into
a multi-destination packet when transitioning from Level 2 to a multi-destination packet when transitioning from Level 2 to
Level 1, as discussed in Section 4.1. Level 1, as discussed in Section 4.1.
2. To constrain the broadcast domain for certain discovery, 2. To constrain the broadcast domain for certain discovery,
directory, or service protocols as discussed in Section 4.2. directory, or service protocols as discussed in Section 4.2.
Multi-destination packet distribution scope restriction could be done Multi-destination packet distribution scope restriction could be done
in a number of ways. For example, there could be a flag in the packet in a number of ways. For example, there could be a flag in the
that means "for this area only". However, the technique that might packet that means "for this area only". However, the technique that
require the least change to TRILL switch fast path logic would be to might require the least change to TRILL switch fast path logic would
indicate this in the egress nickname that designates the distribution be to indicate this in the egress nickname that designates the
tree being used. There could be two general tree nicknames for each distribution tree being used. There could be two general tree
tree, one being for distribution restricted to the area and the other nicknames for each tree, one being for distribution restricted to the
being for multi-area trees. Or there would be a set of N (perhaps 16) area and the other being for multi-area trees. Or there would be a
special currently reserved nicknames used to specify the N highest set of N (perhaps 16) special currently reserved nicknames used to
priority trees but with the variation that if the special nickname is specify the N highest priority trees but with the variation that if
used for the tree, the packet is not transitioned between areas. Or the special nickname is used for the tree, the packet is not
one or more special trees could be built that were restricted to the transitioned between areas. Or one or more special trees could be
local area. built that were restricted to the local area.
4.1 Unicast to Multi-destination Conversions 4.1. Unicast to Multi-destination Conversions
In the border learning variant of the aggregated nickname In the border learning variant of the aggregated nickname
alternative, the following situation may occur: alternative, the following situation may occur: - a unicast packet
- a unicast packet might be known at the Level 1 to Level 2 might be known at the Level 1 to Level 2 transition and be
transition and be forwarded as a unicast packet to the least cost forwarded as a unicast packet to the least cost border TRILL
border TRILL switch advertising connectivity to the destination switch advertising connectivity to the destination area, but
area, but - upon arriving at the border TRILL switch, it turns out to have
- upon arriving at the border TRILL switch, it turns out to have an an unknown destination { MAC, Data Label } pair.
unknown destination { MAC, Data Label } pair.
In this case, the packet must be converted into a multi-destination In this case, the packet must be converted into a multi-destination
packet and flooded in the destination area. However, if the border packet and flooded in the destination area. However, if the border
TRILL switch doing the conversion is not the border TRILL switch TRILL switch doing the conversion is not the border TRILL switch
designated to transition the resulting multi-destination packet, designated to transition the resulting multi-destination packet,
there is the danger that the designated transitioner may pick up the there is the danger that the designated transitioner may pick up the
packet and flood it back into Level 2 from which it may be flooded packet and flood it back into Level 2 from which it may be flooded
into multiple areas. This danger can be avoided by restricting any into multiple areas. This danger can be avoided by restricting any
multi-destination packet that results from such a conversion to the multi-destination packet that results from such a conversion to the
destination area as described above. destination area as described above.
INTERNET-DRAFT Multilevel TRILL
Alternatively, a multi-destination packet intended only for the area Alternatively, a multi-destination packet intended only for the area
could be tunneled (within the area) to the RBridge RBx, that is the could be tunneled (within the area) to the RBridge RBx, that is the
appointed transitioner for that form of packet (say, based on VLAN or appointed transitioner for that form of packet (say, based on VLAN or
FGL), with instructions that RBx only transmit the packet within the FGL), with instructions that RBx only transmit the packet within the
area, and RBx could initiate the multi-destination packet within the area, and RBx could initiate the multi-destination packet within the
area. Since RBx introduced the packet, and is the only one allowed area. Since RBx introduced the packet, and is the only one allowed
to transition that packet to Level 2, this would accomplish scoping to transition that packet to Level 2, this would accomplish scoping
of the packet to within the area. Since this case only occurs in the of the packet to within the area. Since this case only occurs in the
unusual case when unicast packets need to be turned into multi- unusual case when unicast packets need to be turned into multi-
destination as described above, the suboptimality of tunneling destination as described above, the suboptimality of tunneling
between the border TRILL switch that receives the unicast packet and between the border TRILL switch that receives the unicast packet and
the appointed level transitioner for that packet, might not be an the appointed level transitioner for that packet, might not be an
issue. issue.
4.1.1 New Tree Encoding 4.1.1. New Tree Encoding
The current encoding, in a TRILL header, of a tree, is of the The current encoding, in a TRILL header, of a tree, is of the
nickname of the tree root. This requires all 16 bits of the egress nickname of the tree root. This requires all 16 bits of the egress
nickname field. TRILL could instead, for example, use the bottom 6 nickname field. TRILL could instead, for example, use the bottom 6
bits to encode the tree number (allowing 64 trees), leaving 10 bits bits to encode the tree number (allowing 64 trees), leaving 10 bits
to encode information such as: to encode information such as:
o scope: a flag indicating whether it should be single area only, or - scope: a flag indicating whether it should be single area only, or
entire campus entire campus
o border injector: an indicator of which of the k border TRILL - border injector: an indicator of which of the k border TRILL
switches injected this packet switches injected this packet
If TRILL were to adopt this new encoding, any of the TRILL switches If TRILL were to adopt this new encoding, any of the TRILL switches
in an edge group could inject a multi-destination packet. This would in an edge group could inject a multi-destination packet. This would
require all TRILL switches to be changed to understand the new require all TRILL switches to be changed to understand the new
encoding for a tree, and it would require a TLV in the LSP to encoding for a tree, and it would require a TLV in the LSP to
indicate which number each of the TRILL switches in an edge group indicate which number each of the TRILL switches in an edge group
would be. would be.
While there are a number of advantages to this technique, it requires While there are a number of advantages to this technique, it requires
fast path logic changes and thus its deployment is not practical at fast path logic changes and thus its deployment is not practical at
this time. It is included here for completeness. this time. It is included here for completeness.
4.2 Selective Broadcast Domain Reduction 4.2. Selective Broadcast Domain Reduction
There are a number of service, discovery, and directory protocols There are a number of service, discovery, and directory protocols
that, for convenience, are accessed via multicast or broadcast that, for convenience, are accessed via multicast or broadcast
frames. Examples are DHCP, (Dynamic Host Configuration Protocol) the frames. Examples are DHCP, (Dynamic Host Configuration Protocol) the
NetBIOS Service Location Protocol, and multicast DNS (Domain Name NetBIOS Service Location Protocol, and multicast DNS (Domain Name
Service). Service).
INTERNET-DRAFT Multilevel TRILL
Some such protocols provide means to restrict distribution to an IP Some such protocols provide means to restrict distribution to an IP
subnet or equivalent to reduce size of the broadcast domain they are subnet or equivalent to reduce size of the broadcast domain they are
using and then provide a proxy that can be placed in that subnet to using and then provide a proxy that can be placed in that subnet to
use unicast to access a service elsewhere. In cases where a proxy use unicast to access a service elsewhere. In cases where a proxy
mechanism is not currently defined, it may be possible to create one mechanism is not currently defined, it may be possible to create one
that references a central server or cache. With multilevel TRILL, it that references a central server or cache. With multilevel TRILL, it
is possible to construct very large IP subnets that could become is possible to construct very large IP subnets that could become
saturated with multi-destination traffic of this type unless packets saturated with multi-destination traffic of this type unless packets
can be further restricted in their distribution. Such restricted can be further restricted in their distribution. Such restricted
distribution can be accomplished for some protocols, say protocol P, distribution can be accomplished for some protocols, say protocol P,
in a variety of ways including the following: in a variety of ways including the following:
- Either (1) at all ingress TRILL switches in an area place all - Either (1) at all ingress TRILL switches in an area place all
protocol P multi-destination packets on a distribution tree in protocol P multi-destination packets on a distribution tree in
such a way that the packets are restricted to the area or (2) at such a way that the packets are restricted to the area or (2) at
all border TRILL switches between that area and Level 2, detect all border TRILL switches between that area and Level 2, detect
protocol P multi-destination packets and do not transition them. protocol P multi-destination packets and do not transition them.
- Then place one, or a few for redundancy, protocol P proxies inside - Then place one, or a few for redundancy, protocol P proxies inside
each area where protocol P may be in use. These proxies unicast each area where protocol P may be in use. These proxies unicast
protocol P requests or other messages to the actual campus protocol P requests or other messages to the actual campus
server(s) for P. They also receive unicast responses or other server(s) for P. They also receive unicast responses or other
messages from those servers and deliver them within the area via messages from those servers and deliver them within the area via
unicast, multicast, or broadcast as appropriate. (Such proxies unicast, multicast, or broadcast as appropriate. (Such proxies
would not be needed if it was acceptable for all protocol P would not be needed if it was acceptable for all protocol P
traffic to be restricted to an area.) traffic to be restricted to an area.)
While it might seem logical to connect the campus servers to TRILL While it might seem logical to connect the campus servers to TRILL
switches in Level 2, they could be placed within one or more areas so switches in Level 2, they could be placed within one or more areas so
that, in some cases, those areas might not require a local proxy that, in some cases, those areas might not require a local proxy
server. server.
INTERNET-DRAFT Multilevel TRILL 5. Co-Existence with Old TRILL switches
5. Co-Existence with Old TRILL switches
TRILL switches that are not multilevel aware may have a problem with TRILL switches that are not multilevel aware may have a problem with
calculating RPF Check and filtering information, since they would not calculating RPF Check and filtering information, since they would not
be aware of the assignment of border TRILL switch transitioning. be aware of the assignment of border TRILL switch transitioning.
A possible solution, as long as any old TRILL switches exist within A possible solution, as long as any old TRILL switches exist within
an area, is to have the border TRILL switches elect a single DBRB an area, is to have the border TRILL switches elect a single DBRB
(Designated Border RBridge), and have all inter-area traffic go (Designated Border RBridge), and have all inter-area traffic go
through the DBRB (unicast as well as multi-destination). If that through the DBRB (unicast as well as multi-destination). If that
DBRB goes down, a new one will be elected, but at any one time, all DBRB goes down, a new one will be elected, but at any one time, all
inter-area traffic (unicast as well as multi-destination) would go inter-area traffic (unicast as well as multi-destination) would go
through that one DRBR. However this eliminates load splitting at through that one DRBR. However this eliminates load splitting at
level transition. level transition.
INTERNET-DRAFT Multilevel TRILL 6. Multi-Access Links with End Stations
6. Multi-Access Links with End Stations
Care must be taken in the case where there are multiple TRILL Care must be taken in the case where there are multiple TRILL
switches on a link with one or more end stations, keeping in mind switches on a link with one or more end stations, keeping in mind
that end stations are TRILL ignorant. In particular, it is essential that end stations are TRILL ignorant. In particular, it is essential
that only one TRILL switch ingress/egress any given data packet that only one TRILL switch ingress/egress any given data packet from/
from/to an end station so that connectivity is provided to that end to an end station so that connectivity is provided to that end
station without duplicating end station data and that loops are not station without duplicating end station data and that loops are not
formed due to one TRILL switch egressing data in native form (i.e., formed due to one TRILL switch egressing data in native form (i.e.,
with no TRILL header) and having that data re-ingressed by another with no TRILL header) and having that data re-ingressed by another
TRILL switch on the link. TRILL switch on the link.
With existing, single level TRILL, this is done by electing a single With existing, single level TRILL, this is done by electing a single
Designated RBridge per link, which appoints a single Appointed Designated RBridge per link, which appoints a single Appointed
Forwarder per VLAN [RFC7177] [RFC8139]. This mechanism depends on the Forwarder per VLAN [RFC7177] [RFC8139]. This mechanism depends on
RBridges establishing adjacency. But suppose there are two (or more) the RBridges establishing adjacency. But suppose there are two (or
TRILL switches on a link in different areas, say RB1 in area A1 and more) TRILL switches on a link in different areas, say RB1 in area A1
RB2 in area A2, as shown below, and that the link also has one or and RB2 in area A2, as shown below, and that the link also has one or
more end stations attached. If RB1 and RB2 ignore each other's more end stations attached. If RB1 and RB2 ignore each other's
Hellos because they are in different areas, as they are required to Hellos because they are in different areas, as they are required to
do under normal IS-IS PDU processing rules, then they will not form do under normal IS-IS PDU processing rules, then they will not form
an adjacency. If they are not adjacent, they will ignore each other an adjacency. If they are not adjacent, they will ignore each other
for the Appointed Forwarder mechanism and will both ingress/egress for the Appointed Forwarder mechanism and will both ingress/egress
end station traffic on the link causing loops and duplication. end station traffic on the link causing loops and duplication.
The problem is not avoiding adjacency or avoiding TRILL Data packet The problem is not avoiding adjacency or avoiding TRILL Data packet
transfer between RB1 and RB2. The area address mechanism of IS-IS or transfer between RB1 and RB2. The area address mechanism of IS-IS or
possibly the use of topology constraints or the like does that quite possibly the use of topology constraints or the like does that quite
well. The problem stems from end stations being TRILL ignorant so well. The problem stems from end stations being TRILL ignorant so
care must be taken that multiple RBridges on a link do not ingress care must be taken that multiple RBridges on a link do not ingress
the same frame originated by an end station and so that an RBridge the same frame originated by an end station and so that an RBridge
does not ingress a native frame egressed by a different RBridge does not ingress a native frame egressed by a different RBridge
because the RBridge mistakes the frame for a frame originated by an because the RBridge mistakes the frame for a frame originated by an
end station. end station.
+--------------------------------------------+ +--------------------------------------------+
| Level 2 | | Level 2 |
+----------+---------------------+-----------+ +----------+---------------------+-----------+
| Area A1 | | Area A2 | | Area A1 | | Area A2 |
skipping to change at page 26, line 5 skipping to change at page 23, line 23
| +-+-+ | | +-+-+ | | +-+-+ | | +-+-+ |
| | | | | | | | | | | |
+-----|----+ +-----|-----+ +-----|----+ +-----|-----+
| | | |
--+---------+-------------+--------+-- Link --+---------+-------------+--------+-- Link
| | | |
+------+------+ +--+----------+ +------+------+ +--+----------+
| End Station | | End Station | | End Station | | End Station |
+-------------+ +-------------+ +-------------+ +-------------+
INTERNET-DRAFT Multilevel TRILL
A simple rule, which is preferred, is to use the TRILL switch or A simple rule, which is preferred, is to use the TRILL switch or
switches having the lowest numbered area, comparing area numbers as switches having the lowest numbered area, comparing area numbers as
unsigned integers, to handle all native traffic to/from end stations unsigned integers, to handle all native traffic to/from end stations
on the link. This would automatically give multilevel-ignorant legacy on the link. This would automatically give multilevel-ignorant
TRILL switches, that would be using area number zero, highest legacy TRILL switches, that would be using area number zero, highest
priority for handling end station traffic, which they would try to do priority for handling end station traffic, which they would try to do
anyway. anyway.
Other methods are possible. For example doing the selection of Other methods are possible. For example doing the selection of
Appointed Forwarders and of the TRILL switch in charge of that Appointed Forwarders and of the TRILL switch in charge of that
selection across all TRILL switches on the link regardless of area. selection across all TRILL switches on the link regardless of area.
However, a special case would then have to be made for legacy TRILL However, a special case would then have to be made for legacy TRILL
switches using area number zero. switches using area number zero.
These techniques require multilevel aware TRILL switches to take These techniques require multilevel aware TRILL switches to take
actions based on Hellos from RBridges in other areas even though they actions based on Hellos from RBridges in other areas even though they
will not form an adjacency with such RBridges. However, the action is will not form an adjacency with such RBridges. However, the action
quite simple in the preferred case: if a TRILL switch sees Hellos is quite simple in the preferred case: if a TRILL switch sees Hellos
from lower numbered areas, then they would not act as an Appointed from lower numbered areas, then they would not act as an Appointed
Forwarder on the link until the Hello timer for such Hellos had Forwarder on the link until the Hello timer for such Hellos had
expired. expired.
INTERNET-DRAFT Multilevel TRILL 7. Summary
7. Summary
This draft describes potential scaling issues in TRILL and discusses This draft describes potential scaling issues in TRILL and discusses
possible approaches to multilevel TRILL as a solution or element of a possible approaches to multilevel TRILL as a solution or element of a
solution to most of them. solution to most of them.
The alternative using aggregated areas in multilevel TRILL has The alternative using aggregated areas in multilevel TRILL has
significant advantages in terms of scalability over using campus wide significant advantages in terms of scalability over using campus wide
unique nicknames, not just in avoiding nickname exhaustion, but by unique nicknames, not just in avoiding nickname exhaustion, but by
allowing RPF Checks to be aggregated based on an entire area. allowing RPF Checks to be aggregated based on an entire area.
However, the alternative of using unique nicknames is simpler and However, the alternative of using unique nicknames is simpler and
avoids the changes in border TRILL switches required to support avoids the changes in border TRILL switches required to support
aggregated nicknames. It is possible to support both. For example, a aggregated nicknames. It is possible to support both. For example,
TRILL campus could use simpler unique nicknames until scaling begins a TRILL campus could use simpler unique nicknames until scaling
to cause problems and then start to introduce areas with aggregated begins to cause problems and then start to introduce areas with
nicknames. aggregated nicknames.
Some multilevel TRILL issues are not difficult, such as dealing with Some multilevel TRILL issues are not difficult, such as dealing with
partitioned areas. Other issues are more difficult, especially partitioned areas. Other issues are more difficult, especially
dealing with old TRILL switches that are multilevel ignorant. dealing with old TRILL switches that are multilevel ignorant.
INTERNET-DRAFT Multilevel TRILL 8. Security Considerations
8. Security Considerations
This informational document explores alternatives for the design of This informational document explores alternatives for the design of
multilevel IS-IS in TRILL and generally does not consider security multilevel IS-IS in TRILL and generally does not consider security
issues. issues.
If aggregated nicknames are used in two areas that have the same area If aggregated nicknames are used in two areas that have the same area
address and those areas merge, there is a possibility of a transient address and those areas merge, there is a possibility of a transient
nickname collision that would not occur with unique nicknames. Such a nickname collision that would not occur with unique nicknames. Such
collision could cause a data packet to be delivered to the wrong a collision could cause a data packet to be delivered to the wrong
egress TRILL switch but it would still not be delivered to any end egress TRILL switch but it would still not be delivered to any end
station in the wrong Data Label; thus such delivery would still station in the wrong Data Label; thus such delivery would still
conform to security policies. conform to security policies.
For general TRILL Security Considerations, see [RFC6325]. For general TRILL Security Considerations, see [RFC6325].
9. IANA Considerations 9. IANA Considerations
This document requires no IANA actions. RFC Editor: Please remove This document requires no IANA actions. RFC Editor: Please remove
this section before publication. this section before publication.
INTERNET-DRAFT Multilevel TRILL 10. References
Normative References
[IS-IS] - ISO/IEC 10589:2002, Second Edition, "Intermediate System to
Intermediate System Intra-Domain Routing Exchange Protocol for
use in Conjunction with the Protocol for Providing the
Connectionless-mode Network Service (ISO 8473)", 2002.
[RFC6325] - Perlman, R., Eastlake 3rd, D., Dutt, D., Gai, S., and A.
Ghanwani, "Routing Bridges (RBridges): Base Protocol
Specification", RFC 6325, July 2011.
[RFC7177] - Eastlake 3rd, D., Perlman, R., Ghanwani, A., Yang, H.,
and V. Manral, "Transparent Interconnection of Lots of Links
(TRILL): Adjacency", RFC 7177, May 2014, <http://www.rfc-
editor.org/info/rfc7177>.
[RFC7780] - Eastlake 3rd, D., Zhang, M., Perlman, R., Banerjee, A.,
Ghanwani, A., and S. Gupta, "Transparent Interconnection of
Lots of Links (TRILL): Clarifications, Corrections, and
Updates", RFC 7780, DOI 10.17487/RFC7780, February 2016,
<http://www.rfc-editor.org/info/rfc7780>.
[RFC8139] - Eastlake, D., Li, Y., Umair, M., Banerjee, A., and F. Hu,
"Transparent Interconnection of Lots of Links (TRILL):
Appointed Forwarders", RFC 8139, DOI 10.17487/RFC8139, June
2017, <http://www.rfc-editor.org/info/rfc8139>.
Informative References
[InterCon] - Perlman, R., "Interconnections, Second Edition; Bridges,
Routers, Switches, and Internetworking Protocols", Addison
Wesley, ISBN 0-201-63448-1, September 1999.
[RFC3194] - Durand, A. and C. Huitema, "The H-Density Ratio for 10.1. References
Address Assignment Efficiency An Update on the H ratio", RFC
3194, DOI 10.17487/RFC3194, November 2001, <http://www.rfc-
editor.org/info/rfc3194>.
[RFC6361] - Carlson, J. and D. Eastlake 3rd, "PPP Transparent [RFC6325] Perlman, R., Eastlake 3rd, D., Dutt, D., Gai, S., and A.
Interconnection of Lots of Links (TRILL) Protocol Control Ghanwani, "Routing Bridges (RBridges): Base Protocol
Protocol", RFC 6361, August 2011. Specification", RFC 6325, DOI 10.17487/RFC6325, July 2011,
<http://www.rfc-editor.org/info/rfc6325>.
[RFC7172] - Eastlake 3rd, D., Zhang, M., Agarwal, P., Perlman, R., [RFC7177] Eastlake 3rd, D., Perlman, R., Ghanwani, A., Yang, H., and
and D. Dutt, "Transparent Interconnection of Lots of Links V. Manral, "Transparent Interconnection of Lots of Links
(TRILL): Fine-Grained Labeling", RFC 7172, May 2014 (TRILL): Adjacency", RFC 7177, DOI 10.17487/RFC7177, May
2014, <http://www.rfc-editor.org/info/rfc7177>.
[RFC7176] - Eastlake 3rd, D., Senevirathne, T., Ghanwani, A., Dutt, [RFC7780] Eastlake 3rd, D., Zhang, M., Perlman, R., Banerjee, A.,
Ghanwani, A., and S. Gupta, "Transparent Interconnection
of Lots of Links (TRILL): Clarifications, Corrections, and
Updates", RFC 7780, DOI 10.17487/RFC7780, February 2016,
<http://www.rfc-editor.org/info/rfc7780>.
INTERNET-DRAFT Multilevel TRILL [RFC8139] Eastlake 3rd, D., Li, Y., Umair, M., Banerjee, A., and F.
Hu, "Transparent Interconnection of Lots of Links (TRILL):
Appointed Forwarders", RFC 8139, DOI 10.17487/RFC8139,
June 2017, <http://www.rfc-editor.org/info/rfc8139>.
D., and A. Banerjee, "Transparent Interconnection of Lots of 10.2. References
Links (TRILL) Use of IS-IS", RFC 7176, May 2014.
[RFC7357] - Zhai, H., Hu, F., Perlman, R., Eastlake 3rd, D., and O. [RFC3194] Durand, A. and C. Huitema, "The H-Density Ratio for
Stokes, "Transparent Interconnection of Lots of Links (TRILL): Address Assignment Efficiency An Update on the H ratio",
End Station Address Distribution Information (ESADI) Protocol", RFC 3194, DOI 10.17487/RFC3194, November 2001,
RFC 7357, September 2014, <http://www.rfc- <http://www.rfc-editor.org/info/rfc3194>.
editor.org/info/rfc7357>.
[RFC7781] - Zhai, H., Senevirathne, T., Perlman, R., Zhang, M., and [RFC6361] Carlson, J. and D. Eastlake 3rd, "PPP Transparent
Y. Li, "Transparent Interconnection of Lots of Links (TRILL): Interconnection of Lots of Links (TRILL) Protocol Control
Pseudo-Nickname for Active-Active Access", RFC 7781, DOI Protocol", RFC 6361, DOI 10.17487/RFC6361, August 2011,
10.17487/RFC7781, February 2016, <http://www.rfc- <http://www.rfc-editor.org/info/rfc6361>.
editor.org/info/rfc7781>.
[RFC7783] - Senevirathne, T., Pathangi, J., and J. Hudson, [RFC7172] Eastlake 3rd, D., Zhang, M., Agarwal, P., Perlman, R., and
"Coordinated Multicast Trees (CMT) for Transparent D. Dutt, "Transparent Interconnection of Lots of Links
Interconnection of Lots of Links (TRILL)", RFC 7783, DOI (TRILL): Fine-Grained Labeling", RFC 7172,
10.17487/RFC7783, February 2016, <http://www.rfc- DOI 10.17487/RFC7172, May 2014,
editor.org/info/rfc7783>. <http://www.rfc-editor.org/info/rfc7172>.
[DraftAggregated] - Bhargav Bhikkaji, Balaji Venkat Venkataswami, [RFC7176] Eastlake 3rd, D., Senevirathne, T., Ghanwani, A., Dutt,
Narayana Perumal Swamy, "Connecting Disparate Data D., and A. Banerjee, "Transparent Interconnection of Lots
Center/PBB/Campus TRILL sites using BGP", draft-balaji-trill- of Links (TRILL) Use of IS-IS", RFC 7176,
over-ip-multi-level, Work In Progress. DOI 10.17487/RFC7176, May 2014,
<http://www.rfc-editor.org/info/rfc7176>.
[DraftUnique] - M. Zhang, D. Eastlake, R. Perlman, M. Cullen, H. [RFC7357] Zhai, H., Hu, F., Perlman, R., Eastlake 3rd, D., and O.
Zhai, D. Liu, "TRILL Multilevel Using Unique Nicknames", draft- Stokes, "Transparent Interconnection of Lots of Links
ietf-trill-multilevel-unique-nickname, Work In Progress. (TRILL): End Station Address Distribution Information
(ESADI) Protocol", RFC 7357, DOI 10.17487/RFC7357,
September 2014, <http://www.rfc-editor.org/info/rfc7357>.
[SingleName] - Mingui Zhang, et. al, "Single Area Border RBridge [RFC7781] Zhai, H., Senevirathne, T., Perlman, R., Zhang, M., and Y.
Nickname for TRILL Multilevel", draft-ietf-trill-multilevel- Li, "Transparent Interconnection of Lots of Links (TRILL):
single-nickname, Work in Progress. Pseudo-Nickname for Active-Active Access", RFC 7781,
DOI 10.17487/RFC7781, February 2016,
<http://www.rfc-editor.org/info/rfc7781>.
INTERNET-DRAFT Multilevel TRILL [RFC7783] Senevirathne, T., Pathangi, J., and J. Hudson,
"Coordinated Multicast Trees (CMT) for Transparent
Interconnection of Lots of Links (TRILL)", RFC 7783,
DOI 10.17487/RFC7783, February 2016,
<http://www.rfc-editor.org/info/rfc7783>.
Acknowledgements Acknowledgements
The helpful comments and contributions of the following are hereby The helpful comments and contributions of the following are hereby
acknowledged: acknowledged:
Alia Atlas, David Michael Bond, Dino Farinacci, Sue Hares, Gayle Alia Atlas, David Michael Bond, Dino Farinacci, Sue Hares, Gayle
Noble, Alexander Vainshtein, and Stig Venaas. Noble, Alexander Vainshtein, and Stig Venaas.
The document was prepared in raw nroff. All macros used were defined The document was prepared in raw nroff. All macros used were defined
within the source file. within the source file.
INTERNET-DRAFT Multilevel TRILL
Authors' Addresses Authors' Addresses
Radia Perlman Radia Perlman
EMC EMC
2010 256th Avenue NE, #200 2010 256th Avenue NE, #200
Bellevue, WA 98007 USA Bellevue, WA 98007 USA
EMail: radia@alum.mit.edu Email: radia@alum.mit.edu
Donald Eastlake Donald Eastlake
Huawei Technologies Huawei Technologies
155 Beaver Street 155 Beaver Street
Milford, MA 01757 USA Milford, MA 01757 USA
Phone: +1-508-333-2270 Phone: +1-508-333-2270
Email: d3e3e3@gmail.com Email: d3e3e3@gmail.com
Mingui Zhang Mingui Zhang
Huawei Technologies Huawei Technologies
No.156 Beiqing Rd. Haidian District, No.156 Beiqing Rd. Haidian District,
Beijing 100095 P.R. China Beijing 100095 P.R. China
EMail: zhangmingui@huawei.com Email: zhangmingui@huawei.com
Anoop Ghanwani Anoop Ghanwani
Dell Dell
5450 Great America Parkway 5450 Great America Parkway
Santa Clara, CA 95054 USA Santa Clara, CA 95054 USA
EMail: anoop@alumni.duke.edu Email: anoop@alumni.duke.edu
Hongjun Zhai Hongjun Zhai
Jinling Institute of Technology Jinling Institute of Technology
99 Hongjing Avenue, Jiangning District 99 Hongjing Avenue, Jiangning District
Nanjing, Jiangsu 211169 China Nanjing, Jiangsu 211169 China
EMail: honjun.zhai@tom.com Email: honjun.zhai@tom.com
INTERNET-DRAFT Multilevel TRILL
Copyright and IPR Provisions
Copyright (c) 2017 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License. The definitive version of
an IETF Document is that published by, or under the auspices of, the
IETF. Versions of IETF Documents that are published by third parties,
including those that are translated into other languages, should not
be considered to be definitive versions of IETF Documents. The
definitive version of these Legal Provisions is that published by, or
under the auspices of, the IETF. Versions of these Legal Provisions
that are published by third parties, including those that are
translated into other languages, should not be considered to be
definitive versions of these Legal Provisions. For the avoidance of
doubt, each Contributor to the IETF Standards Process licenses each
Contribution that he or she makes as part of the IETF Standards
Process to the IETF Trust pursuant to the provisions of RFC 5378. No
language to the contrary, or terms, conditions or rights that differ
from or are inconsistent with the rights and licenses granted under
RFC 5378, shall have any effect and shall be null and void, whether
published or posted by such Contributor, or included with or in such
Contribution.
 End of changes. 175 change blocks. 
458 lines changed or deleted 374 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/

mirror server hosted at Truenetwork, Russian Federation.